Social Feed

Main Feed My Feed
I
intrust16
Last reply · posted in Free To Air (FTA) Discussion

True south in Sherbrooke, Quebec

Have U guys had a good summer?

... wanted to reply to my old "true south in Quebec" thread but can't do it now...

Invacom QPH-031, SG2100 Motor, Winegard 76cm dish. Gecen 22khz switch. Pansat 3500sd

I was really busy and my antenna is still on the roof.

Now looking at my true south, my coordinates 45,24 and 71,54 have not been useful since I tried labgate's method of aiming to 91 then using usals to find my true south. It does switch from places and moves smoothly but no signal. Level is at 69 but no quality coming in.

1) at 45,24 what should be my elevation for those coordinates on dish and motor?

2) I have 2.573 S/R on pansat 3500SD is that OK?

set AMC 6 by editing TP to STD wich should it be 10750 or 11250 since I use the switch on the two inputs. Diseqc Off, 22khz Off, Skew 0, TP 12144 Pol V, symbol rate 2.573.

Thanks for your help

intrust16
Read more
3 Replies · 1901 views
Load Replies (3) Reply Legacy View
M
mrweather
You're at 71.5 degrees west longitude so your true south would be AMC6 at 72 west. So far you've got that down.

What you need to do is input your lat/long coordinates in the USALS menu of your receiver, along with AMC6 at 72 west. Wait for the motor to stop moving then manually adjust the dish azimuth by turning the whole motor+dish.

12146 V is a good TP. Strong signal at my location.

I'm not familiar with the SG2100 motor but I think the elevation is just 90 minus whatever your latitude is. Once you've determine it don't adjust it anymore. The only elevation adjustment you'll have to do is at the dish itself for fine tuning.

Of course, this all assumes your mounting pole/mast is perfectly plumb! :)
Read more
Reply
Tron
Tron
SG-2100 motors have a 'latitude' scale on the left side of the bracket (looking from behind the dish), simply set the little arrow on the motor to your latitude and lock it down. After that, any tweaking of elevation should be done on the dish only.
Read more
Reply
Labgate
Labgate
Hello Intrust

You enter your coordinates in the usual configuration.

Then you use the circular side of the lnb and you configure nimiq1 to use usals. Insure you are on a valid tp and that you configure the lnb to use 11250.

You then play with the dish to get the signal. If you are lucky there will be another bev dish that will show you approxmatively where to point at.

I've used this method many times and it works. I live in Quebec also and since our true south satellite is 72, we are not lucky. But with a powerful sat like nimiq91 it can help.

Make sure your dish and motor have the right elevation.
For you, you set elevation on the motor of 45 degrees (there is a scale on it) and for the elevation of the dish it should be (30 - 6.92), so 23.08 on the dish.

So :

make sure your post is perfectly plumb
you adjust 45 on the motor
23.08 on the dish
in the receiver you go to nimiq1 Or nimiq 91
You select usals for nimiq1
input usals coordinates in receiver (45,24 and 71,54 )
You select the lnb type at 11250.
Connect cable to the circular side of the lnb.
select a valid tp (not all tp works) like 12224 or 12239
in the usals menu goto nimiq1
make little adjustments. (mainly on dish not motor).

This should work.

Good luck

Labgate

intrust16 said:
Have U guys had a good summer?

... wanted to reply to my old "true south in Quebec" thread but can't do it now...

Invacom QPH-031, SG2100 Motor, Winegard 76cm dish. Gecen 22khz switch. Pansat 3500sd

I was really busy and my antenna is still on the roof.

Now looking at my true south, my coordinates 45,24 and 71,54 have not been useful since I tried labgate's method of aiming to 91 then using usals to find my true south. It does switch from places and moves smoothly but no signal. Level is at 69 but no quality coming in.

1) at 45,24 what should be my elevation for those coordinates on dish and motor?

2) I have 2.573 S/R on pansat 3500SD is that OK?

set AMC 6 by editing TP to STD wich should it be 10750 or 11250 since I use the switch on the two inputs. Diseqc Off, 22khz Off, Skew 0, TP 12144 Pol V, symbol rate 2.573.

