Social Feed

S
Supporting Founder
Last reply · posted in TV Shows
VOOM HD NETWORKS' APRIL 2007 PROGRAM HIGHLIGHTS​

FOR IMMEDIATE RELEASE – VOOM HD Networks (www.voom.com) offers the most and the best high-definition programming on television. High definition promises a new way to experience television that immerses you in its amazing clarity, vibrant colors, and the feeling of "being there." Additionally, the Dolby® Digital 5.1 Surround Sound provides amazing life-like audio. VOOM delivers on this promise with 15 channels of great programming all in HD and commercial free. The leader in the industry, VOOM guarantees that all its programming is produced using state of the art high-def cameras (or re-mastered from original 35mm) and is broadcast in "true" high definition. Unlike other high-definition networks, VOOM doesn't up-covert standard-definition programs to the high-def format.

Available nationally on the DISH Network, VOOM has something for everyone this month! Details of the April 2007 program highlights are as follows. Photos are available to press upon request. Schedules are subject to change.

ANIMANIA HD—Eye-popping HD animation for all ages
RoboRoach
New episodes all month long, Airs everyday at 4:30 pm ET on DISH channel 9474
Get bugged out with ANIMANIA HD's presentation of the award-winning animated series RoboRoach. Based on a true story in which scientists in Tokyo experimented on cockroaches by implanting mini computer chips and camera on them, this fun cartoon follows the story of two bug brothers named Rube and Reg. When trying to escape from the scientist's lab, the brothers jump into an electrical plug, forever transforming Rube into RoboRoach—a half-robot half-cockroach. Rube is voiced by Scott Thompson, best known for his time as a member of the comedy troupe Kids in the Hall. The series for tweens, follows Rube's crazy adventures as the superhero of the town of Vexberg.

EQUATOR HD—The most extraordinary places and people on the planet
Keep it Green
Each Wednesday night at 8:00pm ET, New Host Premieres Wednesday, April 25th on DISH channel 9471
Every Wednesday night, VOOM HD Networks' EQUATOR HD focuses on important environmental and social issues facing our world with a special two-hour block of programming titled Keep It Green. Beginning April 25th, the series will be hosted by environmental expert Simran Sethi. Keep It Green combines EQUATOR HD's stunning high-definition documentaries and interviews with experts from pioneering organizations. The goal of Keep It Green is to educate viewers on these pressing issues, and most importantly, inspire people to action.

GALLERY HD—Stunning imagery and stories from the front line of the art world
Opera and an Omelette
Every Sunday at 12:00 pm ET on DISH channel 9472
Sunday brunch at GALLERY HD hits a high note with Opera and an Omelette! This Sunday afternoon series continues with more well-known operas from around the world. Co-host John Radwick, who has worked on stage and behind the scenes at New York's top opera houses, shares his passion for and vast knowledge of opera with "newbie" Michelle Maryk. Between acts, the two offer fun, light-hearted, and informative commentary about the operas as they enjoy a hearty brunch. Operas featured this month include productions of Barber of Seville (4/1), La Traviata (4/8), La Cenerentola (4/15) and Cosi Fan Tutti (4/22).

GAMEPLAY HD—The high definition channel leading the next generation of TV for gamers
GAMEPLAY HD TOURNAMENT ZONE: Global Gaming League's DigitalLife 2006
Monday nights at 10:00pm ET, First episode premieres April 2nd
on DISH channel 9485
GAMEPLAY HD continues to bring viewers the best and most coverage of video game tournaments from around the world. This month GAMEPLAY HD presents highlights from the Global Gaming League's DigitalLife Pro/Am Tournament 2006, the largest video game tournament on the East Coast. The top professional gamers traveled to New York City to compete for $100,000 in cash prizes. Amateur gamers were able join on-site competitions for fun, bragging rights, and great prizes. Games featured in the competition included Quake 4, Warcraft 3 and F.E.A.R. Watch all three episodes to catch all the heart-pounding action and get an all-access look at the personalities who make this burgeoning spectator sport "frag"-tastic.

VOOM's HDNEWS — The only HD source for 24/7 news, sports, weather
Coverage of the Winter Music Festival and Spring Break 2007
Special reports throughout the month of April on DISH channel 9482
HDNews goes deep inside the high-energy world of dance music with coverage of the Winter Music Conference in Miami. The conference is regarded as the premier networking event in the dance music industry, attracting professionals from over 60 different countries. Top international artists, DJs and industry professionals by the thousands join "Spring Breakers" to make Miami the most fabulous place to be during this time of year. HDNews will cover all the world class events as well as take an in-depth look at the fashion and music from the Spring Break scene.

RAVE HD—Music like you've never experienced it on TV before: the world's top acts in high definition and 5.1 Dolby® surround sound
The Rapture: Trabendo Sessions
Premieres Friday, April 6th at 9:00pm ET on DISH channel 9470
The Rapture's hit song Get Myself Into It,scored the group the number 19 spot on Rolling Stone magazine's "Top 100 songs of the year 2006." This one-hour concert special features the New York based rock quartet, recorded live in concert at the Le Trabendo concert hall in Paris. The band's music is a combination of several genres including post-punk, new rave, dance-punk, acid house, disco, and electronica.

