Social Feed

oswald

Last reply Apr 1, 2006 · posted in DISH Network Support Forum

Distant HD Networks

Hi folks,

I am moving soon and have a question about distant networks. Does Dish offer the distant networks (for those eligble to receive them) in HD or just in SD? Thanks for the answer in advance!

12 Replies · 2367 views

Load Replies (12) Reply Legacy View

BigFella

Mar 31, 2006

Kirby Baker said:
There is no "psuedo" MPEG4. NY HD locals are 100% true-blooded MPEG-2 streams. The only thing is that CBS and NBC are down-rezzed to 1440x1080. From what others have said elsewhere, the LA HD locals are exactly the same. They simply have these channels set to be viewable only on MPEG4 receivers, but that has nothing to do with the channels actually being MPEG2 or 4.

I wasn't bringing up the whole down rez debate in my previous response to Lakebum - To clarify, by "pseudo" I meant that the 129 signal is MPEG2 that is "masked" as MPEG4. I agree with you that KCBS-DT on 129 was only viewable with MPEG4 capable receivers such as the 622. Never said WCBS-DT (and KCBS-DT on 148) was anything but MPEG 2.

waltinvt

Mar 31, 2006

BigFella said:
As much as I would like them in MPEG 2, I think this is wishful thinking. KCBS-DT is MPEG 4 (alright, "psuedo" MPEG4) on 129 and MPEG 2 on 148. WCBS-DT is still MPEG 2 on 61.5 but it seems any new offerings are going to be MPEG 4.

Waltinvt - Do you think it might be June? I believe Charlie mentioned that month a chat or two ago.

To my knowledge, there is no significance tied to June other than maybe in Chuck's head. The closest relevant event is that by April 30th there is supposed to be a digital signal testing mechanism in place for the "top" 100 dmas. The FCC has been predictably silent on this issue but then they told congress that the existing L-R analog prediction model was fine for digital too (and they stalled on that revelation until just days before the deadline issued by congress), so their credibility for doing anything to help sat customers remains non-existent.

There has been a fair amount said about a lot of this and other aspects of SHVERA and qualification for distant digital network signals (HD DNS) if you search here and DBSTalk.

The bottom line is this. Although they would just as soon have you believe otherwise, Dish has been allowed to provide HD DNS to qualified customers for a long time now (just as "D" has). They have chosen not to for internal reasons they they will not make public.

My personal opinion is I think Charlie is just too cheap and doesn't figure he can make any money with HD DNS but doesn't have enough guts to say so. He'd rather be vague and stall around until he can get enough HD LiLs up so that the whole DNS issue goes away.

Some (many) rural area subs will be basically screwed for a long time but he doesn't care if it's not enough to hurt him in the pocketbook.

BigFella

Mar 31, 2006

waltinvt said:
My personal opinion is I think Charlie is just too cheap and doesn't figure he can make any money with HD DNS but doesn't have enough guts to say so. He'd rather be vague and stall around until he can get enough HD LiLs up so that the whole DNS issue goes away.

Some (many) rural area subs will be basically screwed for a long time but he doesn't care if it's not enough to hurt him in the pocketbook.

Since Dish is in business to make money, I guess I'll have to agree with your opinion. I'm holding out hope however that he's figuring he needs 30 days after the April 30 date to get the HD DNS ball rolling!

I believe my situation is different than yours and other rural customers. Unlike yourself, I've got a few different options (Dish, cable and limited OTA) for local HD as I live in a suburban area north of LA (so I don't expect a lot of sympathy from those in your camp). I opted for distants when I had to make "the decision" a while back and I don't want to give those up (my wife is from NY and I enjoy the timeshifting advantage). In short, I want to have my cake and eat it too. Ideally, I would get all NY and LA HD nets from Dish. Since that's not going to happen (unless the laws change and/or the NAB lobbyists are tossed out of DC on their ear), the second best option for me is NY distants in HD from Dish and local HD from cable (as OTA signal generally sucks). Of course, if the "whole DNS issue goes away", then I'm SOL as far as distant HD is concerned because I can get local HD from Dish right now if I wanted to give up my distant SD nets.

waltinvt

Apr 1, 2006

BigFella said:
Since Dish is in business to make money, I guess I'll have to agree with your opinion. I'm holding out hope however that he's figuring he needs 30 days after the April 30 date to get the HD DNS ball rolling!