Thanks for your help

intrust16
Click to expand...
Read more
Reply
T
techristian
Last reply · posted in Free To Air (FTA) Discussion

NEED SUGGESTIONS FOR NEW FTA BOX

IS Amiko MIRA 3 any good ???
Can you recommend the best to cover all bases. NO BEEPS on certain channels 101w (NEWSMAX ,NEWS NATION), a clock that keeps working STEADY for timed recording ,solid unit with good lifespan. My Amiko died AND my Linkbox has NO Favorites Button and BEEPS on many channels. Picking up 105 west with a NEW SHED IN THE Way with 6 foot Cband ..95 percent quality ...unbelievable.
Read more
shedish.webp
4 Replies · 75 views
Load Replies (4) Reply Legacy View
primestar31
primestar31
techristian said:
IS Amiko MIRA 3 any good ???
Can you recommend the best to cover all bases. NO BEEPS on certain channels 101w (NEWSMAX ,NEWS NATION), a clock that keeps working STEADY for timed recording ,solid unit with good lifespan. My Amiko died AND my Linkbox has NO Favorites Button and BEEPS on many channels. Picking up 105 west with a NEW SHED IN THE Way with 6 foot Cband ..95 percent quality ...unbelievable.
Click to expand...
Have you tried a new power brick on your Amiko? It's slim pickings out there anymore. The FTA market in the US has pretty much been abandoned.

This would likely be your best bet, and Rick is a good seller. I've never had any issues with him:

Read more
Reply
  • Like
Reactions: SDA_FL_USA and FTA4PA
T
techristian
primestar31 said:
Have you tried a new power brick on your Amiko? It's slim pickings out there anymore. The FTA market in the US has pretty much been abandoned.

This would likely be your best bet, and Rick is a good seller. I've never had any issues with him:

Click to expand...
Thanks
Read more
Reply
T
techristian
Have you tried a new power brick on your Amiko?

YOU WERE RIGHT. IT IS WORKING NOW WITH 2X AMPS !!

DAN
Read more
Reply
  • Like
Reactions: cyberham and SDA_FL_USA
cyberham
cyberham
techristian said:
...YOU WERE RIGHT. IT IS WORKING NOW WITH 2X AMPS !!
Click to expand...
Give us a summary of what you receive with a 6-footer. I'm very curious.
Read more
Reply
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club

You can't even trust the cost per ounce info in grocery stores anymore

I'm surprised Walmart hasn't banned this guy from all of their stores. He has been on their CASE the past few months.


View: https://www.youtube.com/shorts/f3zr37ekgKM?feature=share
Read more
76 Replies · 732 views
Load Replies (76) Reply Legacy View
  • Wow
Reactions: NYDutch
Juan
Juan
dishstaller said:
Then they are stupid. Everyone knows that the price per ounce should be the price per ounce of actual product.
Click to expand...
You are paying for the whole thing
Read more
Reply
T
telstar_1
Juan said:
You are paying for the whole thing
Click to expand...
Well, the bag can't weigh that much, right? But by law food product packaging must display the actual net weight of the product, i.e., the contents of the container, so by any logic, if not law, a store's stated per-ounce cost should reflect that figure. But since there's not any law regulating shelf statements, a store can say whatever it wants without violating any rules. So I guess the answer is more consumer legislation. Or simply caveat emptor.
Read more
Reply
  • Like
Reactions: (((Garyd)))
Jimbo
Jimbo
telstar_1 said:
Well, the bag can't weigh that much, right? But by law food product packaging must display the actual net weight of the product, i.e., the contents of the container, so by any logic, if not law, a store's stated per-ounce cost should reflect that figure. But since there's not any law regulating shelf statements, a store can say whatever it wants without violating any rules. So I guess the answer is more consumer legislation. Or simply caveat emptor.
Click to expand...
I would think that the Vendor/Maker of the product would have a say in it, showing the Correct weight ...
You would think it would be in the contract.

I do look at the ounces of items, but unless its way off, I don't check the math, may have to start now.

Remember when you use to get a 13.5 oz bag of Chips .... Thats a PARTY Size now.
Read more
Reply
  • Like
Reactions: AZ.
TRG
TRG
Jimbo said:
I would think that the Vendor/Maker of the product would have a say in it, showing the Correct weight ...
You would think it would be in the contract.

I do look at the ounces of items, but unless its way off, I don't check the math, may have to start now.

Remember when you use to get a 13.5 oz bag of Chips .... Thats a PARTY Size now.
Click to expand...
I remember when a pound of coffee was 16oz. Now its 12oz, they don't call it a pound anymore and its three times the cost of the 16oz pound.
Read more
Reply
  • Like
  • Sad
Reactions: (((Garyd))), dishstaller, slow_poke_pete and 1 other person
Jimbo
Jimbo
TRG said:
I remember when a pound of coffee was 16oz. Now its 12oz, they don't call it a pound anymore and its three times the cost of the 16oz pound.
Click to expand...
Well, they don't call it a pound anymore ....

