Social Feed

T
Last reply · posted in DISH Network Support Forum
I'm actually having WiFi problems in two spaces. The first is from the Hopper to the external router.

This is about the wireless Joey infrastructure and its Access Point.

I have 2 wireless Joeys. In our old house they worked flawlessly but here the link between their dedicated WiFi router and the Joeys is very problematic.

I suspect but can't prove since visibility into actual operation is very limited, that the access point is trying to use 5GHz and it's getting trounced on by external interference. (It could be the other way).

I see two solutions

1. Somehow limit the Joey infrastructure (the "Access point") to 2.4GHZ (or 5GHz). The access point seems to have no user accessible configuration tools.

2. I tried a powerline adapter to the weakest device. I plugged the Joey ethernet into the powerline and the Hopper ethernet into the other end's powerline. They linked up. But only briefly. The other Joey was still on WiFi and when the AP mated to the wireless unit, the first hardwired unit gave up the ethernet and switched to WiFi.

I actually don't think the problem is with the signaling but the access point. The installer used a coax-ethernet (MOCA) to move the AP into the same room as the two Joeys so both were within line of sight of the AP. The Joey would still lose the link. When they installed the dish (we did it through a move) they swapped out my old really robust AP for a new one. I think this AP isn't as good at handling interference... Dish was unable to get me one of the old style APs...
3 Replies · 189 views
Jim5506
My wireless Joey 4 is connected to an access point that connects to my Hopper with a CAT5 cable.
I had to use a longer CAT5 cable to put the AP nearer to the wireless Joey 4 for a more stable signal.
I'm on a cruise ship right now but do not remember the access point having a coax connection and I'm not sure that is the correct way to connect the access point to the Hopper.
  • Like
Reactions: charlesrshell
T
When I did the single joey experiment I connected the joey to a powerline and connected the ethernet port on the Hopper to the powerline. So both were "routing" through my home router. The AP was connected to the Hopper on the other ethernet port.

How are wired Joeys connected? Do they go through the regular "home" ethernet infrastructure? Ie, Hopper->Router, Joey1->Router Joey2->Router (perhaps using ethernet switches). There's no AP in the case of wired, right? In this situation everything gets their IP address from the router DHCP.

If I went to all powerline, I would drop the AP out of the picture, connect everything with the powerline system. Hopper->Powerline-in-bedroom, Joey1->Powerline-in-dining, Joey2->Powerline-in-living, Powerline->Router in office.

Dish told me it is not "supported" to use an all Ethernet configuration in the Wireless Joeys, but I'd seen, in fact in this forum, that it works...

I have 2 Powerline left over from old house where I had to connect security system. These are the ones with the pass-through AC outlet. They aren't exactly as they pretend to be. The adapters above block the lower outlet. The upper outlet is still open for a 3-prong plug. All of the pass-through are so large, they cover up much of the upper outlet, preventing the 3-prong from fitting and even some two prongs won't fit in the top outlet...
  • Like
Reactions: charlesrshell
HipKat
My wireless Joey 4 is connected to an access point that connects to my Hopper with a CAT5 cable.
I had to use a longer CAT5 cable to put the AP nearer to the wireless Joey 4 for a more stable signal.
I'm on a cruise ship right now but do not remember the access point having a coax connection and I'm not sure that is the correct way to connect the access point to the Hopper.
They don't. You connect it to a Hopper Internet Connecter via Ethernet cable
  • Like
Reactions: charlesrshell
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68580 Replies · 2676215 views
  • Like
Reactions: c-spand
long_time_Dish
Find A Way To My Heart - Phil Collins
  • Like
Reactions: dishstaller
dishstaller
Heart of Glass - Blondie
long_time_Dish
Magazine - Heart
H
Harden My HEART-Quarterflash
  • Like
Reactions: ClarkGable
ClarkGable
My Heart Will Go On - Celine Dion
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 10 views
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 5 views
SuperDish_Fan23
Last reply · posted in DISH Network Support Forum
Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!
29 Replies · 782 views
S
remembers when ATT had stores and leased home phones
dishstaller
My Wife was recently in an antique store and saw a rotary desk phone and it had one of those sticker overlays that had a business listed with phone number under each number on the dial. She looked closer and it had my old Radio Shack listed under the 8...she bought it. Pretty cool keepsake. Back then I rented vhs movies as well so I had it listed as Radio Shack / Movie Gallery and then the phone number.
Almighty1
I remember this in the news too...

  • Like
Reactions: charlesrshell
Bobby
I remember this in the news too...

That is a misnomer. In the old days you subscribed to telephone service. That included the telephone line and one telephone. An extension cost $1 a month extra. So that $14,000 over 42 years was for the service not the leased telephone. There is no way they paid $28 a month for 42 years for a leased telephone.
HIFI
2.webp
2.webp
anybody remember this disaster ?
  • Haha
Reactions: dishdude
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
126 Replies · 2166 views
  • Like
Reactions: Jimbo and dfergie
rvvaquero
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.
HipKat
Week Six Balls and Goats and WTH is Going On in The NFL??

