Social Feed

Anole
Last reply · posted in Free To Air (FTA) Discussion
As much as I would like to put my FTA dish on a short pole in the ground...
Clearing my tree, my neighbor's tree, my house, etc, might be a challenge.

Plus, my house doesn't really have a good "end" to put a dish on.
Just the way the roof is sloped.
If it did, that'd get me the elevation I need.

As for the DBS sats I subscribe to, mounting those dishes on the eaves has worked fine.
I have clear line of sight to both birds of interest, with no problem.
Plus, the dishes aren't that large, heavy, nor cantilevered like a big dish and motor hanging off one side of a pole.

So, I was lamenting my problem, when I realized that I have this 40' telephone pole about 8 feet behind my house.
I put it in 20 years ago for VHF ham antennas, but since the ones on my roof worked so well, I never bothered to use it.
Well, that and climbing it was a bitch. :rolleyes:

There's at least 32 feet sticking up in the air, with some footpegs I put in, but it's not plumb.
I was wondering if the collective minds of this forum might suggest a way to easily put something like a 36" Fortec and HH-90 Stab on the side of this pole?
I'm thinking about half way up would clear everything , not be seen over the house, and be within reach of my ladder.
Or possibly just 10..12 feet up.

My problem is, how do I mount the motor or other dishes to the pole?
Put a short "mast" on the side of the pole, with spacers, and make it plumb?
Hopefully, the wisdom of the group will offer better ideas.

Thanks for your interest. :)
.
11 Replies · 5666 views
Anole
thanks

I knew if I waited a day, I'd get some more good responses.

Actually, the first idea using the mount that came with the dish is probably fine.
I'll have to find where I lost it last year, dig it out, and see how it fits to the pole.
That might just be dandy.
Plus, I'm not at all against a little metal work if it's necessary...

As for then 40's, the only 40's I see around here are at night, and that's +40ºF !
Days are high 60's.

I did borrow the chief traffic signal manager and his bucket truck, to put in the foot pegs.
But that was some years ago, and he's probably dead, now.
Wherever the top of my ladder goes, is probably high enough to clear some trees (or nuke 'em), and that's low enough to not be seen over my house.
So, I don't really think the retuning and alignment will be all that bad.
(famous last words)

You know, a little observation platform up about 30 feet would be pretty nice.
Maybe with a big beach umbrella for shade.
Fine place to have a beer and watch the sun go down (or come up, depending on your preference).

Last time I was up a pole (other than mine), was in Vietnam, and I was just one of several guys taking turns putting foot pegs in a 90 footer.
Them suckers wiggle when you're half way or higher !
Luckily, I wasn't the one at the top when we helicoptered in a big LPV antenna for the MARS station!

As for the giant totem pole, I did have some American Indians living next to me a few years ago.
I should have asked them to give me some carving tips, and get it properly blessed.
Might prevent the city from ever trying to touch it... :)


How I got the pole:
My neighbors had heard me wish for a pole many times.
One day, I came home and they said they'd gotten me something, and it was in the back yard.
I asked how big, and they held up their hands about 8 inches apart.
I was afraid they'd gotten me a little dog or a cat.
When I got back there, I found a 40' pole laying on the ground.
The city had removed them from our street, and put in cast cement poles.
They asked the installers if they could have one, and had it dropped over my back fence as a present!

I eventually dug a hole by hand, and tried everything to get the pole up.
That's not something you really want to try, without the proper tools.

One day, the power company was working behind my lot, and I struck up a conversation with the crew.
They had a claw for setting poles, a big bucket truck, and were working on or around my transformer.
They loaned me an 8-foot shovel with a funny end to dip out the bottom of my hole, and next day dropped it in place.
I'd offered them some beer or whatever they wanted but they insisted on soda only.
Thinking they'd get a 6-pack each, they were quite surprised when each team member got two cases of their favorite flavor.
Talk about a good deal for me!
They even threw in a bag of foot pegs to go with my pole.
M
As for the giant totem pole, I did have some American Indians living next to me a few years ago.
I should have asked them to give me some carving tips, and get it properly blessed.
Might prevent the city from ever trying to touch it...

