Social Feed

Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
8 Replies · 1839 views
Neutron
If I have to call customer disservice, I will hang up if I don't get an English speaking American.

I hate saying that, but that's how I feel about call centers that are being offshored.
cablewithaview
Neutron said:
If I have to call customer disservice, I will hang up if I don't get an English speaking American.

I hate saying that, but that's how I feel about call centers that are being offshored.

I have, a time or two, gotten a Canadian call center. They was real nice to deal with.
bnaivar
When you started with "Watch this!" I thought I was going to have to hold your beer. :D
Van
Van
Neutron said:
If I have to call customer disservice, I will hang up if I don't get an English speaking American.

I hate saying that, but that's how I feel about call centers that are being offshored.

I totaly agrea and do this when Im with the customer and get the indian call center.
jbcheshire
Darn, the link is down now... I get "Service Unavailable" when i click on it...
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
205 Replies · 6084 views
  • Haha
Reactions: Mike0616
cp2k
Honestly, I would rather see an expanded bracketed playoff system than the current Conference Championship Game + playoff model we're using right now. The Conference Championships essentially allow two teams to beat up on each other, and then both typically are going to end up in the playoffs anyway unless it is one of the weaker or smaller conferences. Let them play it out on the field against others.
  • Like
Reactions: AZ.
Jimbo
Honestly, I would rather see an expanded bracketed playoff system than the current Conference Championship Game + playoff model we're using right now. The Conference Championships essentially allow two teams to beat up on each other, and then both typically are going to end up in the playoffs anyway unless it is one of the weaker or smaller conferences. Let them play it out on the field against others.
Until the Big Ten changed thier alignment, (a couple years ago) ... it was not like that at all, the East side won most years the west side represented the Big Ten, but they may have been the team with the 4th best record ...
They finally changed that, to a single conference ... but yes, in most cases, both teams will get in ... now, its a certain both will get in ...

The biggest issue with the Conference Now is the Number of TEAMS .... WAY to Many.
It would take 2-3 YEARS to do a round robin where everyone would play one another ... How do you know how good a team is when teams don't play the same teams ?
  • Haha
Reactions: meStevo
meStevo
They finally changed that, to a single conference ... but yes, in most cases, both teams will get in ... now, its a certain both will get in ...

Surprised you haven't made this claim yet.


View: https://x.com/RedditCFB/status/2119843536439005342?a=pI0NYBONwLj4vjRrQWo&s=20
  • Haha
  • Wow
Reactions: Foxbat and Yespage
Y

That'd be more than the FA Cup! Over 700 teams. It is also the most glorious tournament in the world.

Maybe it is time to get rid of the College Football season and just go to a tournament. 128 teams, fill in the bottom end with the lower division. Random draw (except the top 10 teams are in one bucket to draw from in the first and second rounds to avoid OSU v Alabama in the first round), go from 128 to 8. 4 games. Then the 8 remaining teams play 7 games against each other. Then the top two play for the title.
  • Sad
Reactions: Jimbo
osu1991
So OU gets screwed and has to move the game under threat of forfeiture, because Ole Miss didn't want to take a 7hr bus ride or find another crew for a chartered flight. When did the crew time out? A 10pm flight cancellation should have had the crew flight ready again around 8am and in Norman by 10am. Everyone else figured this out. The sec better be reimbursing OU for this BS. The weather will be 15 degrees colder in the high 30's low 40's and raining Sunday, I'm sure Ole Miss will be complaining about that too.


View: https://x.com/Oklahoma_AD/status/2121486368454885445?a=T5DkBYl8kG2ZSFPMQb8&s=20


View: https://x.com/SEC/status/2121486292131131575?a=fKBQ6EmOls8OPct7UcE&s=20
  • Like
Reactions: dfergie and AZ.
cp2k
If I were OU I'd have called their bluff and said OK, we forfeit. OU isn't going to the SEC Championship game or College Football Playoffs so it really wouldn't have mattered in the grand scheme of things.
  • Like
Reactions: dfergie and osu1991
cp2k
After the OU-Ole Miss game they literally played "Wheels on the Bus" 🤣


