Social Feed

S
Last reply · posted in Over the Air Television By RabbitEars.Info
Ok here's my stats for antennaweb:
50 northwoods rd
wilton, ny 12831

if you click around on the map you get hugely varying results and i'm guessing i'm in one of the areas that is more blue.

All my channels are on the same hill about 40 miles away. I currently have a 80" radio shack combo that worked great in my last house 15 miles away. Now i'm getting the VHF (7 and 12) good (80-95% depending on my aiming) and the uhf servicable (63-70%) with the exception of one channel (CBS, 39). If i tweak the antenna's aim just a little my UHF is affected, but i can change out the CBS channel for ABC (26). It's going in the attic so a rotor isnt an option (and i don't want to deal with it).

I've seen posts on UHF onlys that can pick up the high VHF. Is 7 high? Right now the antenna is in an unused 2nd floor bedroom until i can get in the attic.

1) can i use the antenna now for VHF and combine it with a UHF or will the UHF side screw things up?
2) some of the UHF are going back to VHF when analog goes dark (specifically the one i'm having trouble with).

Would the larger RS 160" combo do it? or can i spend less money somehow else? I need my CBS for football :mad:

Edit: oh and i don't have a pre-amp. suggest that first? I do have a radio shack amplified 4 way spitter but i don't think that's the same right?

TIA
Steve
16 Replies · 4344 views
B
A UHF only will NOT pick up ch 7, usually. The market I work in has 2 v's, ch 11 and 13 (which are combined and go into the very same VHF antenna) and others on the same hill, no more than a 1000 feet away, on 35 through 49 U. Those with U only usually pick up 13V, but not 11V. A combo does all. Being 15 miles away, though, I use a rotor because even ch11 and 13 propagate differently. Sometimes I find this on the U's.

Anyway, our official response to I can get all but ch 11 is you need a combo antenna.
S
yeah i was very surprised when i picked 7 and 12 with the 4228 and 7777 (only get around 40-50% without the pre-amp) but i am (and i'm 40 miles away). So if you have one vhf channel you may be in luck. Who knows?
Rick0725
I took your approach here with very favorable results. I added the 91xg to my setup and used my hd8200p for vhf only.

The 91xg is directional, handles multipath very nicely, is much lighter than a cm4228 (6.5 lbs vs 15 lbs), and would be much more stable in winds. the antennas were spaced about 3 ft apart. the cm 4228 did not work for me here.

the 2 antennas were combined with a cm 0549 vhf/uhf combiner ($7.50 -warren electronics) with only .5 db insertion loss and amplified with a winegard hdp 269 off of the cm0549. the 91xg ($80 -solid signal) would cost less than a cm3671 and would provide better performance on uhf over any combo antenna out there in the marketplace.

I have experimented with many antenna setups during the last 20+ years...cm3671, hd8200p, cm4228, 91xg, etc...and the two antenna setup is the best by far.

you can utilize your current antenna for vhf and combine a top performing uhf antenna for the best of both worlds. I just hate to compromise using a cm 4228 for high band vhf reception.

see avitar.

tower guy check out my current wiring scheme.

-use more filering to pass only vhf and trap a close fm tower (100.9) off the hd8200p (purchased filters from a local company).
-used the hdp 269 as a distribution amp only amplifying uhf on the long runs and passed vhf unamplified.
-the short run to the home theater was not amplified.
-used a winegard fm/vhf-uhf splitter-combiner to further isolate fm from the tv setup and sent the fm signal to the receiver.

this has been the best compromise so far.
Peter Parker
A UHF only will NOT pick up ch 7, usually. The market I work in has 2 v's, ch 11 and 13 (which are combined and go into the very same VHF antenna) and others on the same hill, no more than a 1000 feet away, on 35 through 49 U. Those with U only usually pick up 13V, but not 11V. A combo does all. Being 15 miles away, though, I use a rotor because even ch11 and 13 propagate differently. Sometimes I find this on the U's.

Anyway, our official response to I can get all but ch 11 is you need a combo antenna.

many have said that the Cm 4228 does agood job with HI VHF reception.
T
many have said that the Cm 4228 does agood job with HI VHF reception.