Last line was good for a laugh...

;)
SatelliteAV
Wood grain will twist depending on moisture content.

Several years ago we installed a 36" dish on a 30' utility pole for a customer who needed the height to clear a neighbors home. After warning the customer about the problems associated with using a wood post for a mounting platform, we installed the system. The wood swelled and twisted clockwise during the rains and shrunk and twisted counter clockwise during the dry months. After several seasonal re-aims for the customer, he contructed a galvanized tri-leg tower and after one more service call to move the dish to the new metal tower, he hasn't had an aiming problem since.
Anole
Thanks for the sage advice, Brian.

The height of the pole (even if I just use 10..12 feet at the bottom) gets me over a lot of obstructions, and I don't currently have a good option.
Fortunately, the dry season here is about 10 months long, and the wet season is little more than damp.
Also, my creosoted pole is probably 40+ years old (guessing by how long I've had it and how long the city used it).

I may give it a try, and keep an eye on the problem you described.
In the meantime, I'll be on the lookout for something better.

...where's my carvin' knives...?? ;)
R
I'll put my input in here, I am a ham as well and work in the commercial communications industry. If you are hell bent on going to the telephone pole there are special galvinized mounts that are two piece of angle iron welded into a shape of a V, there is a pipe in between these to pieces of angle iron. Obviously the tele pole will go right into the notch made by the angle iron. Then you will have your nice piece of pipe to mount your dish too. We just put a bunch of these in for a waste water district, except we were mounting yagis to them. I also like the suggestion of building the platform like a deer stand.

Now I am in the process of mounting my 1.2m on my rohn 25g. I have a 50 footer at the side of my house. I chose to mount it at the 20ft mark. That way I can work from my roof to do anything I need to my dish. I usually put my climbling harness on b/c it has a built in seat makes it more comfortable to work. I mounted the 1.2m a few feet above my deeteevee dish. I got that thing up there and its rock solid! I will do a full thread with pics once the project is done. I am planing when the ground thaws to put in my 7 foot c band dish, and there is no WAY that is going on the tower.

Bob/N1XBM
Pittsville
Obviously you should inspect your pole for deterioration or damage before working on it.

Methods include probing the pole below the ground level with a large screwdriver for rot, and hitting the pole on four quarters with a sledge hammer, listening for a hollow sound indicating interior decay or insect damage not visible on the outside of the pole.

As you climb the pole, check each step for looseness as they can sometimes be pulled out of the pole by hand fairly easily, and try to maintain 3-point contact (two hands and one foot always on the pole or two feet and one hand always on the pole as you ascend or descend the pole).