Again, HD DNS won't be any more or less allowable after April 30th than they are now. The only possible influence it may have that I can see is maybe having the digital testing option makes it more likely that more afilliates will grant waivers, since they know if a test is done and it proves in favor of the viewer, the afilliate gets stuck with the testing charges.

BigFella said:
Of course, if the "whole DNS issue goes away", then I'm SOL as far as distant HD is concerned because I can get local HD from Dish right now if I wanted to give up my distant SD nets.

If your area has HD LiLs available from Dish now, then you're already SOL regarding HD DNS even if they were to become available. To get HD LiLs, you must sub to the analog LiLs package.

Stanleee

Apr 1, 2006

Scott that beats the usual "Yes network added to the Dish lineup". We all know that wil never happen. Happy April fools day!!!!!

View all replies (12)

Gray Hair

Lifetime Supporter

Last reply Yesterday at 11:39 PM · posted in Computers and Gadgets

Repair DX100 American Electrola Radio, AM FM SW?

I have a DX100 American Electrola Radio, AM FM SW. It is a receiver only, which quit working many years ago. Several years ago the seller had stated that capacitors would need replaced because they go bad.

In this particular xxx://www.youtube.com/watch?v=3zUbXgNT8Oo they mentioned the backup battery being the problem.

Several years back when asking about having the capacitors replaced one former repairman said send it back to the factory, well there is not any. Another response several years ago from a person who repaired circuit boards for industry said they could repair it if they had a schematic, again I do not have.

This radio was built in Pittsburgh, PA out of as many American parts as they could find. Your thoughts on getting the radio to work?

24 Replies · 8252 views

Load Replies (24) Reply Legacy View

deheza

Jul 1, 2013

I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.

Reactions: Gray Hair

Gray Hair

Dec 27, 2013

deheza said:
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.

Deheza,

Thanks for your information and offer. My Radio is actually a DXC 100 as well, was a typo in the title. Am puzzled by yours not having the battery, since they only made two runs. While the schematics would be great, I believe by the amount of views it would be better to post all the information here.

I see where numerous people have posted pdf files, just not sure how they do it.

Sorry about the long response time, just was not sure how to handle it.

Thanks,

Respectively,

Gray Hair

. Raine

Dec 28, 2013

If you change that diode, make sure you know what type it is, a regular rectifier, zener, whatever, don't just throw any old diode in. Try to read the number on it and look it up. Do you have a multimeter? A lot of the things in there can be easily checked with a meter.

Trying to run it off a clean 12 V source like a battery would be a good idea, like someone else suggested. In a couple of your pictures there's a 9v regulator [7809CT], and I think I saw a 5 V regulator [7805]. The 5v probably supplies the display and the 9v the radio circuitry. If you have a meter that would be a first place to check, check the three pins on each for a 12v input, a gnd, a 5v output on the 5v and a 9v output on the 9v. Bad solder connections is another good possibility.

That radio looks to be in nice shape inside. It doesn't look like anyone's worked it over, looks nice.

The back-up battery is probably just for a memory function, when you replace it make sure you use the same type, cadmium, lithium-ion, whatever it is, it should say on it what type it is and the voltage, or have a part# that can be looked up.

Reactions: Gray Hair

OZ65

Jan 31, 2024

I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA

Revenerd

Yesterday at 6:15 PM

Another necropost here. I picked one of these up today. Does anyone out there have this manual (I'd take schematics too). I too found azenithnut's post with the missing pages 16 and 17.

