Social Feed

S
Supporting Founder
Last reply · posted in TV Shows
VOOM HD NETWORKS' FEBRUARY 2007 PROGRAM HIGHLIGHTS​


FOR IMMEDIATE RELEASE – VOOM HD Networks (www.Voom.com), television's largest and most diverse suite of high-definition channels has something for everyone. Available nationally on the DISH Network, VOOM HD Networks' channels provide breathtaking content that raises television to a new level of experience. The 15 VOOM channels offer great TV made in stunning HD and 5.1 Dolby® Digital surround sound, commercial free and 24-hours-a-day. Programming includes animation, family fare, movies, sports, fashion, music, art, travel, culture, video games, and news in an ever-expanding slate of new original programming. Details of the February 2007 program highlights are as follows. Photos are available to press upon request. Schedules are subject to change.

ULTRA HD— The hottest fashion, the coolest styles and insight into the luxe life from around the world
Single this Valentine's Day? Then spend your evening with ULTRA HD's special block of programming celebrating the one love of your life that will never let you down! Sole Mates: A Valentines Day Celebration of Shoesfeatures the premiere of two all new specials as well as a new look at the best of the channel's past programs about footwear!

Kick Up Your Heels: A Full Frontal Fashion Special
Premieres Wednesday, February 14th at 8:00pm ETon DISH channel 9478
This one-hour special edition of America's top fashion program celebrates women's romance with shoes. Model/actress Beth Ostrosky (also known as the love in Howard Stern's life) is the guest host, with special reporting from Full Frontal's correspondents Lloyd Boston, James Aguiar, Christina Ha and Judy Licht. Highlights of this program include an insider's look into Glamour magazine's accessory closet; a trip to Ferragamo's shoe factory in Florence, Italy for a behind-the-scenes look at the making of a pair of high-end shoes; a feature on women's passionate attachment to shoes with psychoanalyst Dr. Gail Saltz; special interviews with hot shoe designer Stuart Weitzman and trendy new-comer Holly Dunlap of Hollywould; tips on how to shop for vintage shoes; and extreme shoe makeovers for three women who are making major footwear faux pas.

Behind the Label: Ferragamo
Premieres Wednesday, February 14th at 9:30pm ETon DISH channel 9478
Host Judy Licht and the Behind the Label crew jetted off to Italy, the country that sets the standard of fine shoe making, to explore the empire of Ferragamo. Judy speaks with key players from this family-run business that has become a global institution. Viewers also get a behind-the-scenes look at the headquarters housed in a 13th-century Florentine palazzo, the shoe-making artistry in the factory, and the fields of their medieval Tuscan estate, Il Borro.

TREASURE HD — The first channel for the 70 million people with a passion for collecting
Magnificent Obsessions
New episodes on Saturdays at 12:00pm ET on DISH channel 9473
The second season of TREASURE HD's original half-hour series Magnificent Obsessions continues in February with more profiles of people who have turned their everyday interests into a passion that drives their lives. For these individuals, it's not about hobbies – it's about a lifestyle. This month the series will head into battle with Civil War re-enactors (2/3), fly high with a family of glider-plane junkies (2/10), spend Christmas with some people that are truly crazy about the trimmings (2/17), and explodes onto the scene with a fireworks designer (2/25).

RAVE HD — Music like you've never experienced it on TV before: the world's top acts in high definition and 5.1 Dolby® surround sound
Talks with Dave Fanning: Peter Frampton
Premieres Friday, February 9th at 10:00pm ET on DISH channel 9470
Get ready for the Grammy's with RAVE HD's special half-hour interview with Peter Frampton, a two-time nominee this year. With his good looks, his monster hits of the '70s (Show Me the Way, Baby, I Love Your Way), and Peter Frampton Comes Alive! (still the top-selling live album ever), this legendary artist achieved a pop status that sometimes eclipses his continuing influence as one of the best guitarists in rock 'n roll. Dave Fanning's fascinating interview with Frampton explores his days in The Herd as "The Face of 1968"; his part in the groundbreaking band, Humble Pie; his work on George Harrison's masterpiece All Things Must Pass; his tour with school-chum David Bowie, and, of course, his acclaimed new album, Fingerprints. Immediately following the interview, catch an encore presentation of Frampton's Soundstage concert, which premiered on VOOM last September.

Dave Fanning's other guests this month include David Gray (2/16), the critically acclaimed singer-songwriter; and New Order (2/23), one of the most popular bands of the 1980s and a highly influential force in the alternative rock and dance music scene. Talks with Dave Fanning offers one-on-one interviews that give new insight and a provocative look into the work and careers of celebrated musicians. Host Dave Fanning is a legendary Irish radio DJ, renowned for giving U2 their first significant airplay and for hundreds of interviews with the world's most famous rock n' roll stars.

GALLERY HD — Stunning imagery and stories from the front line of the art world
Opera Lovers Take Note!
Beginning Sunday, February 18th at 12:00pm ET on DISH channel 9472
With its high drama and grand spectacle, opera is enjoying a huge resurgence in popularity. GALLERY HD will now present all the glory of opera in stunning high definition and 5.1 Dolby® Digital surround sound. Each Sunday, the channel will showcase a different world-class opera. The series will kick off on February 18th with Handel's Giulio Cesare, as presented by the UK's Glyndebourne Opera House. Sung in Italian, the opera stars critically acclaimed mezzo-soprano Sarah Connolly. Opera magazine says that "Sarah Connolly is surely one of the best Handelians today." The music is provided by the Orchestra of the Age of Enlightenment, the UK's leading period instrument ensemble. Next up will be Verdi's Otello (2/25)starring José Cura, who is ranked among the world's leading interpreters of Verdi's music. The production was recorded live at the Gran Teatre del Liceu in Barcelona. All the operas will include English subtitles.