It is not recommended to go from one side of a stepped pole to the other side while up on the pole but some people do it, rather than climb all the way down to change sides. If I did that I would make sure I was belted onto the pole with the safety strap before doing it.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68613 Replies · 2678114 views
  • Like
Reactions: c-spand
gms49ers
Brothers in Arms - Dire Straits
  • Like
Reactions: FTA4PA
sdfntx
The Smothers Brothers Theme - Mason Williams
FTA4PA
We Just Disagree - Dave Mason
H
JUST You n' Me-Chicago
  • Like
Reactions: gms49ers
gms49ers
Saturday in the Park - Chicago
JSheridan
Lifetime Supporter
Last reply · posted in DISH Network Support Forum
I know HipKat said that they were working on conversions but we got the official news yesterday right from Dish that starting next month all DMA's will be on the western arc, and all customers will be assigned to that. That's gonna mean a lot of customers around here aren't gonna get Dish unless there are exceptions. Too many mountains and trees.
157 Replies · 4427 views
Foxbat
Unless Dish acquires DirecTV and its mid-USA satellite slots, I may not have Dish Network to reach 40 years. Or, I guess we could buy a new house…
  • Like
Reactions: charlesrshell
S
Even if you are broadcasting old SD-only shows, I would think advertisers would still want their commercials to look good.
  • Like
Reactions: charlesrshell
Jimbo
Even if you are broadcasting old SD-only shows, I would think advertisers would still want their commercials to look good.
Advertisers on SD channels are probably Far and Few, very hard to find, they have very few viewers to watch them.
  • Like
Reactions: charlesrshell
Mister B
Advertisers on SD channels are probably Far and Few, very hard to find, they have very few viewers to watch them.
I watch mostly SD channels (H&I, Start and ION, etc.). There are plenty of advertisers, this time of the year it is mostly Medicare Advantage plans, auto extended warranties and the occasional walk-in-tub. They know who is watching.
S
Unless Dish acquires DirecTV and its mid-USA satellite slots, I may not have Dish Network to reach 40 years. Or, I guess we could buy a new house…
have charlie buy you a new house :biggrin :clapping
  • Like
Reactions: charlesrshell
T
Well, I didn't immediately think of broadcast, where there are all kinds of digital "subchannels"- I remember back when digital broadcast began that supposedly the 6mhz channel would likely support just 1 HD program and that the added subchannels would likely have to remain SD. I don't watch enough broadcast to know. Are there a lot of the subchannels in SD-only, and how do they do that, like are they in 4:3 or some kind of low-res widescreen?
  • Like
Reactions: charlesrshell
Foxbat
have charlie buy you a new house :biggrin :clapping
Unfortunately, I don't think my social proximity to Charle Ergen provides any special perks. Maybe if Foxbat, Jr. were to marry his daughter…🤞🏻🤣
S
Unfortunately, I don't think my social proximity to Charle Ergen provides any special perks. Maybe if Foxbat, Jr. were to marry his daughter…🤞🏻🤣
that would be one hell of a convo :biggrin.
osu1991
Well, I didn't immediately think of broadcast, where there are all kinds of digital "subchannels"- I remember back when digital broadcast began that supposedly the 6mhz channel would likely support just 1 HD program and that the added subchannels would likely have to remain SD. I don't watch enough broadcast to know. Are there a lot of the subchannels in SD-only, and how do they do that, like are they in 4:3 or some kind of low-res widescreen?
New more efficient encoders. I think there's around 60 channels/sub channels now in the Tulsa dma. 480 widescreen for most of the sub channels, but some have 2 HD channels and a couple of SD sub channels while others have 1 HD and 5 or more SD sub channels. If they moved to mp4 or hevc encoding they could do higher bitrates for SD or more HD or even 4K in that 6Mhz channel. That could render some early digital tvs unable to tune though as they may not have the codecs for that. Considering 4K tvs have been on sale for years, I think it would be a very small minority of TVs with the problem. I'd rather see that happen and keep ATSC 1 than continue the move to a DRM enforced ATSC 3 world.
S
I watch mostly SD channels (H&I, Start and ION, etc.). There are plenty of advertisers, this time of the year it is mostly Medicare Advantage plans, auto extended warranties and the occasional walk-in-tub. They know who is watching.
can't forget the little blue m&m's
T
Last reply · posted in Free To Air (FTA) Discussion
Picked up a sweet directv dish, mount, twin lnbs and a short cable.
Has anyone converted one to FTA? A Frankenstein of sorts...
9 Replies · 536 views
Titanium
Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2
LNBF mount.webp
  • Like
Reactions: TVHabit and FTA4PA
k4otl
To add: 101W Ku seems to be (one of if not the) strongest for me, and if I only had Ku I definitely want 101W for the music mux, it's robust FEC and strong signal help a lot. I've thought about using a used Dish/DirectTV dish at my Dads to supplement his OTA (mainly for my benefit when I visit :) )
  • Like
Reactions: TVHabit
cyberham
I used a 60cm Shaw Satellie dish (60e) with its original dual-LNB. It worked fine for 101W/97W or 99W/103W at that time when weather was fine. But the fade margin was small so rainy weather killed reception or almost so. But it was all free since they're so plentiful so I couldn't complain.
  • Like
Reactions: TVHabit
Titanium
A Shaw dish with the linear LNBFs are as rare as hens teeth in the US... :)
  • Like
Reactions: TVHabit
T
I used a 60cm Shaw Satellie dish (60e) with its original dual-LNB. It worked fine for 101W/97W or 99W/103W at that time when weather was fine. But the fade margin was small so rainy weather killed reception or almost so. But it was all free since they're so plentiful so I couldn't complain.
Free is good
  • Like
Reactions: FTA4PA and freddylq
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
154 Replies · 2240 views
  • Haha
Reactions: Mike0616
M