TREASURE HD—The first channel for the 70 million people with a passion for collecting
Secrets of the Exhibit
New series premieres Saturday, April 7th at 12:00pm ET on DISH channel 9473
Hidden behind the staid atmosphere of most museums is a vibrant, exciting and often controversial world that pits science and physical evidence against philosophy and conjecture. Secrets of the Exhibit takes viewers deep into the fascinating world behind the orderly, perfectly labeled displays. From theft and authentication to forensics and fables, this series opens the doors that shield the average patron from the mayhem and mystery involved in the world of curators charged with the duty of capturing and preserving history. From medieval chain mail to dinosaurs, from war to works of art, each episode will engage the audience with stories that will surprise and intrigue.

ULTRA HD—The hottest fashion, the coolest styles and insight into the luxe life from around the world
Party Flash: Fashion Week Fall 2007
Premieres Monday, April 2nd at 10:30PM ET on DISH channel 9478
New York's most in-the-know Celeb photographer Patrick McMullan went behind the velvet ropes and into the hottest parties during New York Fashion Week Fall 2007. This season, McMullan hit parties hosted by top fashion houses Zac Posen, Marc Jacobs, Diesel, Rock & Republic and Heatherette. Move to the head of the V.I.P. line with McMullan as he interviews and snaps pictures of some the biggest "bold names" in the business including: designers Diane von Furstenberg and Zac Posen, Vogue's Anna Wintour; actors Rachael Bilson, Cuba Gooding Jr. and Michelle Rodriguez; singers Rod Stewart, Lenny Kravitz, Lil' Kim, and JC Chasez; and supermodels Helena Christensen and Amber Valletta.

WORLDSPORT HD—Live sports coverage from top worldwide arenas
SPANISH PREMIER LEAGUE (SPL) SOCCER
Airing on DISH channel 9477 - Check local listings for times
The World Cup's television ratings in America outpaced the World Series this year, introducing millions of new fans to players like Ronaldinho and Fabio Cannavaro. These superstars are part of the Spanish Premier League, widely acknowledged as the world's top soccer league. WORLDSPORT HD continues its live coverage of the SPL through June. Prior to each match, catch La Liga Report, a half-hour in-depth look at the league and at news surrounding the sport's most popular stars. Specific schedule details, including updates regarding player line-ups and start times, as well as La Liga Report highlights, are available online at www.worldsporthd.com.

VOOM HD: EVERY MOVIE FAN'S DREAM​
HUNDREDS OF TITLES FOR EVERY TASTE, ALL REMASTERED FROM 35MM INTO STUNNING HD​

FILMFEST HD—A non-stop film festival for movie-lovers of all kinds
New HD premieres this month on DISH channel 9480
  • The Russians Are Coming, The Russians Are Coming! (1966): Director Norman Jewison's hilarious cold war satire about a Russian submarine that lands of the coast of New England. Starring Carl Reiner and Alan Arkin, who is nominated this year for Little Miss Sunshine and got his first Oscar nod for this film (4/1 at 8:00pm ET)

  • The Bounty (1984): The fourth film dramatization of the 1789 mutiny aboard the H.M.S. Bounty. Anthony Hopkins stars as the notoriously hard-nosed Captain Bligh and Mel Gibson stars as the leader of the crew's mutiny. (4/9 at 8:00pm ET)

  • <LI class=MsoNormal style="MARGIN: 0in 0in 0pt; tab-stops: list .5in; mso-list: l0 level1 lfo2">Guys and Dolls (1955): Director Joseph L. Mankiewicz's film adaptation of the wildly popular musical about gangsters and the "Oldest Established Permanent Floating Crap Game in New York." Starring Marlon Brando as Sky Masterson and Frank Sinatra as Nathan Detroit. (4/8 at 8:00pm ET)
  • The Pride of the Yankees (1942): Gary Cooper plays American hero and fabled baseball player Lou Gehrig who rose up to become one of the sport's greatest players and then fell ill with a fatal neurological disease. (4/15 at 8pm ET)

  • Lawman (1971): In this Western, Burt Lancaster stars as a marshal dedicated to holding up the law at any cost. Problems ensue when he goes to a town to capture wanted men and the residents turn against him. (4/22 at 8:00pm ET)

  • The Night of the Hunter (1955): A terrifying atmospheric film about a psychotic phony preacher (Robert Mitchum) who hunts two children he believes are in possession of a large sum of money. This film stars Shelley Winters, Lillian Gish and Peter Graves. (4/24 at 8:00pm ET)

KUNG FU HD—All martial arts action, all the time
Masters Behind The Camera: Akira Kurosawa
Every Sunday night at 8:00pm ET
One of the most important figures in the history of film, Akira Kurosawa was a Japanese film director, producer, and screenwriter, whose career spanned over 50 years. His many awards include an Academy Award for Lifetime Achievement in 1990. Kurosawa devised distinctive cinematic techniques which continue to inspire films of today. For example, his film The Seven Samurai has been remade in versions including The Magnificent Seven, A Bug's Life and the current anime version Samurai 7 which can be seen on VOOM's ANIMANIA HD. Films in this series include: Hidden Fortress (4/1), Throne of Blood (4/8), Rashomon (4/15), The Seven Samurai (4/22), and a double feature of Yojimbo and its sequel Sanjuro (4/29).