View: https://www.facebook.com/reel/1693381135823485
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68859 Replies · 2695501 views
  • Like
Reactions: c-spand
long_time_Dish
Let's Talk About Me - Alan Parsons Project
  • Love
Reactions: dishstaller
RaiderPower
I Wanna Talk About Me - Toby Keith
  • Love
Reactions: dishstaller
long_time_Dish
What A Shame About Me - Steely Dan
sdfntx
Me About You - The Turtles
dishstaller
Hey You - Pink Floyd
ewindowman
Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Looks like dish is Bankrupt. Filling tomorrow Tuesday June 30th
544 Replies · 20422 views
MikeD-C05
lily tomlin GIF



Wow ,who would of thought there was this much to talk about when it came to phone companies?
S
lily tomlin GIF



Wow ,who would of thought there was this much to talk about when it came to phone companies?
there's a forum called howard forums. It's all about phone companies ;)
Almighty1
there's a forum called howard forums. It's all about phone companies ;)
Yes and people will usually call it HoFo. For Internet, it was dslreports which I believe finally disappeared as there is nothing newer than January 2025 as the site was running on it's own for years.
S
Yes and people will usually call it HoFo. For Internet, it was dslreports which I believe finally disappeared as there is nothing newer than January 2025 as the site was running on it's own for years.
Dsl reports is gone i am unsure if ho fo is still around haven't been on there in years!!
  • Like
Reactions: charlesrshell
fmj77
Yes and people will usually call it HoFo. For Internet, it was dslreports which I believe finally disappeared as there is nothing newer than January 2025 as the site was running on it's own for years.
DSL reports has been replaced by broadbandbulletin.com
S
And it looks like ho fo is still around aswell
  • Like
Reactions: charlesrshell
Almighty1
Dsl reports is gone i am unsure if ho fo is still around haven't been on there in years!!
DSLReports went down in January 2025, it has been sold to someone else named Jim Mullen in 2016 but the original owner Justin Beech stopped taking care of it not too long after 2016 and the site was running on it's own for years without humans before it finally went down in January 2025.

DSLReports did come back as the main homepage only even as this minute but there is nothing else other than the homepage which was as of January 14, 2025. HoFo is still alive even as of this minute. HoFo seems more alive than DBSTalk.

1794791913040.webp
  • Like
Reactions: charlesrshell
Almighty1
DSL reports has been replaced by broadbandbulletin.com
Not quite, broadbandbulletin.com is the spiritual successor as I am part of the original group in discussions when it went down on snbforums during January 2025, I had been on DSLReports since the 1990s.

Some of the DSLReports.com people are on ho-lee-fooks.com. Ho-Lee-Fooks is an alternative community site where many former users and "refugees" of DSLReports (which permanently shut down in January/March 2025) migrated after the site's closure.

broadbandbulletin - has the same forums as DSLReports.

Ho-Lee-Fooks, unlike broadbandbulletin, have a lot of ex members of DSLReports - just a bunch of peeps that got sick of the over moderation to certain users of certain viewpoints - just lack of bias for some and too much for others. These people were there even before DSLReports shut down as Justin Beech stopped taking care of DSLReports.

There is also the /r/dslreports reddit group which originally was to verify/complain about DSLReports when it was originally down where people are there for up to two days maximum.
  • Like
Reactions: charlesrshell
M
Last reply · posted in DISH Network Support Forum
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
14 Replies · 836 views
Almighty1
Over the past few weeks, I have had problems connecting to streaming services (Netflix, HBO et al). When I go to the TV's native Channels, I have no problem. The Dish internet troubleshooter shows I have a good internet connection. I'm wondering whether it's an issue with my internet provider or a problem with the Dish software on the Hopper Plus. Anyone else seeing this?
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
  • Like
Reactions: charlesrshell
M
I have a DISH Hopper 3 (Software H713) with Hopper Plus (Software P15403). I have not tried streaming services but I primarily watch TVB Jadeworld international package which is only available by streaming and when I have an issue, I usually have to go to a non-streaming satellite channel first before the streaming channels will work again. What software versions do you have and what is the error message if any are showing on your screen? or is that Dish downloading logo just stuck and never finishes?
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
  • Like
Reactions: charlesrshell
Almighty1
I'm on H713 on the Hopper and P15403 on the Hopper Plus. It shows internet connection issues and doesn't finish loading the various services. I see the "loading circle going around. Sometimes I get a message saying that the service is having trouble loading my content and to check the internet connection.
Did it ever work correctly before? Hard to say what the problem is. Usually for streaming, it will show the Dish logo with lines sweeping down to show downloading, never seen the circle issue. Did you try a manual reboot, red button reset, power cord unplug/replug to see if it makes a difference.
  • Like
Reactions: charlesrshell
jsmit86
If the OP has a router and a managed switch, that could be the problem.
I have a Hopper 3 and 5 Joey 4s. I recently updated my Router, Switch and access points with Ubiquiti UniFi gear. I had an issue where the switch interpreted the communication between the hopper internet connection and one of the Joeys as a data loop. I had to change some settings in the switch to re-enable that port. Your router could possibly be doing the same thing blocking the connection.