They get cruel sometimes, very very cruel.😈. Hated to see my dawgs go down but I still say being ranked #1 is a hex on you!
  • Like
Reactions: Howard Simmons
Jimbo
They get cruel sometimes, very very cruel.😈. Hated to see my dawgs go down but I still say being ranked #1 is a hex on you!
Yup, I agree, I'd rather be 2 or 3 till the last few weeks.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Love this guy's channel. Looks like Walmart has thrown in the towel when it comes to conventional car batteries.

I bought a new AGM battery from Walmart about a year ago, it is already needing replacing. I thought about just buying a regular battery but from what I've read, that might not be a smart move. Might check my Forscan program and see if I can change the battery type from AGM.


View: https://www.youtube.com/watch?v=awe7kY5nvdU
16 Replies · 164 views
harshness
When you need a battery, you need a battery.

If you can wait, new technologies are on the not-too-distant horizon.

You're probably doing something wrong if you're only getting a year out of an AGM battery. Heat and infrequent charging both significantly reduce lifetime.
Jimbo
The guy in the Video, REALLY needs to TAKE a Breath ...
If he'd Slow down, you could figure out What he's testing and on what. :(
harshness
If he'd Slow down, you could figure out What he's testing and on what.
You can't view his videos passively.

I appreciate this approach to videos that take an hour to deliver a fraction of the same data.

Now, if YouTube were required to flag the AI "reviews", that would really be something.
dishstaller
You're probably doing something wrong if you're only getting a year out of an AGM battery. Heat and infrequent charging both significantly reduce lifetime.
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
Jimbo
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
And the Walmart ones mostly had very little warranty.

My last AGM (using now) I got from O Rielly's, its the Super Start ... I got the Platnium, they had several to choose from.
TRG
TRG
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
I've been buying my batteries from AutoZone. I avoid Walmart whenever possible.
  • Like
Reactions: Jimbo
dishstaller
I appreciate this approach to videos that take an hour to deliver a fraction of the same data.
That's the way I feel about it.
I hate those videos where they show themselves slowly opening up the box and unwrapping it.
His videos are probably the fastest pace test videos on Youtube.
  • Wow
Reactions: Jimbo
T
He sounds like he's trying to sell me a pocket hose.

I just had to replace a car battery this week and thought I'd look into LiFePo4. Amazon has plenty of them, but all have top posts and only one 'also' has side connections (Group 75).Then I read that they're really lousy in the cold. So, an AGM, but again, almost nothing with side terminals instead of top. In researching that, I read that most mfrs in recent years have dropped side terminals and gone back to the old top posts, which is surprising to me since those are more corrosion-prone, cause the battery to need more space and are generally more hazardous. Finally I just threw up my hands and bought a regular lead-acid at Sam's Club. They had a Group 75 "Duracell" with side terminals only. It was virtually the only such battery with side posts on their shelves
arlo
Had a Die Hard in my folks cellar for over 6 years. Pulled it out, slapped it on a charger for a day. Put it in my 'Cuda and drove it around for a week of my vacation. Next year, the same. But my dad kept it topped off for me.It was a mid 80's battery in early 1990.

Flooded acid batteries like a float voltage of around 13.5-13.8 voltage.
AGM needs a float of 14.2 volts. So if you slap an AGM in where a flooded was. It never gets a full charge.
"Why do they die so fast?" Question answered. There are folks who sell voltage regulators for alternators that are designed to boost float voltage for AGM batteries.
The other way around? Flooded will gas-off a little at 14.2 volts. But seems to tolerate it pretty good.