RUSH HD — Life on the edge with the adrenaline junkies of adventure sports
Nomads
New episodes premiere Friday nights at 10:00pm ET on DISH channel 9476
Only a select few have what it takes to live the life of an action sports athlete. "Nomads" are those select few who travel searching for the most perfect spots, the best competition, and a place to make their mark. When they find it – they don't leave without giving it their all, proving their worthiness to the sport they love. This dynamic series follows these world class athletes, documenting the amazing locations and their death-defying feats of athleticism. This month's episodes feature heli-skiing in the remote mountains of Alaska (2/9); daredevil motocross riders performing in the streets of Louisville, Kentucky (2/16); and a professional freeskier who tries his luck with the dangerous sport of Base jumping.

GAMEPLAY HD — The high definition channel leading the next generation of TV for gamers
GAMEPLAY HD PRESENTS:
GAMECASTER'S BATTLEFIELD 2142 INVITATIONAL
First episode premieres Thursday, February 15th at 10:00pm ET on DISH channel 9485
A true breakthrough for gaming on television, this original eight-part half-hour tournament series follows the frenzied combat between eight teams invited to compete on a pre-release version of EA's highly anticipated new game, Battlefield 2142, for the PC. The exciting game play was all captured using the Gamecaster Cybercam S2, a patent-pending camera technology that creates a 360° view of the "world" inside a game. This remarkable advancement allows a professional sports cameraman to shoot a video game tournament with the precision and fluidity of a real-life pro sports event. The tournament is hosted by video game enthusiast Sonny Sandoval, best known as the lead singer of the multi-platinum rap-rock band P.O.D.

EQUATOR HD—The most extraordinary places and people on the planet
The Megafalls of Iguaçu
Premieres Wednesday,February 7th at 8:00pm ET on DISH channel 9471
On the border of Brazil and Argentina rages one of the most spectacular secrets of the natural world – Iguaçu Falls, one of the planet's largest waterfalls and a fearsome display of the raw power of water. Iguaçu National Park is a biological hotspot for some of South America's most amazing animals, but this refuge is fighting for survival. Small, dedicated teams work tirelessly to guard it from the encroachment of poachers and illegal deforestation. Drastic action is needed, but it is a hard place to police. In the wet season, up to 300 individual falls drain from the hundreds of miles of surrounding forest. In this program, marvel at the beauty of the falls in stunning high definition, and find out if this magical place can be saved.

ANIMANIA HD--Eye-popping HD animation for all ages
Pixcodelics
New Episodes each Saturday in February at 3:30pm ET on DISH channel 9474
Catch five brand new episodes of the original animated series Pixcodeliocs this month on ANIMANIA HD. This cartoon, produced exclusively for ANIMANIA HD, follows a group of cyber-savvy teens as they battle to protect the Internet and the world from an evil genius and his dastardly pet cat from the future.

VOOM's HDNEWS — The only HD source for 24/7 news, sports, weather
Ecological and Environmental Challenges Facing America
Special reports throughout the month of February on DISH channel 9482
HDNews will take a high-def look at the ecological and environmental challenges facing America today. This special series will feature in-depth reports about rising sea-water levels on the Gulf Coast; the great environmental threat to Alaska caused by rising temperatures and melting ice flows; and how the destruction of wildlife and flora is causing global warming.

WORLDSPORT HD—Live sports coverage from top worldwide arenas
SPANISH PREMIER LEAGUE (SPL) SOCCER
Airing on DISH channel 9477 - Check local listings for times
The World Cup's television ratings in America outpaced the World Series this year, introducing millions of new fans to players like Ronaldinho, David Beckham and Fabio Cannavaro. These superstars are all part of the Spanish Premier League, widely acknowledged as the world's top soccer league. WORLDSPORT HD continues its live coverage of the SPL through June. Prior to each match, catch La Liga Report, a half-hour in-depth look at the league and at news surrounding the sport's most popular stars. Specific schedule details, including updates regarding player line-ups and start times, as well as La Liga Report highlights, are available online at www.worldsporthd.com.



