Social Feed

D
Last reply · posted in DISH Network Support Forum
Hello All. I am looking to possibly switch from DirecTV to Dish to save a few bucks a month. But, I have a couple of questions on my potential setup that I am hoping someone can help me with.

Today I have 3 receivers with DirecTV. I am looking to go down to 2 separate signals in the future. What I want to do is have one output of the 2 tuner receivers mirrored to 2 separate TVs in my home. I have a TV in my living room (main TV) and then one in my family room and one in the bedroom. The family room and bedroom are basically never on at the same time so I am thinking mirroring them would be fine. Here are my questions:

1. If I get the 625 DVR and decide I do not like the DVR features, can I turn that subscription/feature off to remove the $6/month fee?

2. Can I get a second UHF remote to put in the bedroom so I can remote control (from a distance) the TV in the family room AND from the bedroom (since they'll both be separated from the receiver by walls and so on)? Will I have to pay for that extra remote or can I request that when I sign up?

3. When I spoke to a local firm they said the installer will likely charge me $30-40 to mirror the one output signal to 2 rooms. I'm pretty good with wiring and so on, so can I set this up in advance? With the wires already in place from the DirecTV install, I may already have what I need, but I am not sure how to 'split' the output signal from the tuner or if it requires any special gear.

As you can see, my main issues are around costs since that's my main motivation in switching to Dish from DirecTV so I want to be sure I am not setting myself up to spend equal or more money when making the move :)

I think that is all I have for now. Thanks so much for taking the time to read and respond. It's appreciated.
9 Replies · 1828 views
boba
Of course you can reduce your Directv system to 2 raceivers saving you $5/Mo. and you can split the ch 3/4 output of your existing receiver to the two rooms. That way you won't have to learn new channel numbers. Be very careful to investigate DISH user fees with second tuner fees and DVR fees you could end up spending as much per month.
miguelaqui
boba said:
Of course you can reduce your Directv system to 2 raceivers saving you $5/Mo. and you can split the ch 3/4 output of your existing receiver to the two rooms. That way you won't have to learn new channel numbers. Be very careful to investigate DISH user fees with second tuner fees and DVR fees you could end up spending as much per month.

Do your DirecTV receivers have UHF remotes? If not, then you would not be able to control the DTV receiver from another room, unless you bought a remote extender.

As far as second tuner fees, you will only receive that if you do not have the receiver connected to a phone line.
D
As it turned out my decision was made for me when the Dish installer said he could not find an open line of sight to hook me up. What was bad is that my wife had called earlier in the day to cancel our DTV service :eek:

So, I called DTV and told them I may be leaving but would consider staying based on what they had to offer (they had offered my wife some 'stuff' earlier but she did not remember what). In the end, I was able to get a free DVR, I dropped my plan to plain total choice and got a $5/month rebate on my bill for 12 months to offset the DVR fee. I will say it is frustrating when you are on the phone with them and they first offer the DVR for $100 and then $50 and then for nothing. Makes you wonder what you can get if you just keep haggling. Would be nice if they just said, we'll give you this, take it or leave it.

One of my receivers is UHF compatible (need to find the remote though) and I am planning on using that to do the split between the 2 rooms to eliminate one of the 2 extra receivers. The drop of the plan plus the rebate plus dropping a receiver will bring down my costs a bit, so it is not all bad. Just a bit disappointed that my options are limited, but perhaps Verizon FIOS TV will be around the corner and give me another option. If nothing else maybe it drives down costs of everyone. :)

Thanks for all of your feedback.
BrianB
That's surprising because it's amost exactly the same LOS for Dish and for DirecTV. Glad you ended up getting a good deal though.
boba
BrianB said:
That's surprising because it's amost exactly the same LOS for Dish and for DirecTV. Glad you ended up getting a good deal though.
DISH's main satellite 119 is 18 degrees west of Directv's 101 so it can be quite a difference depending on where you are located. Good luck with the reconfiguration of your system. Come back and ask questions as needed.:)
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
Comcast is the first to report, with a massive 274,000 loss in video subscribers.

In the 3Q of 2016, Comcast had 21.42 million video subscribers and was the #1 provider, now at 10.39 million and is the #3 Provider, YTTV is #2 ( who also surpassed DirecTV-8 Million and Dish-under 5 Million), Charter/Spectrum is #1.

