Social Feed

C
Last reply · posted in DISH Network Support Forum
I just bought a house in the Kansas City area. It faces North, and in my back yard are two beautiful (well, actually they're crippled) 50-year-old maples. In my neighbor's yard, there's a 50-year-old elm. When I bought the house, though, I was ecstatic to find that a Dish antenna had been left on the roof, as well as a 4' VHF/UHF rig.

I brought my DP625 from the old house, plugged it in, and found no signal at all. Wire from the dish was clipped, fixed it, got signal just fine. Went out front to get a better look at the dish, and it was a single LNBF, non-500 pan...sad, but okay. Oddly enough, I still got local channels intermittently on the old pan/LNBF, but it was inconsistent. I wrote that off as a sunburned LNBF, and let it slide.

Had an installer come out for my free move, and he installed a brand new DP+ LNBF with a new pan, but informed me that my maple was directly in the way of the 110 sat, which I shrugged off, 'cause I got all of my subscribed programming off of 119, right? Before he left, I ran through all of the channels; Sirius, Speed, HGTV, and locals 4, 5, 9, and 19 (Fox, ABC, CBS, and PBS), and they all worked fine.

My wife called me in a panic a few hours ago because she couldn't see 19 (kids flip the heck out if they can't watch Zaboomafoo). The 625 told her that it needed a Dish 500 antenna to get that channel. I told her to call Dish, they told her to reset the unit. She did, and called back. They stepped her through diagnostics, and informed her that since we can't spot 110, we were ineligible for local channels. The CSR also offered to unsubscribe us, which my wife accepted. Somehow or another, the 625 was rebooted again, so now it has the updated subscription list, and I can't so much as troubleshoot it, even when I do get home.

What's going on here? Why was I getting locals off of 119? Is it that Dish is unwilling to certify availability on 119? I still have the old pan and LNBF; can I mount that on the East side of my house, which has a clear view to 110 and simply merge that line into the receiver? Or do I have to activate that ugly but expensive 4' mast and lose the ability to record "Prison Break" on my DVR?!?
3 Replies · 1324 views
TNGTony
In order to uplink more local cities and start offering HD locals all over the country, Dish launched a super-uper spot beam satellite to 110. If you do a search on this forum for E*10 you will see a ton of info about it. Also take a look at www.dishchannelchart.com to see where all the channels are in the sky. Also take a look at the "changes archive" to see when the moves happened.

Kansas City right now, all the local channels are on 119 transponder 1 spot beam 9. If you are in the KC area, you should be able to get them. If you live on the very edge of the KC market (http://ekb.dbstalk.com/TVMarkets you may have problems receiving them.

Sew ya
Tony
C
Thanks, Tony, that makes a lot of sense. On the second part of my question, though, how hard is it to put that old pan in a location to spot 110 all by itself and merge the signals between the 500/DP and the old pan/LNBF? I only have the one receiver, and plan on keeping it that way.
papalittle
you can us 2 dishes just get a sw21 switch and connect the 2 dishes. problem solved.
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
I was reading this article


That said this-
Last summer, for the first time, streaming services like Netflix and Amazon Prime claimed the largest share of the television viewing audience, surpassing both cable and broadcast TV. Streaming captured 34.8 percent of July viewers, according to Nielsen data, compared to 34.4 percent for cable and 21.6 percent for broadcast.

And then, sometime in the second half of 2022, cord-cutters became the majority. The share of cable and satellite television subscribers dipped to 48 percent, according to a report from Samba TV, a television technology company.


Now I do not consider those with YTTV and the likes, Cord Cutters, but they still do not have Traditional Cable/Satellite delivered Live TV, so I decided to do the math.

There are, now, 129 Million Households in the United States.

In 2015, there were 100 Million Cable/Sat Subscribers , no streaming Live TV Service.

Today, there are 66 Million Live TV subscribers, including Cable, Satellite and Streaming.

Roughly, Streaming Live TV has 14 Million subs including all of them.

So that means, Cable/Satellite now has, roughly, 51 Million Households

So in just 8 years, lost 49% of their subscribers and by the end of this year, expected sub count to be, roughly, 45 million households.