VOOM HD: EVERY MOVIE FAN'S DREAM​

HUNDREDS OF TITLES FOR EVERY TASTE, ALL REMASTERED FROM 35MM INTO STUNNING HD​





MONSTERS HD—The masters of movie horror in terrifying HD clarity
Six high-def premieres this month, DISH channel 9481
  • <LI class=MsoNormal style="MARGIN: 0in 0in 0pt; tab-stops: list .5in; mso-list: l0 level1 lfo1">Blade Runner: The Director's Cut (1882) – Directed by Sir Ridley Scott (Alien, Thelma & Louise), this film was a flop when originally released in theaters. However, it achieved cult status through re-issue on television and home video. The film stars Harrison Ford and Rutger Hauer (2/3 at 1:45pm ET) <LI class=MsoNormal style="MARGIN: 0in 0in 0pt; tab-stops: list .5in; mso-list: l0 level1 lfo1">Night of the Creeps (1986) – This film is a cult favorite and is not available on home video or DVD. It features special effects created by the award-winning make-up artist, David Miller, famous for his work in Michael Jackson's "Thriller" video. (2/4 at 5:15pm ET) <LI class=MsoNormal style="MARGIN: 0in 0in 0pt; tab-stops: list .5in; mso-list: l0 level1 lfo1">Bram Stoker's Dracula (1992) – Produced and directed by Francis Ford Coppola, this film is based on the novel Dracula by Bram Stoker. It stars Keanu Reeves, Winona Ryder, Gary Oldman and Anthony Hopkins (2/14 at 8:00pm ET) <LI class=MsoNormal style="MARGIN: 0in 0in 0pt; tab-stops: list .5in; mso-list: l0 level1 lfo1">Salem's Lot (1979) – This made for TV movie, based on the novel by Stephen King, originally aired on CBS in 1979. The movie stars David Soul (famous for his portrayal of Hutch on the popular TV series Starsky and Hutch and James Mason (a world-renown English actor). MONSTERS HD will premiere the entire movie, uninterrupted with bonus gory scenes. The new footage incorporates graphically violent scenes that were omitted from the original US broadcast, but distributed internationally. (2/17 at 12:15pm ET) <LI class=MsoNormal style="MARGIN: 0in 0in 0pt; tab-stops: list .5in; mso-list: l0 level1 lfo1">A Return to Salem's Lot (1987) – This is the sequel to the made for TV movie based on Stephen King's novel Salem's Lot. It stars Golden Globe winner Michael Moriarty. (2/17 at 3:30pm ET)
  • Christine(1983), Directed by John Carpenter, one of the most accomplished and influential horror and science fiction directors in Hollywood, this movie is based on the novel by Stephen King. It tells the story of an antique automobile possessed by supernatural forces. (2/18 at 6:30pm ET)
KUNG FU HD — All martial arts action, all the time
Kung Fu All-stars: Bruce Lee
A different film each Wednesday night at 8:00pm ET on DISH 9479
Bruce Lee is widely regarded as one of the most influential martial artists of the 20th century. Lee's films sparked the first major surge of interest in Chinese martial arts in the West and, though American born, he became an iconic figure particularly to the Chinese; as he portrayed Chinese national pride and Chinese nationalism in his movies. Films in this series include: Fists of Fury (2/7), The Chinese Connection (2/14), The Way of the Dragon (2/21), and Game of Death (2/28)

FILM FEST HD — A non-stop film festival for movie fans
All new high-def premeires! DISH channel 9480
  • <LI class=MsoNormal style="MARGIN: 0in 0in 0pt; COLOR: black; tab-stops: list .5in; mso-list: l1 level1 lfo2">Cool World (1992) – From the mind of animation ledgend Ralph Bakshi, this film merges live actors with animated characters. A cartoonist (Gabriel Byrne) finds himself in the animated world he created; and he is seduced by one of his characters, Holli Would (voiced by Kim Basinger), who wants to become human. Brad Pitt plays a human who has chosen to stay in "Cool World" to serve as a police officer. (2/9 at 8:00pm ET) <LI class=MsoNormal style="MARGIN: 0in 0in 0pt; COLOR: black; tab-stops: list .5in; mso-list: l1 level1 lfo2">Slam (1998) – This film won awards at the Cannes Film Festival and the Sundance Film Festival. It tells the story of a gifted young MC trapped in a housing project ruled by gangs. Unable to find a job, he copes with the despair and poverty of his neighborhood by using his wits and verbal talent. (2/26 at 8:00pm ET)
  • Basquiat (1996) Basquiat tells the true story of the meteoric rise of youthful artist Jean-Michel Basquiat. Starting out as a street artist, Jean-Michel is "discovered" by Andy Warhol and becomes an international sensation. The film was the acclaimed directorial debut of renouned painter Julian Schnabel, and stars Jeffrey Wright asBasquiat, Dennis Hopper, Benicio Del Toro, Parker Posey, Tatum O'Neal, Gary Oldman, Courtney Love and David Bowie as Andy Warhol. (2/27 at 8:00pm ET)
5 Replies · 3965 views
S
Added some of the schedules at the bottom of above post.
S
added equator and gallery
riffjim4069
I sure do miss some of the VOOM HD channels...:(
dfergie
I totally missed this, but it repeats at 7am Est... Blade Runner on MonstersHD...
S
Thanks for posting the schedules, they do help alot...
JSheridan
Lifetime Supporter
Last reply · posted in DISH Network Support Forum
I know HipKat said that they were working on conversions but we got the official news yesterday right from Dish that starting next month all DMA's will be on the western arc, and all customers will be assigned to that. That's gonna mean a lot of customers around here aren't gonna get Dish unless there are exceptions. Too many mountains and trees.
175 Replies · 5037 views
S
Even if you are broadcasting old SD-only shows, I would think advertisers would still want their commercials to look good.
  • Like
Reactions: charlesrshell
Jimbo
Even if you are broadcasting old SD-only shows, I would think advertisers would still want their commercials to look good.
Advertisers on SD channels are probably Far and Few, very hard to find, they have very few viewers to watch them.
  • Like
Reactions: charlesrshell
Mister B
Advertisers on SD channels are probably Far and Few, very hard to find, they have very few viewers to watch them.
I watch mostly SD channels (H&I, Start and ION, etc.). There are plenty of advertisers, this time of the year it is mostly Medicare Advantage plans, auto extended warranties and the occasional walk-in-tub. They know who is watching.
S
I watch mostly SD channels (H&I, Start and ION, etc.). There are plenty of advertisers, this time of the year it is mostly Medicare Advantage plans, auto extended warranties and the occasional walk-in-tub. They know who is watching.
can't forget the little blue m&m's
charlesrshell
can't forget the little blue m&m's
That's what my wife calls my Viagra!!
T
Why didn't Charlie end up launching starlink
  • Like
Reactions: charlesrshell
S
That's what my wife calls my Viagra!!
My gf is 29 years younger than me :shh
Almighty1
Why didn't Charlie end up launching starlink
He does not have the resources aka $$$ compared to Elon Musk as in reality, Elon can eat Charlie for lunch or even mop the floor with Charlie if he wanted to.
  • Like
Reactions: charlesrshell
S
ment to 20 yrs dam phone
  • Like
Reactions: charlesrshell
BradleyD
Dish should use both satellite and internet like they do now for all channels. Use either or or both.... like now but subscribers could choose something like internet only, or sat only, or both.
  • Like
Reactions: charlesrshell
S
Dish should use both satellite and internet like they do now for all channels. Use either or or both.... like now but subscribers could choose something like internet only, or sat only, or both.
They have sling tv wich sucks ass it needs a major upgrade
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68638 Replies · 2679288 views
  • Like
Reactions: c-spand
EatMyVolts
The 59th Street Bridge Song -- Simon & Garfunkel
long_time_Dish
52nd Street - Billy Joel
ClarkGable
Caribbean Queen - Billy Ocean
  • Like
Reactions: dishstaller
dishstaller
Don't Stop Me Now - Queen
long_time_Dish
Don't Stop Believin' - Journey
T
Last reply · posted in C-BAND Satellite Discussion
Howdy folks long time no write.