Ice cream is that way too, use to be a half gallon, now its 1.5 quart or some say 48 oz
Read more
Reply
  • Sad
Reactions: Bobby
meStevo
meStevo
The larger discrepancies are likely from a data or sync issue. Digital tags don't cause the error, but they can spread one bad entry across a whole store or region instantly. The small cent differences are probably just rounding in the weight, the price data, or both.
Read more
Reply
  • Like
Reactions: Juan
(((Garyd)))
(((Garyd)))
Jimbo said:
Well, they don't call it a pound anymore ....

Ice cream is that way too, use to be a half gallon, now its 1.5 quart or some say 48 oz
Click to expand...
Is it real Ice-cream?
Read more
Reply
Jimbo
Jimbo
(((Garyd))) said:
Is it real Ice-cream?
Click to expand...
Is it Real Ice cream ???
Depends on what your talking about.
Read more
Reply
(((Garyd)))
(((Garyd)))
Jimbo said:
Is it Real Ice cream ???
Depends on what your talking about.
Click to expand...
Most don't have any milk in them
Read more
Reply
dishstaller
dishstaller
meStevo said:
The larger discrepancies are likely from a data or sync issue. Digital tags don't cause the error, but they can spread one bad entry across a whole store or region instantly. The small cent differences are probably just rounding in the weight, the price data, or both.
Click to expand...
It's simple math. You take the price and divide by the number of ounces and come up with the price per ounce. I find it hard to believe that Walmart's computers can't carry out simple division.
Read more
Reply
  • Sad
Reactions: Jimbo
meStevo
meStevo
dishstaller said:
It's simple math. You take the price and divide by the number of ounces and come up with the price per ounce. I find it hard to believe that Walmart's computers can't carry out simple division.
Click to expand...
The division isn't the problem, the inputs are. On the Starbucks pods, $9.22 @ $3.35/oz works out to 2.75 oz, but the box is 1.94 oz. So either the system has the wrong weight on file, or the unit price is left over from an older price of about $6.50 that never got updated. Garbage in, garbage out. Walmart's had unit-pricing data problems before, too - in 2024 they paid $1.64M to settle with New Jersey after inspectors found 2,000+ instances of unit prices using the wrong unit of measure.
Read more
Reply
  • Like
Reactions: Yespage
dishstaller
dishstaller
meStevo said:
Garbage in, garbage out.
Click to expand...
THAT is most likely the culprit.
meStevo said:
in 2024 they paid $1.64M to settle with New Jersey after inspectors found 2,000+ instances of unit prices using the wrong unit of measure.
Click to expand...
So....its intentional. The new fine needs to be a billion $...that would cause someone to fix the issue.
Read more
Reply
Y
Yespage
(((Garyd))) said:
Most don't have any milk in them
Click to expand...
*nit pick* You want cream or more precisely FAT to make ice cream. Milk isn't heavy enough. When making my own, I use half and half.
Read more
Reply
  • Like
Reactions: NYDutch
Y
Yespage
meStevo said:
The division isn't the problem, the inputs are. On the Starbucks pods, $9.22 @ $3.35/oz works out to 2.75 oz, but the box is 1.94 oz. So either the system has the wrong weight on file, or the unit price is left over from an older price of about $6.50 that never got updated. Garbage in, garbage out. Walmart's had unit-pricing data problems before, too - in 2024 they paid $1.64M to settle with New Jersey after inspectors found 2,000+ instances of unit prices using the wrong unit of measure.
Click to expand...
Wrong unit of measure? Having a hard time believing that or were they conflating solid and fluid ounces (stupid US measuring system).

The first two coffees aren't off on the same amount, so likely the unit price is linked to some previous price. Now I have to *bleeping* double check more math? Does anyone check anything anymore? Bad enough in the professional world having to QA/QC a third party's work. Don't want to have to do that in the grocery store now too! Not with the absurd measures that are used in the US. Is that unit price for blueberries in ounces or pints...

First world problems, but man... argh!!!
Read more
Reply
TRG
TRG
Yespage said:
Wrong unit of measure? Having a hard time believing that or were they conflating solid and fluid ounces (stupid US measuring system).

Not with the absurd measures that are used in the US. Is that unit price for blueberries in ounces or pints...
Click to expand...