Browns. 1st place in the North. Yup. Believe it or not

Chiefs. Undefeated.

Titans. Won a game ! .... Colts I know, but still.

Saints. Won a game after a while.

Steelers. Having the same season they always have. They somehow find wins on their way to an unceremonial 1st round exit. Mike Tomlin is proud.

Cards. Won a game without scoring a single touchdown

Broncos. How they manage to win games with the dogshit offense they have should be studied.

Bears. Caleb's back and so is their mojo.


Goats

NFC East. For the 2nd straight week no team from this clown show of a division won a game. Eagles are cooked without Hurts. Who's not that good anyway. Commanders suck, Dallas is well ..... Dallas and the Giants have no QB.

Ravens. Lamar is out (as usual). But still. Losing to the Browns is never ok.

Chargers. Still can't win.

Rams. So much for the powerhouse team. They are 2 games under .500

Seattle. Lost to the offenseless Broncos.
Y
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.
Johnson built it, but without the Herschel Walker trade, it never happens.
  • Like
Reactions: b4pjoe
b4pjoe
Johnson built it, but without the Herschel Walker trade, it never happens.
Jerry made himself General Manager after he bought the team but make no mistake Jimmy engineered that trade. As well as a lot of others at the time.
rvvaquero
Jimmy Johnson is a football guy. Jerry Jones is a marketer (hustler).

When I see a football player get a 15 yard penalty for unsportsmanlike conduct (like taunting) in a close game, I often wonder what he was thinking. Was he thinking, I'm doing everything I can to make this a better team and help win a championship? Or, was he saying to himself, I want everyone to notice how great I am?

Johnson inspires one, Jones the other.
  • Like
Reactions: b4pjoe and Mike0616
S
· posted in The Chit Chat Club
I haven't posted in almost 17 years. Over the air, sat, offline, anything-but-the-internet is still one of my avid pursuits. Been playing with offline tv viewing and offline web browsing. I have great appreciations for this site still being here. It's so hard to find public communities that haven't sold out to social media company.
0 Replies · 28 views
SkyWatcher57
Pub Member / Supporter
Last reply · posted in Free To Air (FTA) Discussion
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
46 Replies · 1152 views
(((Garyd)))
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
Take the cover off, show me pics of the board of the bad one and also the bottom of the board. I'm an old hardware electronics tech plus a satellite dealer; I fixed a lot of FTA and regular receivers. I may be able to fix it for you. And yes, they got hit by lightning; it's best to email me the pics at diamondsatellite@snet.net or call me at 203-232-8888. I give you a 50-50 chance of fixing it; I do have spare parts. my phone is a fliptop phone
Gary
  • Like
Reactions: navychop
navychop
More room for the return of the Plague & Pestilence?

;)
S
Hello folks, well my luck ran out last week with a nasty thunderstorm and after 39 years here, finally took a hit. Now, the FTA receivers I had for some years worked great until now. Recently picked up a fairly cheap receiver, online, KOQIT and seems to be good, but for the life of me, I cannot get the HDMI output to work with 3 of my Samsung monitors. I can hook it up to my Samsung TV and its HDMI input and it works fine. The 2 receivers I lost also worked fine with them, so am I going crazy? anyone have come across this or have any suggestions? And, since this is a somewhat cheap unit but works, what is everyone out there using for receivers these days? without breaking the bank? I enjoy watching FTA TV, so I will invest more if needed, what is a really good, detailed unit these days. I'm so use to watching a few of them HD channels. Right now I'm down to composite hookups, yuck! Any help or info would be greatly appreciated. Thanks Frank :rolleyes:
a good surge protector will help to.
  • Like
Reactions: SkyWatcher57
SkyWatcher57
Take the cover off, show me pics of the board of the bad one and also the bottom of the board. I'm an old hardware electronics tech plus a satellite dealer; I fixed a lot of FTA and regular receivers. I may be able to fix it for you. And yes, they got hit by lightning; it's best to email me the pics at diamondsatellite@snet.net or call me at 203-232-8888. I give you a 50-50 chance of fixing it; I do have spare parts. my phone is a fliptop phone
Gary
Hi Gary, still working on getting you those
Hi Gary, just saw this, ok, I'll grab some pics tomorrow and post them. thx
Still working getting you those pictures, nice weekends means yard work and fall prep, thanks
  • Like
Reactions: (((Garyd)))
k4otl
Anybody know how to add "hidden" audio channels like for 101 W Ku or 105W C band on these recvr's? I've exported the database file but don't have anything that will read or edit it.
cyberham
For 105W C, you scan in the Westwood tp normally. Then select the audio channel you want. Not necessary to manually enter. On 101W, you must manually enter.