(((Garyd)))

Yesterday at 11:39 PM

OZ65 said:
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA

Can you send the serial-number label and photos of the tuner board, that should help distinguish its circuit revision; collector records say serials marked OB were the second production run. Use a heat gun or hair dryer to find bad caps if it works for A FEW SECONDS ITS A BAD CAP, THAN ONLY HEAT HALF OF THE RADIO

View all replies (24)

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Yesterday at 8:05 PM · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68784 Replies · 2688279 views

Load Replies (68784) Reply Legacy View

Reactions: c-spand

harshness

Yesterday at 11:07 AM

They Call the Wind Maria - Vaughn Monroe

sdfntx

Yesterday at 12:12 PM

Maria Magenta - Donovan

long_time_Dish

Yesterday at 4:19 PM

My Maria - Brooks & Dunn

Reactions: dishstaller, RaiderPower and Bobby

RaiderPower

Yesterday at 7:06 PM

My Maria - B.W. Stevenson

Reactions: Bobby, long_time_Dish and FTA4PA

long_time_Dish

Yesterday at 8:05 PM

Don't Lose My ~~Numb~~er - Phil Collins

View all replies (68784)

TWiT Tech Podcast Network

Yesterday at 5:32 PM · posted in TWiT Tech Podcast Network

This Week in Tech 1109

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=okJLytKRbDY

Direct YouTube Link - This Week in Tech 1109
TWIT's Website
TWIT Live Feed

0 Replies · 28 views

Replies Reply Legacy View

TWiT Tech Podcast Network

Yesterday at 5:32 PM · posted in TWiT Tech Podcast Network

The Agentic Web & When AI Agents Escape Their Sandbox

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/rwJNDSWjwDY

Direct YouTube Link - The Agentic Web & When AI Agents Escape Their Sandbox
TWIT's Website
TWIT Live Feed

0 Replies · 26 views

Replies Reply Legacy View

garyreno

Last reply Yesterday at 5:12 PM · posted in DISH Network Support Forum

Updated to H715 on a Hopper 3 from H713

After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.

3 Replies · 242 views

Load Replies (3) Reply Legacy View

Reactions: Almighty1, reubenray and LQQK

Almighty1

Saturday at 3:03 PM

Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?

https://www.satelliteguys.us/xen/th...ftware-version-713-is-out.423921/post-5108817

Reactions: charlesrshell

jsmit86

Yesterday at 9:54 AM

Almighty1 said:
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?

https://www.satelliteguys.us/xen/th...ftware-version-713-is-out.423921/post-5108817

I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.

Reactions: Almighty1, reubenray and charlesrshell

Almighty1

Yesterday at 5:12 PM

jsmit86 said:
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.

Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?

Reactions: charlesrshell

Ramy

Supporting Founder

Last reply Yesterday at 4:20 PM · posted in The Sports Section

2026-27 NCAA College Football

Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.

190 Replies · 3616 views

Load Replies (190) Reply Legacy View

Reactions: Mike0616

Ronnie-

Yesterday at 3:11 PM

The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.

Roll tide.

Jimbo

Yesterday at 3:23 PM

Ronnie- said:
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.

Roll tide.

With Streaming, they should all be able to be on at night, no issue with TV slots

(Everybody can be on Peacock ... :argue

)

Ronnie-

Yesterday at 3:28 PM

Jimbo said:
With Streaming, they should all be able to be on at night, no issue with TV slots

(Everybody can be on Peacock ... )

Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.

You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.

Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.

None of them was going to be a streaming only game, and none where going on an "alternate" channel.

Jimbo

Yesterday at 3:58 PM

Ronnie- said:
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.

You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.

Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.

None of them was going to be a streaming only game, and none where going on an "alternate" channel.

Of course ... but they Could.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.

Ronnie-

Yesterday at 4:20 PM

Jimbo said:
Of course ... but they Could.

Yes. I even said so. But for reasons I gave, they won't. Wouldn't make sense for them too and they would lose money. A lot of these people that watch one of these games, watch more than one.

They want those eyeballs on as many games as possible. It just makes financial sense.

Jimbo said:
Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.

It was early. Sure.

View all replies (190)

dfergie

Staff member HERE TO HELP YOU!

Last reply Yesterday at 3:41 PM · posted in What's Cooking?