You always have the option of moving to a country that uses a unit of measurement that better suits your needs.
Read more
Reply
View all replies (76)
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
· posted in The Chit Chat Club

Might want to watch this before you buy a new vehicle battery

Love this guy's channel. Looks like Walmart has thrown in the towel when it comes to conventional car batteries.

I bought a new AGM battery from Walmart about a year ago, it is already needing replacing. I thought about just buying a regular battery but from what I've read, that might not be a smart move. Might check my Forscan program and see if I can change the battery type from AGM.


View: https://www.youtube.com/watch?v=awe7kY5nvdU
Read more
0 Replies · 7 views
Replies Reply Legacy View
Scott Greczkowski
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
Read more
68597 Replies · 2677348 views
Load Replies (68597) Reply Legacy View
  • Like
Reactions: c-spand
gms49ers
gms49ers
Just Get Through This Night - Styx
Read more
Reply
  • Like
Reactions: long_time_Dish
long_time_Dish
long_time_Dish
Help Me Make It Through The Night - Sammi Smith
Read more
Reply
  • Like
Reactions: RaiderPower and dishstaller
gms49ers
gms49ers
Make Me Smile/Now More Than Ever - Chicago
Read more
Reply
  • Like
Reactions: dishstaller and RaiderPower
long_time_Dish
long_time_Dish
Sara Smile - Hall and Oates
Read more
Reply
  • Like
Reactions: dishstaller and RaiderPower
dishstaller
dishstaller
When I See You Smile - Bad English
Read more
Reply
View all replies (68597)
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club

Man falls to his death on roller coaster at 6 Flags in GA

Can't help but wonder if a worker overlooked checking the harness. I rarely ride a roller coaster anymore but when I do I check the harness myself pretty aggressively.
Can't imagine what the son is going through.

www.dailymail.com

Dad levitated and bled then fell to his death from coaster

Eyewitnesses have shared fresh details of the horrific accident that happened at Six Flags Over Georgia on Monday afternoon.
www.dailymail.com www.dailymail.com
Read more
27 Replies · 379 views
Load Replies (27) Reply Legacy View
Jimbo
Jimbo
bgtsafari.com

Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?

Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…
bgtsafari.com bgtsafari.com
Read more
Reply
dishstaller
dishstaller
Jimbo said:
bgtsafari.com

Could B&M’s Patent on the “Clamshell” Ride Restraint Design Offer Clues as to What Happened on Goliath at Six Flags Over Georgia?

Incredibly sad news out of Six Flags Over Georgia as it’s being reported one man was killed after being ejected from Goliath, the B&M hyper coaster. Many news outlets have posted pictures of pe…
bgtsafari.com bgtsafari.com
Click to expand...
Had no idea there were that many redundancies built into those restraints.
Read more
Reply
Jimbo
Jimbo
dishstaller said:
Had no idea there were that many redundancies built into those restraints.
Click to expand...
It makes sense, however, I would want more types of restraints, so if one doesn't work, the other does ... the restraints coming over the shoulder I would have expected ... with a Seat belt as last resort.

Fwiw, I inquired with what they use on Coasters at Cedar Point, various Coasters, different restraints according to what the car and track requires ...

NONE of the Coasters at CP use THAT particular system :)
I'm glad to see ...
Read more
Reply
dishstaller
dishstaller
Jimbo said:
with a Seat belt as last resort.
Click to expand...
According to the article, when you see a seat belt on a ride like this, it is basically used as a way of making sure the rider isn't too large/fat to safely ride the ride.
Read more
Reply
Jimbo
Jimbo
dishstaller said:
According to the article, when you see a seat belt on a ride like this, it is basically used as a way of making sure the rider isn't too large/fat to safely ride the ride.
Click to expand...
Well, the over the shoulder support is better, but would require reconfiguring the cars.
Read more
Reply
Jimbo
Jimbo
Heres an article from the Akron Beacon ... seeing Six Flags has bought Cedar Point and Kings Island, they are included ...
I said earlier that Cedar Point doesn't use this type of seat restraint ... well, it does use it, But the difference is, the ones up here ALSO have the Over the shoulder restraint as well ... like I was suggesting that they should have used with the Goliath.

One of the new(er) one at Cedar point the Gate Keeper, uses the Clam shell .. I have rode it many times and have Mostly felt secure, that ride will stop you part way on the ride and you just hang, till the ride is ready to continue ... I typically ride the Front Car ... when its getting ready, you ARE hanging, in the car, looking down .... it would require 2 separate restraint systems to unlock at the same time to possibly get out of it.