If your router has a malware connection setting, try disabling it temporarily, and see if the internet comes back. Contact your ISP and see if there is a block happening at the router or switch level, or via the ISP's threat protection.
Almighty1
If the OP has a router and a managed switch, that could be the problem.
I have a Hopper 3 and 5 Joey 4s. I recently updated my Router, Switch and access points with Ubiquiti UniFi gear. I had an issue where the switch interpreted the communication between the hopper internet connection and one of the Joeys as a data loop. I had to change some settings in the switch to re-enable that port. Your router could possibly be doing the same thing blocking the connection.

If your router has a malware connection setting, try disabling it temporarily, and see if the internet comes back. Contact your ISP and see if there is a block happening at the router or switch level, or via the ISP's threat protection.
Can you share what settings you had to change?

Required Inbound & Outbound Network Ports
The standard ports designated for DISH Hopper configurations include:
    • TCP Port 80 – HTTP communication
    • TCP Port 443 – HTTPS secure communication
    • TCP Port 5678 – Neighbor Discovery / Device Sync
    • UDP Port 80 – Alternative streaming/network data
    • UDP Port 443 – Alternative secure media streams
    • UDP Port 5678 – Remote pairing and network discovery
Critical Network & Security Considerations
    • UPnP (Universal Plug and Play): Enabling UPnP on your router is the easiest way to allow the Hopper to automatically handle its own port maps.
    Internal Communication (MoCA & Local LAN): The Hopper Plus and Joeys communicate internally over your local home network using router's default internal traffic policies. Local firewall software or strict internal VLAN isolation can block the Hopper 3 from seeing the Hopper Plus or Joey extensions.

    The other thing is that these are streaming channels which was why I asked if they have worked correctly even without the Hopper Plus as checking the post history of the OP, it appears that the Hopper Plus was added around 1/2 a year ago and from looking at my own Internet settings portion, all the Hopper 3 does is really measure signal strenth for WiFi and probably just check ping times to show it is connected or not to the internet, it does not check the actual speed or latency. Since the OP has a Hopper Plus, OP can always install the Speedtest app for diagnostics and then take a photo of the results and post it here. Before 2017, I used tȯhave 6Mbps/768Kbps ADSL and even though the Hopper 1 and Hopper 3 also showed internet connectivity is okay, everytime my Ring Doorbell is uploading, it would knock the entire internet connection off-line as the upload pipe would be 100% filled by the Ring Door bell uploading the video because the ACKnowledgement packets would not have priority being sent back in time which was fixed with QoS traffic shaping but that still does not mean streaming will work as it requires at least 25Mbps minimum or more if there are other devices on the same connection sharing the bandwidth.


    ​
  • Like
Reactions: charlesrshell
jsmit86
Can you share what settings you had to change?