The CM4228 will do an OK job on VHF-hi with anything up to maybe a "red" rated station on antennaweb, and depending on your actual situation may pick up weaker stations also. The simulations show nulls for the Cm4228 on channels 7 and 12 but these are only simulated results and in practice people seem to get good results on these channels also. If you can't get your VHF-hi stations with a CM4228 then you should couple a VHF-hi band antenna - because they are VHF-hi and don't cover the VHF-lo band they are a bit more manageable in size than all-VHF antennas. And if you use a CM7777 preamp you can separate the VHF and UHF inputs and use the preamp to couple the antennas together.
"MysteryMan"
Pub Member / Supporter Cutting Edge
Last reply · posted in Computers and Gadgets
I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.
457 Replies · 46052 views
"MysteryMan"
2026-06 Security Update (KB5094126) Builds: 26200.8655 and 26100.8695 and 2026-06 .NET 80.28 for x64 Client (KB5097149) and 2026-06 .NET Security Update Builds: 26200.8655 and 261`00.8655 (KB509426) have been released. Moderate time needed for those choosing to perform a manual download/install/restart. Quality improvements only. No new operating system features.
  • Like
Reactions: Tweek
B
2026-06 Security Update (KB5094126) Builds: 26200.8655 and 26100.8695 and 2026-06 .NET 80.28 for x64 Client (KB5097149) and 2026-06 .NET Security Update Builds: 26200.8655 and 261`00.8655 (KB509426) have been released. Moderate time needed for those choosing to perform a manual download/install/restart. Quality improvements only. No new operating system features.
My Win10 desktop was freezing all the time and two different guys told me probably needed a new HHD. I am OLD and finally after two days got 10 re-installed. Then I would selet to do update's would lock up. Maybe i should have let it do them at night. I have shut off updates for 30 days to see how it runs. Seems to be running fine but what will happen if it does not update. It was my understanding MS was not going to support them but when i did the new install it gave me the option for them to continue for 6 more months.
HipKat
My Win10 desktop was freezing all the time and two different guys told me probably needed a new HHD. I am OLD and finally after two days got 10 re-installed. Then I would selet to do update's would lock up. Maybe i should have let it do them at night. I have shut off updates for 30 days to see how it runs. Seems to be running fine but what will happen if it does not update. It was my understanding MS was not going to support them but when i did the new install it gave me the option for them to continue for 6 more months.
Why not Win 11?? Why stick with an OS that's losing support?? Win 11 isn't my main OS, but it's not the boogieman people said it was when it first came out
harshness
Why stick with an OS that's losing support??
For me, it is mostly about the abject failure Microsoft's "support" has turned out to be. Their "support" has been at least as much of a millstone as a life preserver. This behavior on Microsoft's part arguably shouldn't be "supported".

The last "Patch Tuesday" (June 9) laundry list included 200 issues, including five known zero-days and one exploited zero-day. There were 38 "critical" vulnerabilities, including 28 Remote Code Executions, four Elevation of Privileges, and an Information Disclosure.

Among all "threat level" classes:
  • 65 Elevation of Privilege Vulnerabilities
  • 19 Security Feature Bypass Vulnerabilities
  • 55 Remote Code Execution Vulnerabilities
  • 30 Information Disclosure Vulnerabilities
  • 7 Denial of Service Vulnerabilities
  • 27 Spoofing Vulnerabilities
According to Bleeping Computer, users who are up-to-date with Windows 11 may experience problems (that don't throw an error) with third-party applications trying to open Office applications using OLE -- a core feature of Office since 1990.

Just yesterday, with the help of a one-man, third-party support site for Windows, I was able to get past a Windows Extended Security Updates activation error that has been plaguing me since October. The fix involved changing an obscurely-named registry entry from one to zero.

I still haven't figured out why Windows thinks I'm enrolled in the Windows Insider Program and, if I am, under what Microsoft account.
HipKat
I read all that stuff, and I feel like blah blah, whatever. I use Windows about 40% of the time now, for work-related things I need Windows for, and none of that stuff affects anything I do. And that includes web browsing and posting forums just like this one.
As for Insider Program, have you checked in Windows Update under the Insider tab to make sure? That's where you join and leave the program
harshness
As for Insider Program, have you checked in Windows Update under the Insider tab to make sure? That's where you join and leave the program
That's where it shows that I'm part of the program. One must log into the associated Microsoft account to opt out of the program.

Many, if not most, users have access to only one computer and can't fall back on another for their secure transactions.