That means a total loss of 55% since 2015 at the end of 2023.

But out of 129 Million households, 45 million will mean only 35% will get Cable/Satellite Delivered Live TV by the end of 2023.

Imagine what 2024 will be like.
906 Replies · 73026 views
  • Wow
Reactions: MikeD-C05
Bruce
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
Jimbo
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.
  • Like
Reactions: dishstaller and AZ.
Bruce
That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
  • Like
Reactions: Mr Tony
AZ.
AZ.
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
Throughout the playoffs most games were not over the air. They were on FS1 or TrueTV, HBO, TBS....So without a sports package you need FS1, and the others you need a old school TV package. If I had to guess, close to 75% of playoff games were not on free local TV.
  • Like
Reactions: Jimbo
Jimbo
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
Playoffs ...

Technically, they are right, the actual World Series was all on Fox.

They have been talking about shortening the Season ... IF they ever do, they would need to have the Playoffs OVER before the NFL Starts ... which is 1st or 2nd week in September.

Between College and the NFL, the World Series loses viewers because Football is starting .... unless YOUR Team is in it.

I would consider my self the Avg baseball fan ... My teams were Out of it after the 1st round of playoffs, which shouldn't even be a thing, except we can make more MONEY ... lets add another 2 or 3 rounds to the playoffs.

Its a farce that they let half the league in the playoffs, when I grew up, there was real competitiveness in the playoffs, only a few teams made the Playoffs ... you had 4 divisions, winners were in, thats it ... (it was something like that).
Now its a participation sport, if you have a winning record, you can probably get in ...
Foxbat
I would say the drop in World Series viewing numbers was more relevant to the teams playing than some seismic shift away from traditional OTA or Cable to Streaming. In the Midwest and Florida, sure there was interest, but probably not in the rest of the country.

Plus, there were a number of political ads between innings and that may have turned some baseball fans off. But that's Broadcast TV and if not political ads, it would have been gambling or beer ads.
Jimbo
I would say the drop in World Series viewing numbers was more relevant to the teams playing than some seismic shift away from traditional OTA or Cable to Streaming. In the Midwest and Florida, sure there was interest, but probably not in the rest of the country.

Plus, there were a number of political ads between innings and that may have turned some baseball fans off. But that's Broadcast TV and if not political ads, it would have been gambling or beer ads.
To some degree thats true ...
Problem is, in order to have Large numbers, you have to have LA and NY in it most years ????

Milwaukee isn't that far from Chicago, so the WS would have had the #3 population city involved to some extent, even if they were rooting against them
TheForce
Supporting Founder Pub Member / Supporter
Last reply · posted in The Phone & Tablet Zone
Apple Fall Hardware Event takes place today, September 9, 2026, at 10:00 a.m. PT / 1:00 p.m. ET. It marks the debut of new CEO John Ternus and the expected reveal of Apple's first foldable phone.
143 Replies · 2649 views
Foxbat
Well, Munro and Associates are now a go-to for mobile device teardowns! Who knew? They have an idea what may be causing the iPhone Duo's inside folding screen to fail 40% up from the bottom:
​
  • Like
Reactions: slow_poke_pete
S
samsung made the screen apple designed the hinge for the duo. this has got to be the best advertising campaign for samsung :biggrin :clapping :oops:
TheForce
Report on my iphone 18 PM
Working well with about 3-4 days battery life. New BT and Wifi range is much better than the 15 I had. It doesn't seem any faster but probably is. The Camera shooting video has amazing image stabilization.
Only observed issue is once in awhile, the screen loses touch sensitivity and requires a soft reboot and delete the many open apps to fix. This happens about once a week since buying it.
Foxbat
Only observed issue is once in awhile, the screen loses touch sensitivity and requires a soft reboot and delete the many open apps to fix.
I think your new 18 Pro is fine as this seems to be an iOS 27 bug. My iPhone 17 has similar issues.
G
Last reply · posted in DISH Network Support Forum
After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
4 Replies · 294 views
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
  • Like
Reactions: charlesrshell
jsmit86
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Almighty1
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
  • Like
Reactions: charlesrshell
jsmit86
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
I think it is, but I am not aware of specific differences.
My original communication of the issue was very detailed, and they had the team work on it and felt they knew what was causing the issue.
The rollback to 708 confirmed that 708 did not have that problem.
I got an email in late October asking if I would be open to checking if a beta version had the problem. I agreed to the test, and it did not have the dolby problem.
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
Comcast is the first to report, with a massive 274,000 loss in video subscribers.