Issue(s): Horizontal transponders (esp. Weigel mux) breakup/mosaic/sputtering audio, JTV less so (but received perfectly up until a month or so ago.
Vertical is fine (Daystar). Up until recently couldn't even get any signal on Weigel Mux but JTV was perfect.

What I did to improve things: A slight westward move improved reception but only slightly (approx 72 on the micro HD, sorry no dB to post). I removed the 3-way C-Band splitter and used a 2-way to get a 1-2 db signal gain ( the power port goes to the Startrak - the micro HD doesn't have enough juice ! (1st clue) even after swapping the switching power supply it came with with a heftier linear 12 V supply (less RFI too !).
I have had issues with the uHD before signal breaking up that a reboot would clear up (clue #2 = dying tuner?) - FYI, I reinforced the IF input and removed all flux from the pcb completely with a Flux Removal Pen (MG Chemicals Cat No. 4140-P) which definitely makes a huge difference.

I went outside and pushed and pulled reflector slightly and no improvement. Pole (actually tower in yard - the neighbours love me..NOT) is plumb, checked with carpenters level. Dish was last peaked in 2017 or so, after overhauling 24" Von Weise, new Acme, fresh grease, etc. Focal length, f/d ratio etc meticulously adjusted. One panel has a tear so planning to repair that this weekend when my cousin comes over ( to help me out (old guy here) forecast calls for sunshine.

What has changed: My utility company has installed new high tension line poles (one smack dab in the middle of 101°W target! But they put it in last year and reception (of JTV (HOR) at least) was fine, BUT when they came out to transfer the wires over this year from the old (sawed in half) pole that's about when the troubles started (coincidence?), but again Daystar (VER) was fine. I always had this pole in the light of sight of 101° before with no issues. (fyi my zenith sat 74° is unobstucted, but can't test)

In the meantime Weigel mux is trying to break in MOSTLY in LATE at night (less cell usage?) (audio not video except for a frame here or there) so don't know what has changed with this mux which suddenly "woke up". I have never had to fuss with dish moves on this satellite ( the slightest move +/- motor clicks loses lock, wheres normally on C-band I can go significantly wider east or west and still have a strong signal ( have these gone "spot beam" or narrower somehow and what is the slight difference in Az listed on Lyngsat to 100.9° affect things ( isn't that the declination i.e. requiring a tweak of declination?).

Long story short (too late, ha), if I had another DVB-S2 box to try and / or a newer more stable PLL lnb ( I have been meaning to upgrade many a time but never got arround to it) I could determine if it's my antiquated receiving equipment, or my dish/feed alignment ( doubtful as it tracks everything from 55 °W to 133 ° W nicely.) or the dreaded 5G! (BUT only on HOR and not VER?).
I read another post where the OP (with his smaller 7.5 footer) played around with the illumination to peak desired transponder and reduce qrm on interfering/ stronger xpndrs (even on 103° W). So will play with that too - and cut away the RG-6 a and pull up a fresh section with new PPC and coax Seal. Open the throat cap see if any cobwebs are there and check servo operation (also changed in last maintence 10 years ago).

Finally, this will probably be the last chance I get to play with the BUD from the looks of it (providers leaving, auctioning off rest of spectrum imminent above 4.0 Ghz, and to keep the peace with neighbours so it would be nice to have that mux back for the long, cold and dark winters to comfort this old man before I call it quits and buy a VHF/UHF/FM Yagi and get MeTV, H&I from my Vermont local stations (checked at a friends today and they come in nicely - except ABC) .
Only one guy in town (Montreal) I may be able to get a receiver or PLL lnb from to try (RPS Sat) so hopefully with elimnate that as a possible culprit. Be nice to pick up a cheap or used PLL lnb to try w/o 5G BPF (money is tight )

Like others I couldn't care less about "tv" (well maybe just a liitle or a lot) it's the challenge that excites me , I can get MeTV other ways OTA (no pirate crap).

So what do you guys (and gals) think ?. p.s. I don't have a spectrum analyzer and there are def/ cell towers nearby (half a Km or so away).
Oh and time permitting will hammer out dings too and wire damaged mesh on one section for an extra dB or two. Hesitate to touch Declination, Elevation and pole mount but will play around with those a little too... Why is this mux for finicky suddenly ?(8psk, 5/6 fec, beamwidthetc.. man wish they went back to VER I think everthing would be fine! For the engineers out here does 5G QRM affect one poliarization (HOR) more than another (VER)? I understand the strong interference swamps out the input mixer/local oscilator in the hapless old C-band lnb (I think it at time affect KU too esp. LPB on 101°W KU - incidentally thos were weak or "gone' but are back almost at the time MeTV improved..hmm Terrestrial interference?