I maintain a Windows 10 machine specifically to do my income taxes.
  • Like
Reactions: Bruno and HipKat
B
Why not Win 11?? Why stick with an OS that's losing support?? Win 11 isn't my main OS, but it's not the boogieman people said it was when it first came out
I did order a new Win11 machine for my office. My old Win10 does meet the requirements to upgrade to Win11, and will move it to my bedroom that will replace a win7 that was really old and really slow.
  • Like
Reactions: HipKat
T
There was a new preview download tonight for those interested in knowing such things.
spacenerd
Last reply · posted in DISH Network Support Forum
I know this is for Dish TV service but was wondering if anyone has gone from Verizon to the Dish Boost Mobile cell phone service and would you recommend it.
John
133 Replies · 6175 views
navychop
CDLs are in BIG demand. Ever notice how close to 100% of OTR trucks have hiring signs on them?
  • Like
Reactions: charlesrshell
HipKat
CDLs are in BIG demand. Ever notice how close to 100% of OTR trucks have hiring signs on them?
That's because the one good thing the administration is doing is finally going after the fake and non-domiciled CDL drivers, opening the door to hire more valid drivers and hopefully will push the rates back up.
A
That's because the one good thing the administration is doing is finally going after the fake and non-domiciled CDL drivers, opening the door to hire more valid drivers and hopefully will push the rates back up.
now let's get rid of the piss tanks and tampons off of diesels aka emissions crap since it can bankrupt someone!!! and get rid of ELD'S since they make some drivers drive like idiots trying to find a parking spot. starter mega carriers should not allow new drivers to train that's just a way for em to move cheap freight..
HipKat
now let's get rid of the piss tanks and tampons off of diesels aka emissions crap since it can bankrupt someone!!! and get rid of ELD'S since they make some drivers drive like idiots trying to find a parking spot. starter mega carriers should not allow new drivers to train that's just a way for em to move cheap freight..
And when they get rid of driver-facing cameras, they'll start to attract the prototypical truck driver back to the industry.
A
And when they get rid of driver-facing cameras, they'll start to attract the prototypical truck driver back to the industry.
i own my own truck i don't have none of that crap :biggrin just an outward facing cam for a**holes in 4 wheelers and the break checker's
HipKat
i own my own truck i don't have none of that crap :biggrin just an outward facing cam for a**holes in 4 wheelers and the break checker's
I thought about just buying my own, but goddang. I bought a nice 2000 W900L in 2004 for $52K. New they were just over 100K. Now, a new KW W990 is over $300,000.00
I couldn't afford a new one, but used truck prices are just as crazy
  • Wow
Reactions: charlesrshell
T
My brother knows a source for lower cost used. They're automatics, if don't mind giving up shifting for self
A
I thought about just buying my own, but goddang. I bought a nice 2000 W900L in 2004 for $52K. New they were just over 100K. Now, a new KW W990 is over $300,000.00
I couldn't afford a new one, but used truck prices are just as crazy
This is still true to this day. The w9's are going for 235.00k to 300k!!! but goddang id''e spend it on a kitty whopper over a frieghtshacker castacrap!!! I only buy new so i can get the manual trans and delete all of the safety crap like adaptive cruise and lane departure warning and all of that crap as that will have you pulling your hair out. truck prices are still crazy today!! and in my line of work i need a 170 inch sleeper since i can't park in choke and pukes or walmarts ;). right now heavy haul is big with all of the AI data centers if your into flat bedding!!! my wife is already looking for our second truck. i just cringe when she shows me LMFAO :biggrin
A
My brother knows a source for lower cost used. They're automatics, if don't mind giving up shifting for self
i know someone that's going to retire he's selling his truck' it has 200k miles on it with an 18 speed and cummings x15 with a 156 inch bunk year is a 2024, there's deals to be found and had out there!!!
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67225 Replies · 2662887 views
  • Like
Reactions: c-spand
Bobby
Always Drive A Cadillac - The Everly Brothers
gms49ers
Slick Black Cadillac - Quiet Riot
EatMyVolts
Geronimo's Cadillac -- Michael Martin Murphey
long_time_DNC
Ray's Dad's Cadillac - Joni Mitchell
  • Like
Reactions: Bobby
H
Pink CADILLAC-Aretha Franklin
comfortably_numb
Pub Member / Supporter
Last reply · posted in Over the Air Television By RabbitEars.Info
I'm still experimenting with OTA antennas at my new apartment. The mudflap works OK, but we had a dust/wind/rain storm the other day and it all but blew it away. I moved it indoors where the antenna is safer but the signals are marginal.