30 Replies · 1161 views
  • Like
Reactions: Howard Simmons
Foxbat
Meanwhile, my neighbor 300' away has gigabit fiber, and I'm stuck with copper solutions.
S
Meanwhile, my neighbor 300' away has gigabit fiber, and I'm stuck with copper solutions.
similar situation. almost every neighborhood around me has fiber, but our 3 block area. I called AT&T and was like, how hard is it to bring fiber over about 200 feet (I am closest to the folks with fiber and can see it on the poles from my front door); crickets and very frustrating.
  • Like
Reactions: Foxbat
Jimbo
similar situation. almost every neighborhood around me has fiber, but our 3 block area. I called AT&T and was like, how hard is it to bring fiber over about 200 feet (I am closest to the folks with fiber and can see it on the poles from my front door); crickets and very frustrating.
Chances are, they told you about how hard and long it would take for them to place that fiber to your area ... Poles needed to be placed and what not ...
ncted
Chances are, they told you about how hard and long it would take for them to place that fiber to your area ... Poles needed to be placed and what not ...
Or the people who own the poles closest to the house won't let AT&T attach.
dishstaller
similar situation. almost every neighborhood around me has fiber, but our 3 block area. I called AT&T and was like, how hard is it to bring fiber over about 200 feet (I am closest to the folks with fiber and can see it on the poles from my front door); crickets and very frustrating.
If you know the folks who have fiber, strike a deal with them and pay for a Wavlink AX3000. I've installed these for customers and they will light up abut 10 acres. One customer is linking her security camera to it and the cam is about 1,000 ft from the radio. These are also usable as repeaters so you could install one at your house for that purpose. Heck, offer to pay 75% of their monthly bill if that's what it takes.
Jimbo
Or the people who own the poles closest to the house won't let AT&T attach.
People that Own the poles ?
That would be ATT Or the Power Company depending on the situation ... easily figured out by looking at the Tag on All Poles.
navychop
Or the people who own the poles closest to the house won't let AT&T attach.

Might not be an option, due to easements. I can't see governments allowing public property (easements) for exclusive use by just one company.

I $uppo$e there'$ a way….
ncted
People that Own the poles ?
That would be ATT Or the Power Company depending on the situation ... easily figured out by looking at the Tag on All Poles.
Sorry, Companies or whoever. Power company, cable company, competing phone companies, governments. AT&T sued Nashville a while back because of how pole attachment works there.
Jimbo
Sorry, Companies or whoever. Power company, cable company, competing phone companies, governments. AT&T sued Nashville a while back because of how pole attachment works there.
Really ?
The poles always have a tag on them showing who owns them, up here its either the Power Company or the Phone company ...

edit:
Utility and telephone poles in Nashville, Tennessee are owned primarily by two entities: [1]
  • Nashville Electric Service (NES): Owns approximately 80% of the utility and telephone poles across its Davidson County service area.
    • AT&T: Owns the remaining 20% of the poles (roughly 104,000 poles). [1, 2, 3]
Other telecom and cable providers, such as Comcast or Google Fiber, do not typically own the physical poles; instead, they rent attachment space on NES- or AT&T-owned poles through pole-attachment agreements. [1, 2]
KAB
KAB
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Wireless Joey 4. Yesterday, I noticed a little green dot on a small black field in the upper right hand corner of the screen, regardless of channel, recordings, etc. A restart got rid of it, but I am curious as to what It meant and what I did to get it there.
2 Replies · 36 views
Redneck_Randy
Google Search

The little green dot inside a small black field in the upper right-hand corner of your screen is an Android privacy indicator confirming that the voice remote's microphone is actively listening. Because the Joey 4 runs on an Android
  • Like
Reactions: charlesrshell
B
That's no good
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
191 Replies · 3653 views
  • Haha
Reactions: Mike0616
Ronnie-
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
Jimbo
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Ronnie-
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Jimbo
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Of course ... but they Could.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
Ronnie-
Of course ... but they Could.
Yes. I even said so. But for reasons I gave, they won't. Wouldn't make sense for them too and they would lose money. A lot of these people that watch one of these games, watch more than one.

They want those eyeballs on as many games as possible. It just makes financial sense.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
It was early. Sure.
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
I was reading this article


That said this-
Last summer, for the first time, streaming services like Netflix and Amazon Prime claimed the largest share of the television viewing audience, surpassing both cable and broadcast TV. Streaming captured 34.8 percent of July viewers, according to Nielsen data, compared to 34.4 percent for cable and 21.6 percent for broadcast.

And then, sometime in the second half of 2022, cord-cutters became the majority. The share of cable and satellite television subscribers dipped to 48 percent, according to a report from Samba TV, a television technology company.


Now I do not consider those with YTTV and the likes, Cord Cutters, but they still do not have Traditional Cable/Satellite delivered Live TV, so I decided to do the math.

There are, now, 129 Million Households in the United States.

In 2015, there were 100 Million Cable/Sat Subscribers , no streaming Live TV Service.

Today, there are 66 Million Live TV subscribers, including Cable, Satellite and Streaming.

Roughly, Streaming Live TV has 14 Million subs including all of them.

So that means, Cable/Satellite now has, roughly, 51 Million Households

So in just 8 years, lost 49% of their subscribers and by the end of this year, expected sub count to be, roughly, 45 million households.