Any thoughts or suggestions ( cheap or free solutions please) greatly appreciated. Cheers.

p.p.s. Micro HD can't display Decades and Toons but records them fine so I can watch on another box/media player (Ali chip set issue). Another reason to upgrade.

Anybody interested in a nice C/KU system free ? (for next Spring/Summer 2027)

[Sami 10' mesh, Corotor II+, Eagle Aspen (very old) C-band lnb, Norsat Ku lnb, Channel Master C/Ku (H/V) switch, Startrak 400 Analog receiver w/ motor control, Geosat uHD DVD-S2, CW600S for Mpeg-2]
17 Replies · 643 views
arlo
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?
B
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!
S
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!
8 1/2 Foot mesh here with the c140 lnbf and a verizon 5g tower nearby. Got no issue with the Metv transponder. Are you sure you have the lnbf setup correct? When I set my c140 up I noticed it was about 1/4 to 1/2 inch pushed in closer to the dish, sticking out of the scaler ring than my old lnbf was. Thought I may have trouble with that but my signal readings are higher than they had ever been.
B
8 1/2 Foot mesh here with the c140 lnbf and a verizon 5g tower nearby. Got no issue with the Metv transponder. Are you sure you have the lnbf setup correct? When I set my c140 up I noticed it was about 1/4 to 1/2 inch pushed in closer to the dish, sticking out of the scaler ring than my old lnbf was. Thought I may have trouble with that but my signal readings are higher than they had ever been.
Thanks for the info. I'll do a detailed feed alignment this weekend. I have to be on a ladder to tweak this 101w satellite with the MeTV mux. Luckily I've got a V8 Finder so I'll put that to use. Funny, I got the MeTV mux fine this Friday morning. Jewelry TV was completely garbled though. I'm wondering if I'm having 2 degree spacing problems more than the cell tower affecting me. Seems strange some days I'm fine and others MeTV is completely destroyed. In the old days I could just move the dish to 99w and see what's there adjacent to MeTV. Maybe if I optimize my feed I can eliminate my problem either way. I have a 9 foot spun aluminum dish that may not have the best two degree isolation. Some of these were crudely made with a poor parabolic shape. I'll keep you posted and thanks to all for the advice!
arlo
Just some rambling here. Be safe on that ladder.
Took me about 20 seconds looking at a YouTube video showing the V8 Finder in use. A spectrum analyzer display.
Well, Cool! And it can power an lnbf stand alone. More cooler.
Well there's your 5g interference wonderment solution. IF you had a spare C band lnbf. Put it on a stick and go "wardriving". If 5g towers are blowing out signals strong enough to cause interference in your dish. Well.....
And off-axis, not in the same direction as the dish is pointed? Don't exactly know.

Take a drive around and look at towers with microwave dishes bolted to them. You'll see that a large share of them do have a perimeter shield. Further diving into the likes of Andrews show shields as an optional add-on to do just what you think they should do. Block adjacent interference. Probably a good idea when multiple units are on the same, or adjacent towers. Ya' think?

Some not-so-many years ago when I dove into this whole dish antenna thing. I replaced the c/ku band corotor feed with a Titanium C2-W. Being a good boy. Assuming that the original scalar was in the proper position from day one back in the 80's. I followed instructions and stuck the unit in the hole and bolted it down at the stamped marking as per instructions. I got my first signal finally with the Zgemma H7. I was thinking "that's it?". Signal sucked.
Then I looked at how the corotor feed was located looking at the bolt marks on the tube.
It was like focusing a telescope or camera. In the end. I was getting pretty good signals. That was in the dead of winter. And I hate the cold.

A buttonhook feed support. Give a margin of adjustability versus perimeter arm scalar supports.
And a lot of reading and experimenting showed that although the scalar was probably where it should be. Isn't anymore. The focal length / fd ratio calculations probably are right. If you have a perfect parabolic dish.
Mine ain't. And its old. Most probably not a perfect parabola since it was. As well as the polar mount. Fabricated locally.
I spoke to the old guy who installed all of them here back in the heyday. Started installing Prodelin dishes.
Everyone was watching HBO and Playboy. At 3-5 grand a pop.
He told me that him and his sons made a concrete form. Finished with a plaster top coat. And started spraying resin and chopped fiberglass. Then a metal flame sprayer like is used to build up crankshafts and stuff. Finished with several more layers of 'glass. The rest. Polar mount, cast iron pole mount. Contracted locally.
That's the story. I took that old beast and if you've seen Pootie Tang. I juvenated it and then rejuvenated it.

I think that one thing to remember is that in an lnbf. All of the satellite signal amping is done in the low noise amplifier section. What signal is blown out to the coax is done in the intermediate frequency amplifier section.
So what comes in the waveguide is what it is.
I've used several receivers. Different Enigma2 images on the same receiver show different signal levels. It's a software thing. Signal calibration and display. Don't forget that. One image might not give a signal lock on a weak transponder. Fire up another? Look at the TNAP images. An option to display signal below lock.
The only real way to tell the absolute signal level you get in the house is to use a certified spectrum analyzer/service monitor.