WORLD CINEMA HD—Award-winning movies and stars from around the globe
New HD premieres this month on DISH channel 9475
  • The Story of the Weeping Camel (2003): Nominated for an Oscar in 2005, this film is told with both documentary and traditional narrative footage, tells the story of a nomadic family in Mongolia who goes to great lengths to coax a reluctant mother camel to accept her newborn colt. (4/6 at 8:00pm ET)

  • La Cage Aux Folles (1978): This Golden Globe Award-winning film is the wildly successful film adaptation of the farcical French play about a female impersonator who attempts to pose as straight upon meeting his son's future in-laws. The film was subsequently remade in America as The Birdcage. Director Edouard Molinaro received an Oscar nomination for his work on this film. (4/28 at 8:00pm ET)
5 Replies · 3487 views
dfergie
Thanks Sean, Billy Idol replays Sunday morning for those that forgot ( me!) on Rave...
S
Me too.. I am set to record in the am...
ripnbigc
Billy still rocks.
R
Anyone know if WorldsportHD will be covering the America's Cup sailing competition from Valencia, Spain like they have it the past?
kstuart
Anyone know if WorldsportHD will be covering the America's Cup sailing competition from Valencia, Spain like they have it the past?
I've emailed them to ask ! I hope they reply... I can't think of anything more suited to HD !
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 0 views
JSheridan
Lifetime Supporter
Last reply · posted in DISH Network Support Forum
I know HipKat said that they were working on conversions but we got the official news yesterday right from Dish that starting next month all DMA's will be on the western arc, and all customers will be assigned to that. That's gonna mean a lot of customers around here aren't gonna get Dish unless there are exceptions. Too many mountains and trees.
175 Replies · 5050 views
S
Even if you are broadcasting old SD-only shows, I would think advertisers would still want their commercials to look good.
  • Like
Reactions: charlesrshell
Jimbo
Even if you are broadcasting old SD-only shows, I would think advertisers would still want their commercials to look good.
Advertisers on SD channels are probably Far and Few, very hard to find, they have very few viewers to watch them.
  • Like
Reactions: charlesrshell
Mister B
Advertisers on SD channels are probably Far and Few, very hard to find, they have very few viewers to watch them.
I watch mostly SD channels (H&I, Start and ION, etc.). There are plenty of advertisers, this time of the year it is mostly Medicare Advantage plans, auto extended warranties and the occasional walk-in-tub. They know who is watching.
S
I watch mostly SD channels (H&I, Start and ION, etc.). There are plenty of advertisers, this time of the year it is mostly Medicare Advantage plans, auto extended warranties and the occasional walk-in-tub. They know who is watching.
can't forget the little blue m&m's
charlesrshell
can't forget the little blue m&m's
That's what my wife calls my Viagra!!
T
Why didn't Charlie end up launching starlink
  • Like
Reactions: charlesrshell
S
That's what my wife calls my Viagra!!
My gf is 29 years younger than me :shh
Almighty1
Why didn't Charlie end up launching starlink
He does not have the resources aka $$$ compared to Elon Musk as in reality, Elon can eat Charlie for lunch or even mop the floor with Charlie if he wanted to.
  • Like
Reactions: charlesrshell
S
ment to 20 yrs dam phone
  • Like
Reactions: charlesrshell
BradleyD
Dish should use both satellite and internet like they do now for all channels. Use either or or both.... like now but subscribers could choose something like internet only, or sat only, or both.
  • Like
Reactions: charlesrshell
S
Dish should use both satellite and internet like they do now for all channels. Use either or or both.... like now but subscribers could choose something like internet only, or sat only, or both.
They have sling tv wich sucks ass it needs a major upgrade
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68638 Replies · 2679310 views
  • Like
Reactions: c-spand
EatMyVolts
The 59th Street Bridge Song -- Simon & Garfunkel
long_time_Dish
52nd Street - Billy Joel
ClarkGable
Caribbean Queen - Billy Ocean
  • Like
Reactions: dishstaller
dishstaller
Don't Stop Me Now - Queen
long_time_Dish
Don't Stop Believin' - Journey
T
Last reply · posted in C-BAND Satellite Discussion
Howdy folks long time no write.

Issue(s): Horizontal transponders (esp. Weigel mux) breakup/mosaic/sputtering audio, JTV less so (but received perfectly up until a month or so ago.
Vertical is fine (Daystar). Up until recently couldn't even get any signal on Weigel Mux but JTV was perfect.