Lithium car/bike/atv batteries. After 3 batteries in my Harley. The OEM flooded and two AGM's (before the 14.2 volt float requirement to let them live was learned). I bought a lithium for it. 4 year, no gripe warranty after having it tested by an approved store.
The thing started like Thor himself sent a bolt from the sky. Except......try to start it around freezing? Nope. Needed a heating pad.
And I usually like to park it around events in the evening with the parking light on. Looks cool like that.
We could traipse around for a few hours no worries. Hop on, fire it up, and go putt around.
Lithium? A Dakota Lithium at least. The BMS shuts it right down if it discharges below <something>.
Come back. Parking lights off. Won't start. And you know the rest. But it lasted 6 years. A lot better than 'new every two'. And the fact that powersports batteries are warranted for six, maybe nine months. Ludicrous.

I called Noco. Asked all of the right questions. Great warranty. Save some bucks ordering directly, faster service that the wally world alternative.
They addressed (or claimed over the phone) that the shut down was addressed. Sure. The BMS keeps it form being damaged. But if it is shut down because it does become low. Shut down any load (key on, parking or headlights left on) for 10-15 minutes and you get a second try to start your rig. Not a bad thing if it really works. Right?!

Exide, Interstate? Be very afraid. They ain't what they used to be. In Florida my '70 Cutlass had an Interstate (early 90') that lasted 6 years until it dropped its plates at an intersection and boiled over. In Florida, mind you. The last Interstate.....done in 2. Guys down there would suck out the acid and put water in shortly before the warranty ran out. Make it to the auto parts, get them tested. And get a new one pro rated. No more pro rating.
You can't beat an Odyssey. Napa, AC Deco (the better ones). Yup.
The mom and pop Car Quest only sells Die Hard. For a reason, the old man says. So they convinced that a Die HArd Platinum was the hot ticket for me. l will see. Stand by!

You can't cut Mr. Project Farm down. He does great tests of all sorts of things. Not sponsored and pressured to slap a little sugar on his comparisons and reviews. Compared to the Brits and Aussies with their constant overzealous and same sounding (Dave from EEVblog) rant. I like P-Farm a lot. Of course I like AvE (Boltr) too.
Reminds me to beware when wearing shorts around the garage vice.


Opinions may vary.
harshness
And the Walmart ones mostly had very little warranty.
The days of the 84-month warranty appear long gone, regardless of brand or where you acquired it. Warranties tend to be shorter, with much greater dependence on quick prorating.

The big problem for lead-acid batteries (whether flooded or AGM) is that the US no longer produces lead (the last smelter closed in 2013) and must import it.

Recycling covers a good chunk of the need (~70%), but it isn't free.
K
Pub Member / Supporter Lifetime Supporter
Last reply · posted in TV Shows
Season 2 order already in hand:

'Star Trek: Starfleet Academy' Renewed for Season 2, Tatiana Maslany to Guest Star in Season 1

I've not been optimistic about this show based on what I've read so far. Seems to be aimed at a younger audience. Interesting though that Tatiana Maslany will have some sort of role.
95 Replies · 3771 views
harshness
Females wearing any clothing is unthinkable on Ferenginar.
  • Like
Reactions: Foxbat
long_time_Dish
Females wearing any clothing is unthinkable on Ferenginar.
Was never a huge of the Ferengi-centric episodes in Trek...
Jimbo
Was never a huge of the Ferengi-centric episodes in Trek...
Me either ...
They turned out to be a Poor adversary ....
Foxbat
They got their proper due on "Deep Space Nine"
  • Like
Reactions: long_time_Dish
long_time_Dish
They got their proper due on "Deep Space Nine"
And too many episodes centering on/around them as well...
harshness
They turned out to be a Poor adversary ....
As has always been the case for those consumed by their own financial enrichment. ;)
S
Last reply · posted in The Chit Chat Club
The title was to catch everyone's eye lol! But it is a thought I've been having as I dev a Roku app for a client. You see many MAAANY years ago I got really interested in cable TV channels and even chatted with a regional carrier, Insight about what it took to get a channel number. It was surprisingly easy although prohibitively expensive.



You could petition, reserve a high channel number, they monitored performance and if they liked you, you'd get lower channel number overtime and cut into ad overlays.