I bought a traditional Yagi antenna from Amazon and it seems to work more consistently, plus it's meant for outdoors where the mudflap is not.

Anyway, I've had success using umbrella bases paired with a fence post for satellite dishes, and I figured that could work for this as well. I'm just not sure where or what to get and what size pole for this application.

IMG_0033.webp
IMG_0034.webp
29 Replies · 554 views
TRG
TRG
I'm still experimenting with OTA antennas at my new apartment. The mudflap works OK, but we had a dust/wind/rain storm the other day and it all but blew it away. I moved it indoors where the antenna is safer but the signals are marginal.

I bought a traditional Yagi antenna from Amazon and it seems to work more consistently, plus it's meant for outdoors where the mudflap is not.

Anyway, I've had success using umbrella bases paired with a fence post for satellite dishes, and I figured that could work for this as well. I'm just not sure where or what to get and what size pole for this application.

View attachment 191342View attachment 191343
Go to Home Depot and buy a length of "Top Rail" used in making chain link fences. I used a 10' section to mount my Winegard which is probably 4X the size of the yagi you bought from Amazon. It's been up for 15+ years of NM springtime winds and storms with no issues. They make 2 sizes. 1 3/8" and 1 5/8" diameter. Do you have a balcony railing you can clamp to?

BTW does that antenna do VHF HI or is it just UHF?
comfortably_numb
BTW does that antenna do VHF HI or is it just UHF?

It does great on VHF. KOAT and KQRE come in good outside

TRG
TRG
I'm pretty sure this is what I used. Dang, the prices sure have gone up. I think I paid $8 15 years ago. :eeek

  • Wow
Reactions: comfortably_numb
comfortably_numb

I suppose PVC would probably work also?
Foxbat
I suppose PVC would probably work also?
Yeah, I guess so. I've never tried that though. I'd be concerned with UV deterioration from the NM sun. Some PVC may be UV resistant. I just don't know.
I would be concerned with the heat and its effect on bending of the PVC. I would think at the 1-1/2" O.D. even Schedule 80 wouldn't be stiff enough to prevent movement in a strong wind. It might be too much movement and deteriorate ATSC reception if it's much more than 4' long.
comfortably_numb
What is the stuff installers use to seal the area around coax point of entry? The Comcast guy used it to seal his RG6 run for broadband. I want to do that for my antenna line..

It's like a clear plastic goo that hardens in a short period of time
primestar31
What is the stuff installers use to seal the area around coax point of entry? The Comcast guy used it to seal his RG6 run for broadband. I want to do that for my antenna line..

It's like a clear plastic goo that hardens in a short period of time
It's called "Coax-Seal". I keep a couple rolls, as it always comes in handy.

  • Like
Reactions: comfortably_numb
dfergie
What is the stuff installers use to seal the area around coax point of entry? The Comcast guy used it to seal his RG6 run for broadband. I want to do that for my antenna line..

It's like a clear plastic goo that hardens in a short period of time
I use RTV.
B
I would be concerned with the heat and its effect on bending of the PVC. I would think at the 1-1/2" O.D. even Schedule 80 wouldn't be stiff enough to prevent movement in a strong wind. It might be too much movement and deteriorate ATSC reception if it's much more than 4' long.
For what it's worth, I've been using a piece of 1-1/4 white PVC well pipe to mount a 90cm dish to a 4x4 post as a temporary mount. Almost 9 years later it's still there and has not degraded in the sun (CT sun might not be as harsh as in NM, but still, that thing is in the sun for most of the day)
comfortably_numb
One of my coworkers found a 6-foot piece of top rail in the garage today.

IMG_0104.webp
IMG_0105.webp
IMG_0106.webp
dennispap
It does great on VHF. KOAT and KQRE come in good outside

I saw your post and I bought the exact antenna hoping to get, specifically, the vhf stations near me but it didn't work.
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
With the 1st Quarter Report just released, Dish lost another 180,000, now at 4.84 Million.

Sling now at 1.79 million subscribers, down approximately 190,000.

For comparison, YouTube TV now has about double the subscribers of Dish and Sling combined.