What I did to improve things: A slight westward move improved reception but only slightly (approx 72 on the micro HD, sorry no dB to post). I removed the 3-way C-Band splitter and used a 2-way to get a 1-2 db signal gain ( the power port goes to the Startrak - the micro HD doesn't have enough juice ! (1st clue) even after swapping the switching power supply it came with with a heftier linear 12 V supply (less RFI too !).
I have had issues with the uHD before signal breaking up that a reboot would clear up (clue #2 = dying tuner?) - FYI, I reinforced the IF input and removed all flux from the pcb completely with a Flux Removal Pen (MG Chemicals Cat No. 4140-P) which definitely makes a huge difference.

I went outside and pushed and pulled reflector slightly and no improvement. Pole (actually tower in yard - the neighbours love me..NOT) is plumb, checked with carpenters level. Dish was last peaked in 2017 or so, after overhauling 24" Von Weise, new Acme, fresh grease, etc. Focal length, f/d ratio etc meticulously adjusted. One panel has a tear so planning to repair that this weekend when my cousin comes over ( to help me out (old guy here) forecast calls for sunshine.

What has changed: My utility company has installed new high tension line poles (one smack dab in the middle of 101°W target! But they put it in last year and reception (of JTV (HOR) at least) was fine, BUT when they came out to transfer the wires over this year from the old (sawed in half) pole that's about when the troubles started (coincidence?), but again Daystar (VER) was fine. I always had this pole in the light of sight of 101° before with no issues. (fyi my zenith sat 74° is unobstucted, but can't test)

In the meantime Weigel mux is trying to break in MOSTLY in LATE at night (less cell usage?) (audio not video except for a frame here or there) so don't know what has changed with this mux which suddenly "woke up". I have never had to fuss with dish moves on this satellite ( the slightest move +/- motor clicks loses lock, wheres normally on C-band I can go significantly wider east or west and still have a strong signal ( have these gone "spot beam" or narrower somehow and what is the slight difference in Az listed on Lyngsat to 100.9° affect things ( isn't that the declination i.e. requiring a tweak of declination?).

Long story short (too late, ha), if I had another DVB-S2 box to try and / or a newer more stable PLL lnb ( I have been meaning to upgrade many a time but never got arround to it) I could determine if it's my antiquated receiving equipment, or my dish/feed alignment ( doubtful as it tracks everything from 55 °W to 133 ° W nicely.) or the dreaded 5G! (BUT only on HOR and not VER?).
I read another post where the OP (with his smaller 7.5 footer) played around with the illumination to peak desired transponder and reduce qrm on interfering/ stronger xpndrs (even on 103° W). So will play with that too - and cut away the RG-6 a and pull up a fresh section with new PPC and coax Seal. Open the throat cap see if any cobwebs are there and check servo operation (also changed in last maintence 10 years ago).

Finally, this will probably be the last chance I get to play with the BUD from the looks of it (providers leaving, auctioning off rest of spectrum imminent above 4.0 Ghz, and to keep the peace with neighbours so it would be nice to have that mux back for the long, cold and dark winters to comfort this old man before I call it quits and buy a VHF/UHF/FM Yagi and get MeTV, H&I from my Vermont local stations (checked at a friends today and they come in nicely - except ABC) .
Only one guy in town (Montreal) I may be able to get a receiver or PLL lnb from to try (RPS Sat) so hopefully with elimnate that as a possible culprit. Be nice to pick up a cheap or used PLL lnb to try w/o 5G BPF (money is tight )

Like others I couldn't care less about "tv" (well maybe just a liitle or a lot) it's the challenge that excites me , I can get MeTV other ways OTA (no pirate crap).

So what do you guys (and gals) think ?. p.s. I don't have a spectrum analyzer and there are def/ cell towers nearby (half a Km or so away).
Oh and time permitting will hammer out dings too and wire damaged mesh on one section for an extra dB or two. Hesitate to touch Declination, Elevation and pole mount but will play around with those a little too... Why is this mux for finicky suddenly ?(8psk, 5/6 fec, beamwidthetc.. man wish they went back to VER I think everthing would be fine! For the engineers out here does 5G QRM affect one poliarization (HOR) more than another (VER)? I understand the strong interference swamps out the input mixer/local oscilator in the hapless old C-band lnb (I think it at time affect KU too esp. LPB on 101°W KU - incidentally thos were weak or "gone' but are back almost at the time MeTV improved..hmm Terrestrial interference?

Any thoughts or suggestions ( cheap or free solutions please) greatly appreciated. Cheers.

p.p.s. Micro HD can't display Decades and Toons but records them fine so I can watch on another box/media player (Ali chip set issue). Another reason to upgrade.

Anybody interested in a nice C/KU system free ? (for next Spring/Summer 2027)

[Sami 10' mesh, Corotor II+, Eagle Aspen (very old) C-band lnb, Norsat Ku lnb, Channel Master C/Ku (H/V) switch, Startrak 400 Analog receiver w/ motor control, Geosat uHD DVD-S2, CW600S for Mpeg-2]
17 Replies · 647 views
arlo
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?
B
To me it looks like all of the intelligent things to diagnose the problem 'on the cheap' are being done.
I have my own thoughts of lnbf's using an external filter between the feed and coax. It would be cool to see what Brian could add.
Do his units have the filter before the actual LNA chip in the circuit? In other words, signal is focused at the lnbf throat. The probes for h & v polarity send the signal to.......filtering......then to the lna IC......
Or probes, lna, then filtering. Makes sense to trap the bad stuff before amplification to me.