In the 3Q of 2016, Comcast had 21.42 million video subscribers and was the #1 provider, now at 10.39 million and is the #3 Provider, YTTV is #2 ( who also surpassed DirecTV-8 Million and Dish-under 5 Million), Charter/Spectrum is #1.

30 Replies · 1178 views
  • Like
Reactions: Howard Simmons
Foxbat
Meanwhile, my neighbor 300' away has gigabit fiber, and I'm stuck with copper solutions.
S
Meanwhile, my neighbor 300' away has gigabit fiber, and I'm stuck with copper solutions.
similar situation. almost every neighborhood around me has fiber, but our 3 block area. I called AT&T and was like, how hard is it to bring fiber over about 200 feet (I am closest to the folks with fiber and can see it on the poles from my front door); crickets and very frustrating.
  • Like
Reactions: Foxbat
Jimbo
similar situation. almost every neighborhood around me has fiber, but our 3 block area. I called AT&T and was like, how hard is it to bring fiber over about 200 feet (I am closest to the folks with fiber and can see it on the poles from my front door); crickets and very frustrating.
Chances are, they told you about how hard and long it would take for them to place that fiber to your area ... Poles needed to be placed and what not ...
ncted
Chances are, they told you about how hard and long it would take for them to place that fiber to your area ... Poles needed to be placed and what not ...
Or the people who own the poles closest to the house won't let AT&T attach.
dishstaller
similar situation. almost every neighborhood around me has fiber, but our 3 block area. I called AT&T and was like, how hard is it to bring fiber over about 200 feet (I am closest to the folks with fiber and can see it on the poles from my front door); crickets and very frustrating.
If you know the folks who have fiber, strike a deal with them and pay for a Wavlink AX3000. I've installed these for customers and they will light up abut 10 acres. One customer is linking her security camera to it and the cam is about 1,000 ft from the radio. These are also usable as repeaters so you could install one at your house for that purpose. Heck, offer to pay 75% of their monthly bill if that's what it takes.
Jimbo
Or the people who own the poles closest to the house won't let AT&T attach.
People that Own the poles ?
That would be ATT Or the Power Company depending on the situation ... easily figured out by looking at the Tag on All Poles.
navychop
Or the people who own the poles closest to the house won't let AT&T attach.

Might not be an option, due to easements. I can't see governments allowing public property (easements) for exclusive use by just one company.

I $uppo$e there'$ a way….
ncted
People that Own the poles ?
That would be ATT Or the Power Company depending on the situation ... easily figured out by looking at the Tag on All Poles.
Sorry, Companies or whoever. Power company, cable company, competing phone companies, governments. AT&T sued Nashville a while back because of how pole attachment works there.
Jimbo
Sorry, Companies or whoever. Power company, cable company, competing phone companies, governments. AT&T sued Nashville a while back because of how pole attachment works there.
Really ?
The poles always have a tag on them showing who owns them, up here its either the Power Company or the Phone company ...

edit:
Utility and telephone poles in Nashville, Tennessee are owned primarily by two entities: [1]
  • Nashville Electric Service (NES): Owns approximately 80% of the utility and telephone poles across its Davidson County service area.
    • AT&T: Owns the remaining 20% of the poles (roughly 104,000 poles). [1, 2, 3]
Other telecom and cable providers, such as Comcast or Google Fiber, do not typically own the physical poles; instead, they rent attachment space on NES- or AT&T-owned poles through pole-attachment agreements. [1, 2]
  • Like
Reactions: Foxbat
KAB
KAB
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Wireless Joey 4. Yesterday, I noticed a little green dot on a small black field in the upper right hand corner of the screen, regardless of channel, recordings, etc. A restart got rid of it, but I am curious as to what It meant and what I did to get it there.
2 Replies · 41 views
Redneck_Randy
Google Search