What's For Lunch?

We have a Breakfast and Dinner thread so...

Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...

5453 Replies · 336969 views

Load Replies (5453) Reply Legacy View

TRG

Oct 29, 2026

Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.

Reactions: Bobby

TRG

Oct 30, 2026

Breakfast for lunch. Crispy corned beef hash, home fries, two over easy eggs and sourdough toast.

Reactions: dfergie, osu1991 and Bobby

TRG

Nov 2, 2026

Grabbed a burrito on the run. Beef, pinto beans, green chile and cheese. Stewart's cream soda.

Reactions: Mr Tony and dfergie

dfergie

Nov 2, 2026

Beef, bean green chile, cheese homemade burritos here... Water

Reactions: TRG

dfergie

Yesterday at 3:41 PM

Juicy Lucy jalapeño burger… Tea

View all replies (5453)

Ham Radio 2.0

Yesterday at 2:32 PM · posted in Ham Radio 2.0

XTOC: Your Command Center for Off-Grid Communications | LIVE

Time for another AWESOME video from Ham Radio 2.0!

View: https://www.youtube.com/watch?v=GSYzGH16G7s

Direct YouTube Link - XTOC: Your Command Center for Off-Grid Communications | LIVE
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook

0 Replies · 34 views

Replies Reply Legacy View

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply Yesterday at 1:46 PM · posted in The Chit Chat Club

Color blind man sees full colors for first time at age 66

Videos like this can make you appreciate the things we take for granted.

View: https://www.youtube.com/shorts/a2cgQidHQJI

10 Replies · 268 views

Load Replies (10) Reply Legacy View

Reactions: dfergie, NYDutch, Bobby and 1 other person

telstar_1

Saturday at 2:02 PM

Often people who have organic vision or hearing activated as adults after never having had it cannot practically utilize it because their brains never developed the massive neural network needed to make sense of any of it.

Well, he sees in color, just differently. Can't he just enjoy that? My granny had anachromatic color blindness, meaning pretty much like a b&w tv

jayn_j

Yesterday at 10:45 AM

My son is rg colorblind, but we found there are degrees. If something is vivid red or green, he can see a hint of color. I bought him a pair of the glasses when they first came out. He said they did improve things slightly, but not to the extent they are being touted. I think they are sitting in a drawer somewhere.

dishstaller

Yesterday at 12:50 PM

jayn_j said:
My son is rg colorblind, but we found there are degrees. If something is vivid red or green, he can see a hint of color. I bought him a pair of the glasses when they first came out. He said they did improve things slightly, but not to the extent they are being touted. I think they are sitting in a drawer somewhere.

Are the glasses one size fits all or do they make different models for different degrees of colorblindness.

navychop

Yesterday at 12:56 PM

Dr Pol did not like or use his

telstar_1

Yesterday at 1:46 PM

dishstaller said:
Are the glasses one size fits all or do they make different models for different degrees of colorblindness.

It looked like there were at least three iterations to try to match up to the given individual deficit, and a test to take to determine which would best help. But at best they seem a marginal measure and not practical.

Reactions: dishstaller

View all replies (10)

Linus Tech Tips

Yesterday at 12:22 PM · posted in Linus Tech Tips

I Let My Staff Upgrade the Office (They Almost Ruined It)

Time for another AWESOME video from Linus Tech Tips!

View: https://www.youtube.com/watch?v=CrO0Timw2z4

Direct YouTube Link - I Let My Staff Upgrade the Office (They Almost Ruined It)
Linus on Facebook
The LTT Store

Search

Search

Social Feed

Distant HD Networks

Repair DX100 American Electrola Radio, AM FM SW?

Song Name Game Part 3!

This Week in Tech 1109

The Agentic Web & When AI Agents Escape Their Sandbox

Updated to H715 on a Hopper 3 from H713

2026-27 NCAA College Football

What's For Lunch?

XTOC: Your Command Center for Off-Grid Communications | LIVE

Color blind man sees full colors for first time at age 66

I Let My Staff Upgrade the Office (They Almost Ruined It)