Roku has a similar setup. Make an app, if it has a strong, original linear component you could get channel assignment on The Roku Channel.



As mixed as my feelings are on the current media landscape, I can't help but feel a little excited interest when I scope out the apps in the Roku store.
4 Replies · 87 views
navychop
Hmmm. I think Roku will last. But will Firestick? With their backing, I guess so. Apple TV STB? Of Course. Walmart? Seems someone ought to go, but with their backing?….

Off brands have, as probably expected, very short lives.
S
Hmmm. I think Roku will last. But will Firestick? With their backing, I guess so. Apple TV STB? Of Course. Walmart? Seems someone ought to go, but with their backing?….

Off brands have, as probably expected, very short lives.
All of those services have FAST Channels. FAST is a linear online broadcast stndrd. You notice how their linear channels all have some overlap? They are gettting paid for every second those streams are up without really having to do their own accounting. Best part is they don't even facilitate any of the stream bandwidth. Over glorified app stores on some android hardware. No reason NOT to stay in the game.
harshness
It is largely because of the standard Roku remote that channel numbers are a distant memory on the streaming side of things. Because their competitors followed suit only reinforces that they were right.

Linear TV's death is a direct result of DVRs giving you what you wanted when you wanted it; why go back?
harshness
FAST is a linear online broadcast stndrd.
FAST is uniquely popular as a way of saving money. It isn't so much about consumption as passing time.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in TV Shows
Don't know if any of you have watched this series yet, it would be interesting to see if you feel this review was accurate. It was very humorous to listen to however.


View: https://www.youtube.com/watch?v=9tsDO3y8I2c
3 Replies · 140 views
KAB
KAB
What a "pile of slop" review! I liked the show.
  • Like
Reactions: Yespage and NYDutch
Y
What a "pile of slop" review! I liked the show.
If the review is like the article, oi! Eighteen paragraphs into the review and... all they've done is not really talk at all about the actual thing they are reviewing.

Halfway into the "written" review, I know more about how the writer "thinks" than I do about what they are writing about. I understand their politics, their self-overestimated understanding of film, their inability to be funny.

Takes about 22 paragraphs to get to one that starts "Anyway, the story kicks off...". Talk about Slop! 😂
  • Like
Reactions: KAB
harshness
Punditry is alive and well and just as divisive as ever.
Gary Toma
Staff member Pub Member / Supporter Cutting Edge
Last reply · posted in DIRECTV Technical Resources Forum
The TPN Map Excel Presents all DIRECTV Channels:
​
National (50-States or wide/NAT+PR beams)
Local (Local-Into-Local or narrow/Spot beams)
​
Additional tabs provide:​
OTA the (Over-The-Air) Database
VOD (Video On_Demand) Records
Offline Records
Engr Records
Net Decoder a graphic presentation of all satellites and transponders
​
Domestic Satellites
@99W...... D11, D14
@101W.... D16
@103W.... D12, D15
@110W.... D5
@119W.... D8​

Understanding the TPN Map

Making Sense of the TPN Map Display Conventions
2164 Replies · 940281 views
K
660 CAVLIERS, 668 TWOLVES and 680 SPURS are now available
K
WPLG Miami is testing on the stream server again

EDIT: It's now available for streaming customers
  • Like
Reactions: Nate.O’Brien
M
660 CAVLIERS, 668 TWOLVES and 680 SPURS are now available
Still with Choice package? My stepdad says when the game started he got black screen and something to do with not the right package.
He had the Twins the last 2 years and I saw the Wild screen on 668-1 when I was there a few weeks ago.
K
There were some technical issues during the pregame, where 668 was showing the Pacers feed instead of the Timberwolves feed until a few minutes before the game.

On the stream API it looks like some areas need the Sports Pack, what's his zip code?
  • Like
Reactions: Mr Tony
K
The BLUES, BLUJCKTS, HURCANES and WILD channels are now active and no longer pointing to the TV Promise slate
  • Like
Reactions: dtv757 and Mr Tony
dtv757
For those dazn nba channels are they sat only or sat & streaming