On the cheap sometimes leaves questions. Enosat and El Bandido both use dvb-s pci cards and TBS USB receivers.
With those, and software. Signal analysis becomes sort of easy. Or tapping into your coax with a dc pass splitter, decoupling capacitor, and using a spectrum analyzer. Tuning across the LO band. Finding signal spikes. Digging deep.

Still making my decision on a (most probably) TBS PCIe tuner card. But I have tapped into my coax with my ancient but quite impressive HP spectrum analyzer and tinysa.
I don't have 5G interference so far that I know of. But have my suspects because I'm only able to snag signal from 131W in the winter when the leaves drop. But out of curiosity do scan it in the fall. And seem to be getting a signal that 'shouldn't' be there and a scan shows no channels. Far as I got.

An idea pops up to rig up an LNBF on a stick. Along with the tinysa and power supply and do some rogue signal searches. War Driving, of sorts. But. I wouldn't think that a chinabox, firmware based receiver would be of much help.
From what I see scanning across the frequency band. 5G cell transmission is always on and is very wide spectrum.
Whether anyone is actually using talking, texting, watching stupid human tricks on YouTube Makes no difference. The RF is there. So why would a C Band setup come and go? And what if you dumped the corotor and went modern voltage controlled polarity?

Another thought. Since you've learned the optimal position to place the scalar to illuminate out to the dish rim. And peaked the feed. There's most of a roll of aluminum flashing out in my garage that would most definitely wrap around my dish perimeter. That and a bag of large binder clips from the office supply. wally world. Ideas?
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!
S
I did some more investigating and found I got the MeTV mux in the early hours, until about 6am then the pixelating starts. Gets worse until around 8am its totally gone. I suspect my local cell tower is ramping up traffic as the morning goes on. My Titanium feed does a super job and most everything is clear that wasn't before but this mux is aggravating! I seem to just be over the signal threshold to work until the 5G total overwhelms my system. I'm using an old 9 foot spun aluminum dish and was wondering if I went to a 12 ft dish this would solve the problem? I know bigger is better in most satellite dish related signal problems. If this is true I will be searching for a bigger dish. I like your idea of flashing put around the dish perimeter. I have some I need to dig out and try before I start ripping out my dish. Anybody have any ideas if the bigger dish would do better? Any help would be appreciated!
8 1/2 Foot mesh here with the c140 lnbf and a verizon 5g tower nearby. Got no issue with the Metv transponder. Are you sure you have the lnbf setup correct? When I set my c140 up I noticed it was about 1/4 to 1/2 inch pushed in closer to the dish, sticking out of the scaler ring than my old lnbf was. Thought I may have trouble with that but my signal readings are higher than they had ever been.
B
8 1/2 Foot mesh here with the c140 lnbf and a verizon 5g tower nearby. Got no issue with the Metv transponder. Are you sure you have the lnbf setup correct? When I set my c140 up I noticed it was about 1/4 to 1/2 inch pushed in closer to the dish, sticking out of the scaler ring than my old lnbf was. Thought I may have trouble with that but my signal readings are higher than they had ever been.
Thanks for the info. I'll do a detailed feed alignment this weekend. I have to be on a ladder to tweak this 101w satellite with the MeTV mux. Luckily I've got a V8 Finder so I'll put that to use. Funny, I got the MeTV mux fine this Friday morning. Jewelry TV was completely garbled though. I'm wondering if I'm having 2 degree spacing problems more than the cell tower affecting me. Seems strange some days I'm fine and others MeTV is completely destroyed. In the old days I could just move the dish to 99w and see what's there adjacent to MeTV. Maybe if I optimize my feed I can eliminate my problem either way. I have a 9 foot spun aluminum dish that may not have the best two degree isolation. Some of these were crudely made with a poor parabolic shape. I'll keep you posted and thanks to all for the advice!
arlo
Just some rambling here. Be safe on that ladder.
Took me about 20 seconds looking at a YouTube video showing the V8 Finder in use. A spectrum analyzer display.
Well, Cool! And it can power an lnbf stand alone. More cooler.
Well there's your 5g interference wonderment solution. IF you had a spare C band lnbf. Put it on a stick and go "wardriving". If 5g towers are blowing out signals strong enough to cause interference in your dish. Well.....
And off-axis, not in the same direction as the dish is pointed? Don't exactly know.

Take a drive around and look at towers with microwave dishes bolted to them. You'll see that a large share of them do have a perimeter shield. Further diving into the likes of Andrews show shields as an optional add-on to do just what you think they should do. Block adjacent interference. Probably a good idea when multiple units are on the same, or adjacent towers. Ya' think?