106 Replies · 4607 views
Scott Greczkowski
I think the way we will see things go (my crystal ball) is Dish will buy DIRECTV and then Elon will buy Dish.
Bruce
I think the way we will see things go (my crystal ball) is Dish will buy DIRECTV and then Elon will buy Dish.
Why would Musk even want them?

Why would anyone pay anything for two providers that lose a million or more subscribers every year each?
charlesrshell
Why would Musk even want them?

Why would anyone pay anything for two providers that lose a million or more subscribers every year each?
Maybe Elon thinks satellite TV will do a come back. I bet he has a Hopper 3 and loves it. Apps keep going up on prices and you need more than one app to see everything you want to see. I think Satellite is the way to go.
T
If they could just get the dish size down
  • Like
Reactions: charlesrshell
dishdude
If they could just get the dish size down

They're back down to the 20" Dish 500
  • Like
Reactions: charlesrshell
navychop
I thought 19".
  • Like
Reactions: charlesrshell
charlesrshell
I thought 19".
Here is a list of Dish reflector sizes I made up long time ago. I think it is still accurate.
  • Like
Reactions: navychop
tornado
Pub Member / Supporter
Last reply · posted in DISH Network Support Forum
My Joey 4 is installed on a bedroom tv.

The diamond buttons had been reset.

I thought this was unusual.

I had to reprogram the double diamond button for PIP which I watch.

No problem.

PIP feature on the Joey 4 had been used to watch two channels at once which I thought was the limitation being only two channels vs.Hopper 3's multi-view four channels.


This time when I selected the PIP feature I noticed an option for Multi-View?


Could this be?


Yes it could.

This software update does this.

Multi-view PIP (4 channels) Is Now Available on Joey 4.

This is freaking awesome and very surprising!!!

Very wonderful for me.
32 Replies · 553 views
jsmit86
I got the Multi-view update for my Joey4s yesterday.
Works great.
Is there some other change? Or more to come?
  • Like
Reactions: charlesrshell
Scott Greczkowski
I got the Multi-view update for my Joey4s yesterday.
Works great.
Is there some other change? Or more to come?
Unfortunately do to NDA's I can't discuss beta features until they are released to the public. But lets just say the DISH team is doing some amazing work. :)
Almighty1
Received this e-mail 3 days ago... At the bottom, it says limited to one Multi-view session per household. How does it work if someone had Hopper 3, Hopper 3 with Hopper Plus, Wired Joey 4 and a Wireless Joey 4 for example? Can they all do Multi-view session at the same time?

1782249008153.webp
navychop
Unfortunately due to NDA's I can't discuss beta features until they are released to the public. But lets just say the DISH team is doing some amazing work. :)

Is there an estimated Amazing Date when we might see the results of this Amazing Work?
  • Like
Reactions: charlesrshell
charlesrshell
Received this e-mail 3 days ago... At the bottom, it says limited to one Multi-view session per household. How does it work if someone had Hopper 3, Hopper 3 with Hopper Plus, Wired Joey 4 and a Wireless Joey 4 for example? Can they all do Multi-view session at the same time?

View attachment 192095
I have all them there models. I know for sure they all have multi-view, but I have not tried them all out at the same time. Wife has the H3+ in use right now. I will try it out tomorrow & report back.
T
Seems confusing; 4k Joey does 4k but Joey 4 does not...
Bobby
Seems confusing; 4k Joey does 4k but Joey 4 does not...
It's pretty much the reverse of that.
Foxbat
My 4K Joey has played 4K, just not 4K HDR.
  • Like
Reactions: charlesrshell
jokeworm
Last reply · posted in What's Cooking?
Ok, I'm bored .... actually - to be more precise - I'm bored of eating the same rotation of 9 or 10 meals that are currently my "go-to" meals. My wife works the long hours - I work from home as and when i feel like it ... which means i generally do most of the cooking ... and so by default - i also make out the shopping list ...

We cook at home 5 or even 6 nights a week - but we always seem to fall back on the same old tried and tested "quick and easy but tastes ok" meals. Week in week out.

Pot Roast - mash and Peas.
Spaghetti
Chicken Pasta in cheese sauce.
Curry & rice
(these are some of mine)

Now it's not that I'm not adventurous in the kitchen ... I'll try anything once or twice ... but we all do it. Unless your name is Martha Stewart or Rachel Ray .. we all eventually fall back on our 8-10 favorite "meals"

So i thought - if we shared some of our own go-to meals with each other ... we might be able to add a few "new" ones to our own arsenal of meals.