Required Inbound & Outbound Network Ports
The standard ports designated for DISH Hopper configurations include:
    • TCP Port 80 – HTTP communication
    • TCP Port 443 – HTTPS secure communication
    • TCP Port 5678 – Neighbor Discovery / Device Sync
    • UDP Port 80 – Alternative streaming/network data
    • UDP Port 443 – Alternative secure media streams
    • UDP Port 5678 – Remote pairing and network discovery
Critical Network & Security Considerations
    • UPnP (Universal Plug and Play): Enabling UPnP on your router is the easiest way to allow the Hopper to automatically handle its own port maps.
    • Internal Communication (MoCA & Local LAN): The Hopper Plus and Joeys communicate internally over your local home network using router's default internal traffic policies. Local firewall software or strict internal VLAN isolation can block the Hopper 3 from seeing the Hopper Plus or Joey extensions.The other thing is that these are streaming channels which was why I asked if they have worked correctly even without the Hopper Plus as checking the post history of the OP, it appears that the Hopper Plus was added around 1/2 a year ago and from looking at my own Internet settings portion, all the Hopper 3 does is really measure signal strenth for WiFi and probably just check ping times to show it is connected or not to the internet, it does not check the actual speed or latency. Since the OP has a Hopper Plus, OP can always install the Speedtest app for diagnostics and then take a photo of the results and post it here. Before 2017, I used tȯhave 6Mbps/768Kbps ADSL and even though the Hopper 1 and Hopper 3 also showed internet connectivity is okay, everytime my Ring Doorbell is uploading, it would knock the entire internet connection off-line as the upload pipe would be 100% filled by the Ring Door bell uploading the video because the ACKnowledgement packets would not have priority being sent back in time which was fixed with QoS traffic shaping but that still does not mean streaming will work as it requires at least 25Mbps minimum or more if there are other devices on the same connection sharing the bandwidth.
This was for port settings for the switch, not the router.

Originally was recommended to use EDGE vs. Infrastructure, but had to change that back to Infrastructure.

Had to leave STP (Spanning tree protocol) ON, but disable BPDU guard, and also had to disable Non-STP loop protection.

The previous settings were flagging normal dish system packets as a data loop, and fully blocked that port on the UniFI Pro Max 16 POE switch.

These were specific to my managed switch, and may not apply to the OP's issue.
  • Like
Reactions: charlesrshell
Almighty1
This was for port settings for the switch, not the router.

Originally was recommended to use EDGE vs. Infrastructure, but had to change that back to Infrastructure.

Had to leave STP (Spanning tree protocol) ON, but disable BPDU guard, and also had to disable Non-STP loop protection.

The previous settings were flagging normal dish system packets as a data loop, and fully blocked that port on the UniFI Pro Max 16 POE switch.

These were specific to my managed switch, and may not apply to the OP's issue.
Yes, a switch unlike what the consumer calls a router does not use NAT (Network Address Translation. There could be other settings in the router itself that may have a effect as well. A router does contain a Layer 2/Layer 3 switch as well. A Managed switch does contain a Layer 2/Layer 3 router as well, just not the NAT type of router.

I have both HP/Aruba and Cisco Managed 1GBit and 10Gbit switches and never had any of the issues mentioned as my modem goes into the switch first while the router(s) all are connected to the switches. As for the OP, until we know his configuration and whether it ever worked with the Hopper Plus or without the Hopper Plus and just the Hopper 3 only, it would be hard to know where the issue lies since it could be a issue with the provider, bandwidth or the network hardware configuration among other things.
  • Like
Reactions: charlesrshell
M
Did it ever work correctly before? Hard to say what the problem is. Usually for streaming, it will show the Dish logo with lines sweeping down to show downloading, never seen the circle issue. Did you try a manual reboot, red button reset, power cord unplug/replug to see if it makes a difference.
It worked fine in the past, and continues to have intermittent issues. I am also pursuing my internet provider connection though the tech that came out says the signal is good. I have cleared the cookies and memory in the TV, and I am not sure, other than the normal reboot (soft and hard) procedures for the Hopper 3, what other steps to take. The problem with this kind of issue is having it happen when a tech is monitoring. Intermittent issues are the worst! That's why I asked the original question to see if others were seeing the same type of problem.
  • Like
Reactions: charlesrshell
charlesrshell
It worked fine in the past, and continues to have intermittent issues. I am also pursuing my internet provider connection though the tech that came out says the signal is good. I have cleared the cookies and memory in the TV, and I am not sure, other than the normal reboot (soft and hard) procedures for the Hopper 3, what other steps to take. The problem with this kind of issue is having it happen when a tech is monitoring. Intermittent issues are the worst! That's why I asked the original question to see if others were seeing the same type of problem.
No problem for me.
  • Like
Reactions: MikeD-C05
Almighty1
It worked fine in the past, and continues to have intermittent issues. I am also pursuing my internet provider connection though the tech that came out says the signal is good. I have cleared the cookies and memory in the TV, and I am not sure, other than the normal reboot (soft and hard) procedures for the Hopper 3, what other steps to take. The problem with this kind of issue is having it happen when a tech is monitoring. Intermittent issues are the worst! That's why I asked the original question to see if others were seeing the same type of problem.
It would help if we knew the following, who your internet provider is and what exact speed product are you using? Also, what make/model equipment is involved is there between where the internet providers connection and the Hopper 3 + Hopper Plus? As for the tech, they are measuring the signal which only will show the signal quality between your connection and their network. What you do not know is the routing or networks it is using to reach the destination that is streaming the data to you as the issue might not even be with your Internet Service Provider but the actual path it takes for the packets going between you and the destination (DISH) and it is both directions as your equipment will always send back a ACKnowledgement packet to the destination that it has received the packet.