BTW. I'm on MeTV right now. Book 'em Danno. Purposefully aimed off-axis just above the threshold of pixelation.
Only thing I see is that the sun came and the sun went. That's where I saw break up for a half hour or so.
B
Just some rambling here. Be safe on that ladder.
Took me about 20 seconds looking at a YouTube video showing the V8 Finder in use. A spectrum analyzer display.
Well, Cool! And it can power an lnbf stand alone. More cooler.
Well there's your 5g interference wonderment solution. IF you had a spare C band lnbf. Put it on a stick and go "wardriving". If 5g towers are blowing out signals strong enough to cause interference in your dish. Well.....
And off-axis, not in the same direction as the dish is pointed? Don't exactly know.

Take a drive around and look at towers with microwave dishes bolted to them. You'll see that a large share of them do have a perimeter shield. Further diving into the likes of Andrews show shields as an optional add-on to do just what you think they should do. Block adjacent interference. Probably a good idea when multiple units are on the same, or adjacent towers. Ya' think?

Some not-so-many years ago when I dove into this whole dish antenna thing. I replaced the c/ku band corotor feed with a Titanium C2-W. Being a good boy. Assuming that the original scalar was in the proper position from day one back in the 80's. I followed instructions and stuck the unit in the hole and bolted it down at the stamped marking as per instructions. I got my first signal finally with the Zgemma H7. I was thinking "that's it?". Signal sucked.
Then I looked at how the corotor feed was located looking at the bolt marks on the tube.
It was like focusing a telescope or camera. In the end. I was getting pretty good signals. That was in the dead of winter. And I hate the cold.

A buttonhook feed support. Give a margin of adjustability versus perimeter arm scalar supports.
And a lot of reading and experimenting showed that although the scalar was probably where it should be. Isn't anymore. The focal length / fd ratio calculations probably are right. If you have a perfect parabolic dish.
Mine ain't. And its old. Most probably not a perfect parabola since it was. As well as the polar mount. Fabricated locally.
I spoke to the old guy who installed all of them here back in the heyday. Started installing Prodelin dishes.
Everyone was watching HBO and Playboy. At 3-5 grand a pop.
He told me that him and his sons made a concrete form. Finished with a plaster top coat. And started spraying resin and chopped fiberglass. Then a metal flame sprayer like is used to build up crankshafts and stuff. Finished with several more layers of 'glass. The rest. Polar mount, cast iron pole mount. Contracted locally.
That's the story. I took that old beast and if you've seen Pootie Tang. I juvenated it and then rejuvenated it.

I think that one thing to remember is that in an lnbf. All of the satellite signal amping is done in the low noise amplifier section. What signal is blown out to the coax is done in the intermediate frequency amplifier section.
So what comes in the waveguide is what it is.
I've used several receivers. Different Enigma2 images on the same receiver show different signal levels. It's a software thing. Signal calibration and display. Don't forget that. One image might not give a signal lock on a weak transponder. Fire up another? Look at the TNAP images. An option to display signal below lock.
The only real way to tell the absolute signal level you get in the house is to use a certified spectrum analyzer/service monitor.

BTW. I'm on MeTV right now. Book 'em Danno. Purposefully aimed off-axis just above the threshold of pixelation.
Only thing I see is that the sun came and the sun went. That's where I saw break up for a half hour or so.
Well summing it up in one word...success! I spent about 2 hours tweaking the feed. Found I was almost 2 inches too far from the actual focal length. Plus adjusting the skew just a hair made a big difference. I measured 3 points around the dish from the edge to the outside of the scalar ring. One side measured 51 inches and the other 53, Adjusting the button hook feed I was able to get it 52 inches all the way around the dish perimeter to the scalar. I had my doubts this would fix anything but when I turned on the satellite finder I had all the channels in the MeTV mux coming in clear! No more fading away different times of the day and night. Plus the Jewelry channels are all solid also. I'm just wondering...did this just give me more signal to overcome the interference or did properly aligning the feed effectively "blocked out" the 5G interference? Sort of wondering about sidelobes in the old parabolic antenna manuals of the 80s. Just happy to have things working correctly now. Thanks to all who helped especially to Arlo who spent a lot of time commenting to me. Best regards!
primestar31
Well summing it up in one word...success! I spent about 2 hours tweaking the feed. Found I was almost 2 inches too far from the actual focal length. Plus adjusting the skew just a hair made a big difference. I measured 3 points around the dish from the edge to the outside of the scalar ring. One side measured 51 inches and the other 53, Adjusting the button hook feed I was able to get it 52 inches all the way around the dish perimeter to the scalar. I had my doubts this would fix anything but when I turned on the satellite finder I had all the channels in the MeTV mux coming in clear! No more fading away different times of the day and night. Plus the Jewelry channels are all solid also. I'm just wondering...did this just give me more signal to overcome the interference or did properly aligning the feed effectively "blocked out" the 5G interference? Sort of wondering about sidelobes in the old parabolic antenna manuals of the 80s. Just happy to have things working correctly now. Thanks to all who helped especially to Arlo who spent a lot of time commenting to me. Best regards!
Do NOT mess with it anymore just "trying to get it a tiny bit better" than you just got it... I've been through that HELL more times then I'd want to admit.
arlo
Very cool there Brown's. My intentions are good. Sometimes tact....not so much.
I'm glad you could read through the nebula of gunk.
If I can dig through my pictures directory you might pick-up a few things I've done to and made to get as perfect alignment as possible. Your journey shows how a bit of common sense and experimentation while using known guides as a starting point (at least). The phone book just isn't full of big dish service providers like way way back.