So again - I ask you ...

What's for dinner tonight ?

Please give me something new to add to my rotation ... its our weekly shop tomorrow - so i want to pull together a few idea's and try and eat a meal each day next week that I've never had before .. or at least something that is not on my current "go-to" meal plan.

What meal do you always seem to fall back on in your house ? Maybe its something that I've never tried or not had in a while. I need inspiration !! I've got a blank shopping list in front of me - and nothing sounds good .. HELP !
4317 Replies · 330739 views
Former member 208119
salmon with garlic lemon butter sauce and asparagus
  • Like
Reactions: dfergie
Former member 208119
meatloaf stuffed with my home made hot chilli smashed taters green beans
  • Like
Reactions: dfergie
TRG
TRG
Shredded beef and bean stuffed sopapilla with red and green chile.

708442952_1661208669345868_4799380375114968242_n.webp
  • Love
Reactions: dfergie
TRG
TRG
Enchiladas. 1 red chile beef, 1 green chile chicken and 1 chile con queso served with papas and beans.

ht.webp
  • Like
  • Love
Reactions: Bobby and dfergie
TRG
TRG
Shared an assortment of taco's for taco Tuesday. Didn't share the Mexican lager. That was for me.

taco.webp
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
6 Replies · 197 views
  • Like
Reactions: teachsac and Foxbat
teachsac
Premiere: July 23rd
KAB
KAB
My current one month of HBO ends today. Maybe I'll check it out late summer/fall.
cpalmer2k
It seems like Big Bang Theory characters were dropped into the Walking Dead?
navychop
Well, it's part of my $39/$50 DTV MyEntertainment subscription. So we'll likely give it a try.

Watching the Young Sheldon discs we bought. Transfer was well done.
  • Like
Reactions: MikeD-C05 and Jimbo
WALLYWOMBAT
Last reply · posted in DISH Network Support Forum
Recently had a Hopper 3 installed and noticed that I have a green bar at the top of my screen, also occasionally a thin green line on the right side. I have tried switching hdmi ports on the tv as well as different cables. My only thought is that it is the age of the TV. Thoughts and suggestions?
12 Replies · 304 views
WALLYWOMBAT
Tried the Adjust Screen settings and the green bar was still present. Did have a random day when the green bar was gone, but it came back. Did look at the TV setting and found I could stretch the screen a little where the green bar was gone, but it does cut off things across the edges of the picture slightly. Likely will start shopping for a new TV as mine is close to 20 years old and the Dis Remote doesn't seem to like the TV.

Thanks to all for the suggestions.
  • Like
Reactions: charlesrshell
Bobby
Tried the Adjust Screen settings and the green bar was still present. Did have a random day when the green bar was gone, but it came back. Did look at the TV setting and found I could stretch the screen a little where the green bar was gone, but it does cut off things across the edges of the picture slightly. Likely will start shopping for a new TV as mine is close to 20 years old and the Dis Remote doesn't seem to like the TV.

Thanks to all for the suggestions.
Yeah, 20 years is a good time for retirement. You can get a nice new 4K/HDR TV for a very reasonable price even for large ones.
  • Like
Reactions: charlesrshell
navychop
And they will self adjust to report your viewing habits and ….
MikeD-C05
Tried the Adjust Screen settings and the green bar was still present. Did have a random day when the green bar was gone, but it came back. Did look at the TV setting and found I could stretch the screen a little where the green bar was gone, but it does cut off things across the edges of the picture slightly. Likely will start shopping for a new TV as mine is close to 20 years old and the Dis Remote doesn't seem to like the TV.

Thanks to all for the suggestions.
I suggest you get an LG Oled 4k TV. You will love the picture on this thing from all angles in the room. The picture is the best I've seen ever. I have the B 3 series 55 inch TV and it was on sale in the fall of 2024 for like $749.00 - because they sell off their older models when they reach end of year.

I even bought one for my parents. They had a huge living room and sit at the weirdest angles with their furniture and the viewing angle was a problem using just about any TV we tried, but not with the LG Oled Tv. They love the picture. Walmart sells them and so does Amazon.
D
Walmart sells them and so does Amazon.
So does Costco & Sam's Club - & both places give an extended 5-year warranty at no extra charge
  • Like
Reactions: charlesrshell