There is no single fixed IP address on the remote end, because a DISH Hopper 3 connects to a distributed mix of DISH-owned infrastructure and third-party cloud/CDN servers depending on what it is doing.

Remote IP Ranges by Traffic Type

• DISH Core Infrastructure & Relay Servers. DISH Network Corporation operates under AS13996, which owns roughly 3,328 IPv4 addresses. Control traffic, authorization, guide data, and Dish Anywhere relay handshakes commonly route through DISH's primary 66.170.240.0/20 block (such as 66.170.240.x through 66.170.252.x) and 67.214.63.x.
• On Demand (IPVOD) & Signal-Loss Streaming. Actual video streams for DISH On Demand and internet fallback do not come from a single static IP. Instead, they are delivered dynamically via major Content Delivery Networks (CDNs) like Akamai, Amazon CloudFront/AWS, and Fastly, meaning the destination IPs rotate frequently based on your geographic location and ISP routing.
• Built-in Third-Party Apps. If you are streaming through apps on the Hopper 3 or Hopper Plus (such as Netflix, YouTube, or Prime Video), the receiver connects directly to those respective providers' CDN edge servers.

As for what else you can try, what hard procedure are you speaking of? If it's hitting the reset button, that does not turn off the power to the circuits so there will still be some in the NVRAM. What you need to do is hold down the "power" button on the Hopper 3 itself for 20-30 seconds, this is the same thing as pulling the power cord and plugging it back in but without needing to do it as it Forces a Complete Memory Flush, Holding the physical power button down continuously for 20 to 30 seconds acts as a hard system interrupt. It completely discharges the residual voltage from the internal capacitors and forces the motherboard to drop all temporary system states and cached background logs before the software can write a persistent safety checkpoint. When you hit reset or do the menu reboot, it instructs the Linux operating system to save its active state to the NVRAM so it can resume whatever it was doing upon startup. Try that to see if it makes a difference but if you already did the power cord pull, then it shouldn't.
  • Like
Reactions: charlesrshell
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 11 views
Van
Van
Last reply · posted in What's Cooking?
Who says dinner or lunch has to be the only good meals of the day?

Honey butter grits with scrambled eggs and grilled boneless pork ribs on flakey biscuits washed down with cranberry juice.
6643 Replies · 381537 views
TRG
TRG
Bagel and cream cheese. Coffee.
osu1991
French toast, sausage and eggs at the diner across the street from the dealer after I turned in my leased EV9 this morning
  • Like
  • Love
Reactions: dfergie and TRG
TRG
TRG
Potato and egg burrito smothered with green chile sauce and cheddar. Coffee.

1675.webp
  • Like
Reactions: dfergie and Bobby
TRG
TRG
Croissant with soft honey butter and jam with strawberries and blueberries. Coffee.
  • Like
Reactions: dfergie
TRG
TRG
Sometimes biscuits and gravy with a mug of coffee is all I want.

bng.webp
  • Like
Reactions: dfergie and Bobby
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club

The number-one US state for EV growth, according to the June 22 Yardi report?
Oklahoma.