Some not-so-many years ago when I dove into this whole dish antenna thing. I replaced the c/ku band corotor feed with a Titanium C2-W. Being a good boy. Assuming that the original scalar was in the proper position from day one back in the 80's. I followed instructions and stuck the unit in the hole and bolted it down at the stamped marking as per instructions. I got my first signal finally with the Zgemma H7. I was thinking "that's it?". Signal sucked.
Then I looked at how the corotor feed was located looking at the bolt marks on the tube.
It was like focusing a telescope or camera. In the end. I was getting pretty good signals. That was in the dead of winter. And I hate the cold.

A buttonhook feed support. Give a margin of adjustability versus perimeter arm scalar supports.
And a lot of reading and experimenting showed that although the scalar was probably where it should be. Isn't anymore. The focal length / fd ratio calculations probably are right. If you have a perfect parabolic dish.
Mine ain't. And its old. Most probably not a perfect parabola since it was. As well as the polar mount. Fabricated locally.
I spoke to the old guy who installed all of them here back in the heyday. Started installing Prodelin dishes.
Everyone was watching HBO and Playboy. At 3-5 grand a pop.
He told me that him and his sons made a concrete form. Finished with a plaster top coat. And started spraying resin and chopped fiberglass. Then a metal flame sprayer like is used to build up crankshafts and stuff. Finished with several more layers of 'glass. The rest. Polar mount, cast iron pole mount. Contracted locally.
That's the story. I took that old beast and if you've seen Pootie Tang. I juvenated it and then rejuvenated it.

I think that one thing to remember is that in an lnbf. All of the satellite signal amping is done in the low noise amplifier section. What signal is blown out to the coax is done in the intermediate frequency amplifier section.
So what comes in the waveguide is what it is.
I've used several receivers. Different Enigma2 images on the same receiver show different signal levels. It's a software thing. Signal calibration and display. Don't forget that. One image might not give a signal lock on a weak transponder. Fire up another? Look at the TNAP images. An option to display signal below lock.
The only real way to tell the absolute signal level you get in the house is to use a certified spectrum analyzer/service monitor.

BTW. I'm on MeTV right now. Book 'em Danno. Purposefully aimed off-axis just above the threshold of pixelation.
Only thing I see is that the sun came and the sun went. That's where I saw break up for a half hour or so.
B
Just some rambling here. Be safe on that ladder.
Took me about 20 seconds looking at a YouTube video showing the V8 Finder in use. A spectrum analyzer display.
Well, Cool! And it can power an lnbf stand alone. More cooler.
Well there's your 5g interference wonderment solution. IF you had a spare C band lnbf. Put it on a stick and go "wardriving". If 5g towers are blowing out signals strong enough to cause interference in your dish. Well.....
And off-axis, not in the same direction as the dish is pointed? Don't exactly know.

Take a drive around and look at towers with microwave dishes bolted to them. You'll see that a large share of them do have a perimeter shield. Further diving into the likes of Andrews show shields as an optional add-on to do just what you think they should do. Block adjacent interference. Probably a good idea when multiple units are on the same, or adjacent towers. Ya' think?

Some not-so-many years ago when I dove into this whole dish antenna thing. I replaced the c/ku band corotor feed with a Titanium C2-W. Being a good boy. Assuming that the original scalar was in the proper position from day one back in the 80's. I followed instructions and stuck the unit in the hole and bolted it down at the stamped marking as per instructions. I got my first signal finally with the Zgemma H7. I was thinking "that's it?". Signal sucked.
Then I looked at how the corotor feed was located looking at the bolt marks on the tube.
It was like focusing a telescope or camera. In the end. I was getting pretty good signals. That was in the dead of winter. And I hate the cold.

A buttonhook feed support. Give a margin of adjustability versus perimeter arm scalar supports.
And a lot of reading and experimenting showed that although the scalar was probably where it should be. Isn't anymore. The focal length / fd ratio calculations probably are right. If you have a perfect parabolic dish.
Mine ain't. And its old. Most probably not a perfect parabola since it was. As well as the polar mount. Fabricated locally.
I spoke to the old guy who installed all of them here back in the heyday. Started installing Prodelin dishes.
Everyone was watching HBO and Playboy. At 3-5 grand a pop.
He told me that him and his sons made a concrete form. Finished with a plaster top coat. And started spraying resin and chopped fiberglass. Then a metal flame sprayer like is used to build up crankshafts and stuff. Finished with several more layers of 'glass. The rest. Polar mount, cast iron pole mount. Contracted locally.
That's the story. I took that old beast and if you've seen Pootie Tang. I juvenated it and then rejuvenated it.

I think that one thing to remember is that in an lnbf. All of the satellite signal amping is done in the low noise amplifier section. What signal is blown out to the coax is done in the intermediate frequency amplifier section.
So what comes in the waveguide is what it is.
I've used several receivers. Different Enigma2 images on the same receiver show different signal levels. It's a software thing. Signal calibration and display. Don't forget that. One image might not give a signal lock on a weak transponder. Fire up another? Look at the TNAP images. An option to display signal below lock.
The only real way to tell the absolute signal level you get in the house is to use a certified spectrum analyzer/service monitor.