Read more
Reply
dishstaller
dishstaller
UPDATE: Six Flags is adding seatbelts to all 9 rollercoasters

www.dailymail.com

Six Flags adds important safety feature after teacher died

Hassan Kariem, 42, was killed at the theme park in Austell earlier this month, after he was thrown from his seat on the Goliath rollercoaster. Four others were injured.
www.dailymail.com www.dailymail.com
Read more
Reply
Jimbo
Jimbo
dishstaller said:
UPDATE: Six Flags is adding seatbelts to all 9 rollercoasters

www.dailymail.com

Six Flags adds important safety feature after teacher died

Hassan Kariem, 42, was killed at the theme park in Austell earlier this month, after he was thrown from his seat on the Goliath rollercoaster. Four others were injured.
www.dailymail.com www.dailymail.com
Click to expand...
Finally ....
Read more
Reply
dishstaller
dishstaller
Jimbo said:
Finally ....
Click to expand...
It DOES kinda seem like a simple safety feature.
Read more
Reply
View all replies (27)
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club

What supplements have you found that really helped your overall health

Didn't see a thread like this so I figured why not start one. This is about natural supplements. If you aren't into supplements, fine, but please let those of us who do want to discuss this discuss it.

The first one I wanted to mention has been a real life changer. I'm 62 and still do all of my own install work at my business....also do all the yard work at the house. A few years ago I started noticing that I was losing my range of movement, it was even getting hard to bend over and lace up my boots. Almost got stuck in an attic because I couldn't get turned around once the work was done. Didn't think much of it and figured with age comes stiffness that was only going to get worse as time went on.
It was then that I stumbled across a video which was discussing rotator cuff tears and why they were to prevalent these days. Turns out, the culprit is a simple deficiency in MANGANESE which is key in keeping your tendons flexible. Most anti-biotics strip your body of any manganese it might have had which is why certain anti-biotics, especially those in the Cipro family. I actually knew a man who had two tendons tear while on that stuff.
Went to Amazon and ordered some manganese. Now it took a while, it wasn't instant, but gradually I have regained all of my flexibility. I can bend over and touch my toes while standing with no pain and putting on my boots is no longer a chore.
Pretty cheap too. The bottle I ordered was a 200 ct for under $13. They said to take double the normal dose for the first month because most people are severely lacking, then go to one a day.
Read more
4 Replies · 50 views
Load Replies (4) Reply Legacy View
  • Like
Reactions: reubenray
dishstaller
dishstaller
Not sure if this would qualify as a supplement but here goes: When I meet someone who is in their 90s and doing very well healthwise I always ask what they attribute their longevity to. Out of all the people I questioned, there was only ONE thing that they ALL did. They all drank some apple cider vinegar daily....usually before bed. You can water it down all you want. Who knows why, but I do it. You want to buy the organic type with the mother.
Read more
Reply
(((Garyd)))
(((Garyd)))
dishstaller said:
Didn't see a thread like this so I figured why not start one. This is about natural supplements. If you aren't into supplements, fine, but please let those of us who do want to discuss this discuss it.

The first one I wanted to mention has been a real life changer. I'm 62 and still do all of my own install work at my business....also do all the yard work at the house. A few years ago I started noticing that I was losing my range of movement, it was even getting hard to bend over and lace up my boots. Almost got stuck in an attic because I couldn't get turned around once the work was done. Didn't think much of it and figured with age comes stiffness that was only going to get worse as time went on.
It was then that I stumbled across a video which was discussing rotator cuff tears and why they were to prevalent these days. Turns out, the culprit is a simple deficiency in MANGANESE which is key in keeping your tendons flexible. Most anti-biotics strip your body of any manganese it might have had which is why certain anti-biotics, especially those in the Cipro family. I actually knew a man who had two tendons tear while on that stuff.
Went to Amazon and ordered some manganese. Now it took a while, it wasn't instant, but gradually I have regained all of my flexibility. I can bend over and touch my toes while standing with no pain and putting on my boots is no longer a chore.
Pretty cheap too. The bottle I ordered was a 200 ct for under $13. They said to take double the normal dose for the first month because most people are severely lacking, then go to one a day.
Click to expand...
Chia Seeds
Read more
Reply
  • Like
Reactions: dishstaller
dishstaller
dishstaller
(((Garyd))) said:
Chia Seeds
Click to expand...
Kinda the whole idea is to mention something and explain WHY it is something we might want to add to our daily routine.
This is what I got from google. Looks like I'm going to be adding them, thanks