The little green dot inside a small black field in the upper right-hand corner of your screen is an Android privacy indicator confirming that the voice remote's microphone is actively listening. Because the Joey 4 runs on an Android
  • Like
Reactions: charlesrshell
B
That's no good
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
191 Replies · 3660 views
  • Haha
Reactions: Mike0616
Ronnie-
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
Jimbo
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Ronnie-
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Jimbo
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Of course ... but they Could.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
Ronnie-
Of course ... but they Could.
Yes. I even said so. But for reasons I gave, they won't. Wouldn't make sense for them too and they would lose money. A lot of these people that watch one of these games, watch more than one.

They want those eyeballs on as many games as possible. It just makes financial sense.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
It was early. Sure.
TFLEV
· posted in TFLEV
0 Replies · 12 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68786 Replies · 2688520 views
  • Like
Reactions: c-spand
long_time_Dish
My Maria - Brooks & Dunn
long_time_Dish
Don't Lose My Number - Phil Collins
H
Rikki DON'T LOSE That NUMBER-Steely Dan
  • Like
Reactions: ClarkGable
ClarkGable
Longer - Dan Fogelberg
G
Lifetime Supporter
Last reply · posted in Computers and Gadgets
I have a DX100 American Electrola Radio, AM FM SW. It is a receiver only, which quit working many years ago. Several years ago the seller had stated that capacitors would need replaced because they go bad.

In this particular xxx://www.youtube.com/watch?v=3zUbXgNT8Oo they mentioned the backup battery being the problem.

Several years back when asking about having the capacitors replaced one former repairman said send it back to the factory, well there is not any. Another response several years ago from a person who repaired circuit boards for industry said they could repair it if they had a schematic, again I do not have.

This radio was built in Pittsburgh, PA out of as many American parts as they could find. Your thoughts on getting the radio to work?
24 Replies · 8291 views
D
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.
  • Like
Reactions: Gray Hair
G
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.

Deheza,

Thanks for your information and offer. My Radio is actually a DXC 100 as well, was a typo in the title. Am puzzled by yours not having the battery, since they only made two runs. While the schematics would be great, I believe by the amount of views it would be better to post all the information here.

I see where numerous people have posted pdf files, just not sure how they do it.

Sorry about the long response time, just was not sure how to handle it.

Thanks,

Respectively,

Gray Hair
. Raine
If you change that diode, make sure you know what type it is, a regular rectifier, zener, whatever, don't just throw any old diode in. Try to read the number on it and look it up. Do you have a multimeter? A lot of the things in there can be easily checked with a meter.

Trying to run it off a clean 12 V source like a battery would be a good idea, like someone else suggested. In a couple of your pictures there's a 9v regulator [7809CT], and I think I saw a 5 V regulator [7805]. The 5v probably supplies the display and the 9v the radio circuitry. If you have a meter that would be a first place to check, check the three pins on each for a 12v input, a gnd, a 5v output on the 5v and a 9v output on the 9v. Bad solder connections is another good possibility.

That radio looks to be in nice shape inside. It doesn't look like anyone's worked it over, looks nice.

The back-up battery is probably just for a memory function, when you replace it make sure you use the same type, cadmium, lithium-ion, whatever it is, it should say on it what type it is and the voltage, or have a part# that can be looked up.
  • Like
Reactions: Gray Hair
O
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Revenerd
Another necropost here. I picked one of these up today. Does anyone out there have this manual (I'd take schematics too). I too found azenithnut's post with the missing pages 16 and 17.
(((Garyd)))
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Can you send the serial-number label and photos of the tuner board, that should help distinguish its circuit revision; collector records say serials marked OB were the second production run. Use a heat gun or hair dryer to find bad caps if it works for A FEW SECONDS ITS A BAD CAP, THAN ONLY HEAT HALF OF THE RADIO