BTW. I'm on MeTV right now. Book 'em Danno. Purposefully aimed off-axis just above the threshold of pixelation.
Only thing I see is that the sun came and the sun went. That's where I saw break up for a half hour or so.
Well summing it up in one word...success! I spent about 2 hours tweaking the feed. Found I was almost 2 inches too far from the actual focal length. Plus adjusting the skew just a hair made a big difference. I measured 3 points around the dish from the edge to the outside of the scalar ring. One side measured 51 inches and the other 53, Adjusting the button hook feed I was able to get it 52 inches all the way around the dish perimeter to the scalar. I had my doubts this would fix anything but when I turned on the satellite finder I had all the channels in the MeTV mux coming in clear! No more fading away different times of the day and night. Plus the Jewelry channels are all solid also. I'm just wondering...did this just give me more signal to overcome the interference or did properly aligning the feed effectively "blocked out" the 5G interference? Sort of wondering about sidelobes in the old parabolic antenna manuals of the 80s. Just happy to have things working correctly now. Thanks to all who helped especially to Arlo who spent a lot of time commenting to me. Best regards!
primestar31
Well summing it up in one word...success! I spent about 2 hours tweaking the feed. Found I was almost 2 inches too far from the actual focal length. Plus adjusting the skew just a hair made a big difference. I measured 3 points around the dish from the edge to the outside of the scalar ring. One side measured 51 inches and the other 53, Adjusting the button hook feed I was able to get it 52 inches all the way around the dish perimeter to the scalar. I had my doubts this would fix anything but when I turned on the satellite finder I had all the channels in the MeTV mux coming in clear! No more fading away different times of the day and night. Plus the Jewelry channels are all solid also. I'm just wondering...did this just give me more signal to overcome the interference or did properly aligning the feed effectively "blocked out" the 5G interference? Sort of wondering about sidelobes in the old parabolic antenna manuals of the 80s. Just happy to have things working correctly now. Thanks to all who helped especially to Arlo who spent a lot of time commenting to me. Best regards!
Do NOT mess with it anymore just "trying to get it a tiny bit better" than you just got it... I've been through that HELL more times then I'd want to admit.
arlo
Very cool there Brown's. My intentions are good. Sometimes tact....not so much.
I'm glad you could read through the nebula of gunk.
If I can dig through my pictures directory you might pick-up a few things I've done to and made to get as perfect alignment as possible. Your journey shows how a bit of common sense and experimentation while using known guides as a starting point (at least). The phone book just isn't full of big dish service providers like way way back.

To help. A true parabola will converge all incident rays. Light, RF. At one single point. You kind of answered your question. Two inches too close/far from the convergence point (focus) degrades signal strength. If you ever get a chance to examine a telescope. The eyepiece is on a rack. You can adjust the position of the eyepiece distance from the objective. Depending on the eyepiece. The sharpest focus is only at one finely adjusted distance.
Make sense?
And for a telescope made with mirrors. The ultimate eyepiece aim. Imagining a tiny spot right in the center of the glass lens. Will be aimed exactly at the center of the mirror. A small mirror, prism, adjustment screws assists in attaining that perfect place where a star way way back in time shows as a perfect spot. Not an ellipse, etc.
Yeah.

Who knows about the 5g thing? Did your tweaks optimize where the receiver finally got enough usable DVB signal to lock onto them and reject 5g? The crowded room full of drunks thing?

Edit:
Yeah that tiny little bit can drive you nuts.The best and only way is to find a weak transponder on a sat that doesn't "swamp" signal levels. With a matching opposite polarity having close to the same signal level.
There will be a lot of tweaking with an extended arm and......thick cotton gloves. Your body, extremities, close to the lnbf will effect signals. Then just when you think you got it. In your case. Climb down the ladder and get out of the way to see what becomes.
I got obsessed and was out there in 10 degree winter on a step ladder on clear nights.
Tweaking elevation, azimuth, declination. Unbolted actuator gearbox and vice grips. Trying to get the best of the best tracking. Adding those porch rail stainless steel turnbuckles and catv messenger wire from the rim to the scalar to bring 'er back into kilter did wonders. Don't be me. Watch MeTV!
M
Last reply · posted in Over the Air Television By RabbitEars.Info
Interesting article about the work being done to develope an ATSC 3 converter box. Yes it does mention affordable.
11 Replies · 580 views
primestar31
DEATH TO NEXGEN!
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
Mister B
What bothers me is the total waste of broadcasting spectrum in this very crowded market. It has been almost three years now since KFOX converted their broadcast tower to ATSC 3.0 and moved all of their channels to other towers causing noticeable degradation of the picture quality.
I have a Sony TV with 3.0 capabilities but still use the 1.0 version of locals due to the fact that one or all of the 3.0 channels are often missing or unwatchable. In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.
The only thing that could motivate me to be interested in 3.0 would be if all of the minor networks (diginets) could be in at least 720P rather than blurry ultra-compressed 480i.
Three years is long enough to waste one of the few available RF frequencies in the area for this trial.
It is time to either move on with this experiment or call it quits.
navychop
In this city of 800K I doubt that more than a few hundred even know about ATSC 3.0.