That means a total loss of 55% since 2015 at the end of 2023.

But out of 129 Million households, 45 million will mean only 35% will get Cable/Satellite Delivered Live TV by the end of 2023.

Imagine what 2024 will be like.
904 Replies · 73013 views
  • Wow
Reactions: MikeD-C05
Bruce
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
Jimbo
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.
  • Like
Reactions: dishstaller and AZ.
Bruce
That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
  • Like
Reactions: Mr Tony
AZ.
AZ.
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
Throughout the playoffs most games were not over the air. They were on FS1 or TrueTV, HBO, TBS....So without a sports package you need FS1, and the others you need a old school TV package. If I had to guess, close to 75% of playoff games were not on free local TV.
  • Like
Reactions: Jimbo
Jimbo
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
Playoffs ...

Technically, they are right, the actual World Series was all on Fox.

They have been talking about shortening the Season ... IF they ever do, they would need to have the Playoffs OVER before the NFL Starts ... which is 1st or 2nd week in September.

Between College and the NFL, the World Series loses viewers because Football is starting .... unless YOUR Team is in it.

I would consider my self the Avg baseball fan ... My teams were Out of it after the 1st round of playoffs, which shouldn't even be a thing, except we can make more MONEY ... lets add another 2 or 3 rounds to the playoffs.

Its a farce that they let half the league in the playoffs, when I grew up, there was real competitiveness in the playoffs, only a few teams made the Playoffs ... you had 4 divisions, winners were in, thats it ... (it was something like that).
Now its a participation sport, if you have a winning record, you can probably get in ...
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68786 Replies · 2688507 views
  • Like
Reactions: c-spand
long_time_Dish
My Maria - Brooks & Dunn
long_time_Dish
Don't Lose My Number - Phil Collins
H
Rikki DON'T LOSE That NUMBER-Steely Dan
  • Like
Reactions: ClarkGable
ClarkGable
Longer - Dan Fogelberg
G
Lifetime Supporter
Last reply · posted in Computers and Gadgets
I have a DX100 American Electrola Radio, AM FM SW. It is a receiver only, which quit working many years ago. Several years ago the seller had stated that capacitors would need replaced because they go bad.

In this particular xxx://www.youtube.com/watch?v=3zUbXgNT8Oo they mentioned the backup battery being the problem.

Several years back when asking about having the capacitors replaced one former repairman said send it back to the factory, well there is not any. Another response several years ago from a person who repaired circuit boards for industry said they could repair it if they had a schematic, again I do not have.

This radio was built in Pittsburgh, PA out of as many American parts as they could find. Your thoughts on getting the radio to work?
24 Replies · 8290 views
D
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.
  • Like
Reactions: Gray Hair
G
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.

Deheza,

Thanks for your information and offer. My Radio is actually a DXC 100 as well, was a typo in the title. Am puzzled by yours not having the battery, since they only made two runs. While the schematics would be great, I believe by the amount of views it would be better to post all the information here.

I see where numerous people have posted pdf files, just not sure how they do it.

Sorry about the long response time, just was not sure how to handle it.

Thanks,

Respectively,

Gray Hair
. Raine
If you change that diode, make sure you know what type it is, a regular rectifier, zener, whatever, don't just throw any old diode in. Try to read the number on it and look it up. Do you have a multimeter? A lot of the things in there can be easily checked with a meter.

Trying to run it off a clean 12 V source like a battery would be a good idea, like someone else suggested. In a couple of your pictures there's a 9v regulator [7809CT], and I think I saw a 5 V regulator [7805]. The 5v probably supplies the display and the 9v the radio circuitry. If you have a meter that would be a first place to check, check the three pins on each for a 12v input, a gnd, a 5v output on the 5v and a 9v output on the 9v. Bad solder connections is another good possibility.

That radio looks to be in nice shape inside. It doesn't look like anyone's worked it over, looks nice.

The back-up battery is probably just for a memory function, when you replace it make sure you use the same type, cadmium, lithium-ion, whatever it is, it should say on it what type it is and the voltage, or have a part# that can be looked up.
  • Like
Reactions: Gray Hair
O
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Revenerd
Another necropost here. I picked one of these up today. Does anyone out there have this manual (I'd take schematics too). I too found azenithnut's post with the missing pages 16 and 17.
(((Garyd)))
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Can you send the serial-number label and photos of the tuner board, that should help distinguish its circuit revision; collector records say serials marked OB were the second production run. Use a heat gun or hair dryer to find bad caps if it works for A FEW SECONDS ITS A BAD CAP, THAN ONLY HEAT HALF OF THE RADIO
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 50 views
G
Last reply · posted in DISH Network Support Forum
After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
3 Replies · 291 views
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
  • Like
Reactions: charlesrshell
jsmit86
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Almighty1
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
  • Like
Reactions: charlesrshell