Thanks for the reply. Yes, the 705 is the AV reciever. Like I said, I'm sure it's me. I'll try your suggestions tonight. How did you set yours up to watch TV? Did you create an activity to "watch tv", or "watch pvr"?
Please understand that it's been a while since I programmed mine. I remember that I had to "start over" a couple of times. I had to get used to the process and what questions the setup software was going to ask (and in what order).
How you set up your activities is entirely dependent upon how you use your equipment. At my house, when we say we're going to "watch TV", what we really mean is, we're going to "watch TV as supplied by the satellite receiver". So in essence we're watching satellite. A "Watch PVR" activity is probably correct in this case.
The satellite receiver controls the channel, the Sony AV receiver controls the volume (and the input is Video2), the Plasma controls the video source switching so it gets turned on and set to HDMI1 for satellite.
There is no "DVR" button on my 880 so I made one in the lower right side of the "soft buttons" area of the remote. I think I had to make one other button that we were using but didn't appear on that screen when we were watching TV. Again, if you have to go into the DEVICE control during normal use, you probably want to tweak your setup for that activity.
I leave the satellite receiver "on" all the time. OH! And I made a button that says DVD-R. See... I have component from satellite receiver going to DVD recorder. I have an activity "PVR2DVD" where I can set up the DVD recorder on the correct input. Then I go back to the "Watch PVR" activity and now that DVD-R button that I created in the "Watch PVR" activity can start the recording on the DVD recorder.
Think of it this way if it helps... you can put DEVICE controls (like "record" from the DVD recorder) into ACTIVITIES. This way the regular "Record" hard button on the 880 will be used to handle DVR recording on the 622 while I'm in the Watch PVR activity, but I still have access to the DVD "record" button in my custom button.