To help. A true parabola will converge all incident rays. Light, RF. At one single point. You kind of answered your question. Two inches too close/far from the convergence point (focus) degrades signal strength. If you ever get a chance to examine a telescope. The eyepiece is on a rack. You can adjust the position of the eyepiece distance from the objective. Depending on the eyepiece. The sharpest focus is only at one finely adjusted distance.
Make sense?
And for a telescope made with mirrors. The ultimate eyepiece aim. Imagining a tiny spot right in the center of the glass lens. Will be aimed exactly at the center of the mirror. A small mirror, prism, adjustment screws assists in attaining that perfect place where a star way way back in time shows as a perfect spot. Not an ellipse, etc.
Yeah.

Who knows about the 5g thing? Did your tweaks optimize where the receiver finally got enough usable DVB signal to lock onto them and reject 5g? The crowded room full of drunks thing?

Edit:
Yeah that tiny little bit can drive you nuts.The best and only way is to find a weak transponder on a sat that doesn't "swamp" signal levels. With a matching opposite polarity having close to the same signal level.
There will be a lot of tweaking with an extended arm and......thick cotton gloves. Your body, extremities, close to the lnbf will effect signals. Then just when you think you got it. In your case. Climb down the ladder and get out of the way to see what becomes.
I got obsessed and was out there in 10 degree winter on a step ladder on clear nights.
Tweaking elevation, azimuth, declination. Unbolted actuator gearbox and vice grips. Trying to get the best of the best tracking. Adding those porch rail stainless steel turnbuckles and catv messenger wire from the rim to the scalar to bring 'er back into kilter did wonders. Don't be me. Watch MeTV!
M
Last reply · posted in Over the Air Television By RabbitEars.Info
Interesting article about the work being done to develope an ATSC 3 converter box. Yes it does mention affordable.
11 Replies · 575 views
primestar31
DEATH TO NEXGEN!
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
Mister B
What bothers me is the total waste of broadcasting spectrum in this very crowded market. It has been almost three years now since KFOX converted their broadcast tower to ATSC 3.0 and moved all of their channels to other towers causing noticeable degradation of the picture quality.
I have a Sony TV with 3.0 capabilities but still use the 1.0 version of locals due to the fact that one or all of the 3.0 channels are often missing or unwatchable. In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.
The only thing that could motivate me to be interested in 3.0 would be if all of the minor networks (diginets) could be in at least 720P rather than blurry ultra-compressed 480i.
Three years is long enough to waste one of the few available RF frequencies in the area for this trial.
It is time to either move on with this experiment or call it quits.
navychop
In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.

They might notice the hand going into their pocket for their wallet.
  • Like
Reactions: FTA4PA
navychop
It is time to either move on with this experiment or call it quits.

QFT. Of course, my preference involves a curb and some kicking.
  • Like
Reactions: FTA4PA
S
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
WHAT ABOUT THE INTERNET PART OF IT. NO ONE WANTS A BOX CONNECTED TO THE INTERNET EITHER.
navychop
Cough, cough. COVID vaccine implants.

:oldlaugh
  • Haha
Reactions: HIFI
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Love this guy's channel. Looks like Walmart has thrown in the towel when it comes to conventional car batteries.

I bought a new AGM battery from Walmart about a year ago, it is already needing replacing. I thought about just buying a regular battery but from what I've read, that might not be a smart move. Might check my Forscan program and see if I can change the battery type from AGM.


View: https://www.youtube.com/watch?v=awe7kY5nvdU
20 Replies · 276 views
harshness
When you need a battery, you need a battery.

If you can wait, new technologies are on the not-too-distant horizon.

You're probably doing something wrong if you're only getting a year out of an AGM battery. Heat and infrequent charging both significantly reduce lifetime.
dishstaller
You're probably doing something wrong if you're only getting a year out of an AGM battery. Heat and infrequent charging both significantly reduce lifetime.
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
Jimbo
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
And the Walmart ones mostly had very little warranty.

My last AGM (using now) I got from O Rielly's, its the Super Start ... I got the Platnium, they had several to choose from.
harshness
And the Walmart ones mostly had very little warranty.
The days of the 84-month warranty appear long gone, regardless of brand or where you acquired it. Warranties tend to be shorter, with much greater dependence on quick prorating.

The big problem for lead-acid batteries (whether flooded or AGM) is that the US no longer produces lead (the last smelter closed in 2013) and must import it.

Recycling covers a good chunk of the need (~70%), but it isn't free.
EarDemon
I've always got regular OEM Ford Motorcraft batteries from the dealership and have never really had an issue. On my old Lincoln Aviator (the SUV from the early 00s, not the CUV of today), I had some phantom drain and went though a few batteries, but that was an anomaly and with the standard warranty I got free replacements. Taking the Aviator out of the picture, I've bought two batteries in my 24 years of driving. One battery replacement in my Mountaineer, one in my Navigator. But I probably would have had another one had I kept it around longer. Didn't have the Bronco long enough, and so far still on the factory battery for my Expedition.

I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner. I'm in Buffalo, 90 degree summers and 0 degree winters. Once in a while in the dead of winter I'll get an alert from the Ford app saying remote features have been disabled to conserve battery, but it starts right up.
dishstaller
I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner.
warrior.webp
primestar31
I've always got regular OEM Ford Motorcraft batteries from the dealership and have never really had an issue. On my old Lincoln Aviator (the SUV from the early 00s, not the CUV of today), I had some phantom drain and went though a few batteries, but that was an anomaly and with the standard warranty I got free replacements. Taking the Aviator out of the picture, I've bought two batteries in my 24 years of driving. One battery replacement in my Mountaineer, one in my Navigator. But I probably would have had another one had I kept it around longer. Didn't have the Bronco long enough, and so far still on the factory battery for my Expedition.