Key Health Benefits
    • Digestive Health: One ounce (28 grams) of chia seeds provides nearly 10 grams of fiber, which promotes regular bowel movements, feeds beneficial gut bacteria, and helps prevent constipation. [1, 2]
    • Heart and Cardiovascular Support: Rich in alpha-linolenic acid (ALA)—an essential plant-based omega-3 fatty acid—chia seeds can help lower blood pressure, reduce triglycerides, and improve cholesterol profiles. [1, 2, 3]
    • Blood Sugar Regulation: The combination of soluble fiber and protein slows down carbohydrate digestion, preventing sharp blood sugar spikes after meals. [1, 2]
    • Weight Management: When soaked in liquid, chia seeds absorb up to 10 to 12 times their weight in water. The resulting gel expands in the stomach, increasing feelings of fullness and curbing appetite. [1, 2, 3]
    • Bone Strength: They contain high levels of calcium, magnesium, and phosphorus, which are vital for maintaining bone density. [1, 2, 3]
    • Antioxidant Protection: Compounds like chlorogenic acid and caffeic acid help fight cellular damage from free radicals and reduce chronic inflammation. [1, 2, 3]
Read more
Reply
dishstaller
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

Larry Ellison’s Debt-Fueled Media Bet: Could It Spark a Crash? #shorts

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/shorts/5-kh3ZIy2yc


Direct YouTube Link - Larry Ellison's Debt-Fueled Media Bet: Could It Spark a Crash? #shorts
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 7 views
Replies Reply Legacy View
dishstaller
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club

We're less than 4 weeks away from Voyager 1 reaching a distance of one light day from Earth

I've always been super interested in things space related so this is a pretty cool event coming up. Nov 18, 2026 early in the morning, Voyager 1 will reach the distance of one full light day from Earth. Took almost 50 yrs. I was 13 when it launched.


View: https://www.youtube.com/shorts/gjHK3clOwIw?feature=share
Read more
6 Replies · 132 views
Load Replies (6) Reply Legacy View
  • Like
  • Love
Reactions: Foxbat, FTA4PA, Bobby and 2 others
Foxbat
Foxbat
So, 1/1596th the way to Alpha Centauri (if it were headed that way). 79,800 years to go…
Read more
Reply
  • Like
  • Haha
Reactions: Jimbo, Bobby and Keith Brannen
Bruce
Bruce
Foxbat said:
So, 1/1596th the way to Alpha Centauri (if it were headed that way). 79,800 years to go…
Click to expand...
IMG_2175.webp
Read more
Reply
  • Haha
  • Like
Reactions: Foxbat and navychop
b4pjoe
b4pjoe
Foxbat said:
So, 1/1596th the way to Alpha Centauri (if it were headed that way). 79,800 years to go…
Click to expand...
Thanks for that info. I will mark it on my calendar! 🤣
Read more
Reply
  • Haha
Reactions: Foxbat, Keith Brannen and Jimbo
Jimbo
Jimbo
Bruce said:
View attachment 195010
Click to expand...
Will the Jupiter 2 make it in time ....
Stay tuned ...
Read more
Reply
dishstaller
dishstaller
Foxbat said:
So, 1/1596th the way to Alpha Centauri (if it were headed that way). 79,800 years to go…
Click to expand...
Isn't that insane!!!
To reach the nearest galaxy to ours, at its present speed, will take another 44 billion years.
Read more
Reply
Jimbo
Jimbo
dishstaller said:
Isn't that insane!!!
To reach the nearest galaxy to ours, at its present speed, will take another 44 billion years.
Click to expand...
Turn the Lights out when you get there.
Read more
Reply
  • Like
Reactions: dishstaller
Lon.TV
· posted in Lon.TV

This 32GB AMD GPU Runs AI Text, Images AND Video

Time for another AWESOME video from Lon Seidman of LON.TV!


View: https://www.youtube.com/watch?v=hvZO7aWrIQU


Direct YouTube Link - This 32GB AMD GPU Runs AI Text, Images AND Video
The Official LON.TV Website
Lon on Facebook
Read more
0 Replies · 7 views
Replies Reply Legacy View
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

Untitled Linux Show 276

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/watch?v=b1hqdVSueHk


Direct YouTube Link - Untitled Linux Show 276
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 7 views
Replies Reply Legacy View
Load More
Top
Back