:eek


It has no ZEV mandates and "minimal" incentives, Yardi says, but also has cheap electricity, high multi-car household rates (so, for example, a non-Lightning Ford F-150 pulls their trailers), and a consumer base willing to switch.
133 Replies · 1574 views
dishstaller
IF they had made the cyber truck more like a conventional truck, more would have bought it. There is a REASON trucks all have a very similar layout....it's what people want AND it serves the purposes those of us who have a truck needs.
  • Like
Reactions: osu1991
harshness
There is a REASON trucks all have a very similar layout....it's what people want AND it serves the purposes those of us who have a truck needs.
As it is, most consumers buy trucks as comfortable transportation rather than commercial utility. The Cybertruck approach to that goal was way out in left field. It turned out to be more of an austere sedan with awful daily-driver attributes (visibility, parking). The expectations regarding truck durability were dashed early on.
  • Like
Reactions: osu1991
dishstaller
As it is, most consumers buy trucks as comfortable transportation rather than commercial utility.
Not around these parts.....we buy trucks and USE them as trucks. I DO, however, know what you mean. Got a friend who is a banker and has owned trucks for years....the paint in the back bed always looks showroom new. You could take one look in the bed of mine and you would instantly say "yep.....this is used as an actual truck".
I had to drop by Lowes last night and parked beside a Ford Lightning. I couldn't help but look in the bed, because that is how I gauge how it's used, and boy was that thing shiny....not a scratch. However, around here I don't see anyone buying an EV truck to actually use as a truck primarily due to range under heavy load.
Jimbo
Not around these parts.....we buy trucks and USE them as trucks. I DO, however, know what you mean. Got a friend who is a banker and has owned trucks for years....the paint in the back bed always looks showroom new. You could take one look in the bed of mine and you would instantly say "yep.....this is used as an actual truck".
I had to drop by Lowes last night and parked beside a Ford Lightning. I couldn't help but look in the bed, because that is how I gauge how it's used, and boy was that thing shiny....not a scratch. However, around here I don't see anyone buying an EV truck to actually use as a truck primarily due to range under heavy load.
I have a Truck, I use it as a Truck as well as Comfortable Transportation ... I don't Need it as a Truck all that often, but when I do, I know its there and its a comfortable as a car that I would otherwise own.

I initially bought the Truck because I can now see Over or Thru most other Vehicles ...
It got so tiring being behind traffic on the expressway and not being able to see at all ... and Every family has to have an SUV ...

Now being in my Truck I can See whats happening with traffic.
dishstaller
I initially bought the Truck because I can now see Over or Thru most other Vehicles ..
Last year I drove my Mom to see a friend in Tallahassee and we took my truck. She was very impressed with how well it rode and, like you, she LOVED being up high and being able to see over other vehicles.

For those of you who use a truck to haul things, especially lumber, you should look into adding a Bed Slide. I can easily carry 12 ft lumber with no issues. And if I'm carry bags of concrete, it makes it very easy to load because you slide it out, load up and then slide it back. The model I went with can handle 1,500 lbs.
  • Like
Reactions: navychop and Jimbo
Jimbo
Last year I drove my Mom to see a friend in Tallahassee and we took my truck. She was very impressed with how well it rode and, like you, she LOVED being up high and being able to see over other vehicles.

For those of you who use a truck to haul things, especially lumber, you should look into adding a Bed Slide. I can easily carry 12 ft lumber with no issues. And if I'm carry bags of concrete, it makes it very easy to load because you slide it out, load up and then slide it back. The model I went with can handle 1,500 lbs.
I'm probably a 70% ride, 30% Truck specific ...
A Slide you you have would be great if I was on the 70% work truck side ... great idea btw.

edit:
I would get more use out of a pair of light weight folding ramps, about 10 ft long, for getting the Snow Blower or Lawn mower into the bed.
dishstaller
great idea btw.
This is the model I bought

bed slide.webp
  • Like
Reactions: navychop and Jimbo
dishstaller
Now I did take off that front bar so I could leave the bed extended when I loaded lumber.
  • Like
Reactions: Jimbo