I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner. I'm in Buffalo, 90 degree summers and 0 degree winters. Once in a while in the dead of winter I'll get an alert from the Ford app saying remote features have been disabled to conserve battery, but it starts right up.
But do you have a license plate mounted on your car? lol
EarDemon
Yes, but with smokey covers. I realize they are not a countermeasure for photos or photo radar, but it helps obscure from the average persons eyeballs. Plus with the way licensee plates peel around here, it keeps them protected from the elements.

When I went to a countermeasure meetup over the summer, one of the guys who's planning on doing a cannonball had a plate flipper. While I play fast and loose (pun intended) with these idiotic traffic laws, a plate flipper is something I wouldn't dare use. Although having one in the front to flip to no license plate when traveling though states that don't require one is tempting. Am I really going to get pulled over in Kentucky for having no front NY license plate? This way it cuts down on reflective surfaces and might be helpful with laser avoidance and gives the jammers a better chance to react especially on a larger vehicle. Although LEO is typically trained to hit headlights with their LIDAR.
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club
3 Replies · 39 views
Bobby
Rest in peace.
sdfntx
Sorry to hear this. R.I.P.
FTA4PA
R.I.P.
N
Last reply · posted in DISH Network Support Forum
My OTA is not working anymore. This started after the latest update. I have the OTA dongle with a OTA antenna that I've been using for years. My hopper does not recognize the dongle anymore and when I go to the OTA setting, it has a screen that says to plug a dongle into the USB. I tried unplugging and plugging back, in the same usb port and other ports. The Hopper does not recognize it. Anyone have same issue?
204 Replies · 5651 views
  • Like
Reactions: charlesrshell
dishstaller
Installed an off-air antenna a couple days ago for a customer who had just cancelled his Dish service. He had a dual off-air adapter and gave it to me. Cool. I'll keep it on the truck....might come in handy. Got to admit I don't watch anything as far as live tv goes anymore. Even if we have severe weather, our local channels will have a live feed on Youtube.
navychop
In other news, it was announced that the software fix for the two tin cans and a string will not be forthcoming. A hardware fix is required. However, that fix will let you receive stations from a gazillion miles away.

Truck roll charges may apply. Two year commitment required.
brittanygarden
Hi all. If you were using a single tuner USB OTA adapter that is no longer working, please PM me. Thanks. :)
Jim5506
Hi all. If you were using a single tuner USB OTA adapter that is no longer working, please PM me. Thanks. :)
I have the dual tuner OTA adapter currently connected, but I have 2 of the single tuner OTA adapters that I can quickly connect - neither is seen by my H3.
  • Like
Reactions: charlesrshell
B
Got the dual tuner OTA adapter, was able to set it up and get back my OTA channels. Thanks to everyone and extra thanks to the DISH reps in this forum!
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 20 views
meStevo
Lifetime Supporter
Last reply · posted in The Sports Section
Schedule drops tomorrow. Mandatory mini camps in June. Hall of Fame game August 6th.
128 Replies · 2416 views
  • Like
Reactions: Jimbo and dfergie
rvvaquero
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.
Y
Jerry Jones and Jimmy Johnson had an argument about who was responsible for the dynasty building of the early 90's Cowboys.

The rest of us figured it out in about 3 years, Jerry has had over 30 years but still can't admit it. It's all he lives for, to show everyone he can put together a winner. I don't think he can. His kids only know what he taught them.
Johnson built it, but without the Herschel Walker trade, it never happens.
  • Like
Reactions: AZ. and b4pjoe
b4pjoe
Johnson built it, but without the Herschel Walker trade, it never happens.
Jerry made himself General Manager after he bought the team but make no mistake Jimmy engineered that trade. As well as a lot of others at the time.
rvvaquero
Jimmy Johnson is a football guy. Jerry Jones is a marketer (hustler).

When I see a football player get a 15 yard penalty for unsportsmanlike conduct (like taunting) in a close game, I often wonder what he was thinking. Was he thinking, I'm doing everything I can to make this a better team and help win a championship? Or, was he saying to himself, I want everyone to notice how great I am?

Johnson inspires one, Jones the other.
meStevo
Got to unfurl and hold the flag at Allegiant for the anthem today - amazing experience.
HipKat
Balls
Bears. Gave the Pats a good beatdown.
Bucs. Got Baker back and absolutely demolished the previously surprising Panthers.
Falcons. Took care of the 49ers and did so convincingly.
Vikings. I hate them. I do. I've never seen such a bad/good team. Know what I mean? I know their D is epic. But their O is insulting. How they remain undefeated is a mystery.
Rams. Finally looked the part. Mind you against the hapless Cards.
Cowboys. Fireworks performance from their O.
Dolphins. Finally logged in a W. There won't be many. Enjoy it, Miami fans.
Browns. Still atop the AFC North.
Giants. Epic OT win with Buffalo's very own Motor Singletary finishing it off.
Seattle. Dominated KC from start to finish.

Goats
Jets. Couldn't beat the winless Dolphins. Aaron Glenn is a dead man walking.
Eagles. Injured beyond repair
Ravens and Lamar. Has he ever played a full season? Honestly, dude is fragile. Of course he's back for the Bills game.
49ers. No longer undefeated.
Colts. A sh*t show. When are they gonna realize that Daniel Jones is ass?
Steelers vs Saints game. Ass, just ass all around. Those poor people in Paris have had enough lately, and on top of that, endure that game.
Chiefs. They looked terrible. Like really bad.
Pack vs. Detroit game refs. Some of the worst refereeing I've seen in a long time. And the sample is pretty large.