They might notice the hand going into their pocket for their wallet.
  • Like
Reactions: FTA4PA
navychop
It is time to either move on with this experiment or call it quits.

QFT. Of course, my preference involves a curb and some kicking.
  • Like
Reactions: FTA4PA
S
star trek GIF


It's dead, they just don't know it yet. They killed it by forcing DRM on it, and that TOTALLY botched implementing it.

There is absolutely NO compelling reason for anybody to switch to ATSC3.0. They only want it as a total and complete money grab.
WHAT ABOUT THE INTERNET PART OF IT. NO ONE WANTS A BOX CONNECTED TO THE INTERNET EITHER.
navychop
Cough, cough. COVID vaccine implants.

:oldlaugh
  • Haha
Reactions: HIFI
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Love this guy's channel. Looks like Walmart has thrown in the towel when it comes to conventional car batteries.

I bought a new AGM battery from Walmart about a year ago, it is already needing replacing. I thought about just buying a regular battery but from what I've read, that might not be a smart move. Might check my Forscan program and see if I can change the battery type from AGM.


View: https://www.youtube.com/watch?v=awe7kY5nvdU
20 Replies · 283 views
harshness
When you need a battery, you need a battery.

If you can wait, new technologies are on the not-too-distant horizon.

You're probably doing something wrong if you're only getting a year out of an AGM battery. Heat and infrequent charging both significantly reduce lifetime.
dishstaller
You're probably doing something wrong if you're only getting a year out of an AGM battery. Heat and infrequent charging both significantly reduce lifetime.
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
Jimbo
Huh? How can I be doing something wrong.....I took out the original battery, that was 6 yrs old and put in a new one.....kinda hard to screw that up. I figure it was just a bad battery....it happens.


The biggest takeaway I got from this video was the Walmart batteries only had something like 85% of battery life left even though they were brand NEW. The ones from O'Reilly all tested 100% of life left.
And the Walmart ones mostly had very little warranty.

My last AGM (using now) I got from O Rielly's, its the Super Start ... I got the Platnium, they had several to choose from.
harshness
And the Walmart ones mostly had very little warranty.
The days of the 84-month warranty appear long gone, regardless of brand or where you acquired it. Warranties tend to be shorter, with much greater dependence on quick prorating.

The big problem for lead-acid batteries (whether flooded or AGM) is that the US no longer produces lead (the last smelter closed in 2013) and must import it.

Recycling covers a good chunk of the need (~70%), but it isn't free.
EarDemon
I've always got regular OEM Ford Motorcraft batteries from the dealership and have never really had an issue. On my old Lincoln Aviator (the SUV from the early 00s, not the CUV of today), I had some phantom drain and went though a few batteries, but that was an anomaly and with the standard warranty I got free replacements. Taking the Aviator out of the picture, I've bought two batteries in my 24 years of driving. One battery replacement in my Mountaineer, one in my Navigator. But I probably would have had another one had I kept it around longer. Didn't have the Bronco long enough, and so far still on the factory battery for my Expedition.

I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner. I'm in Buffalo, 90 degree summers and 0 degree winters. Once in a while in the dead of winter I'll get an alert from the Ford app saying remote features have been disabled to conserve battery, but it starts right up.
dishstaller
I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner.
warrior.webp
primestar31
I've always got regular OEM Ford Motorcraft batteries from the dealership and have never really had an issue. On my old Lincoln Aviator (the SUV from the early 00s, not the CUV of today), I had some phantom drain and went though a few batteries, but that was an anomaly and with the standard warranty I got free replacements. Taking the Aviator out of the picture, I've bought two batteries in my 24 years of driving. One battery replacement in my Mountaineer, one in my Navigator. But I probably would have had another one had I kept it around longer. Didn't have the Bronco long enough, and so far still on the factory battery for my Expedition.

I run more than the average bear. Dash cam, two radar detectors (yes, I'm aware that can be problematic when using simultaneously), laser jammers and a police scanner. I'm in Buffalo, 90 degree summers and 0 degree winters. Once in a while in the dead of winter I'll get an alert from the Ford app saying remote features have been disabled to conserve battery, but it starts right up.
But do you have a license plate mounted on your car? lol
EarDemon
Yes, but with smokey covers. I realize they are not a countermeasure for photos or photo radar, but it helps obscure from the average persons eyeballs. Plus with the way licensee plates peel around here, it keeps them protected from the elements.

When I went to a countermeasure meetup over the summer, one of the guys who's planning on doing a cannonball had a plate flipper. While I play fast and loose (pun intended) with these idiotic traffic laws, a plate flipper is something I wouldn't dare use. Although having one in the front to flip to no license plate when traveling though states that don't require one is tempting. Am I really going to get pulled over in Kentucky for having no front NY license plate? This way it cuts down on reflective surfaces and might be helpful with laser avoidance and gives the jammers a better chance to react especially on a larger vehicle. Although LEO is typically trained to hit headlights with their LIDAR.
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club
3 Replies · 42 views
Bobby
Rest in peace.
sdfntx
Sorry to hear this. R.I.P.
FTA4PA
R.I.P.
N
Last reply · posted in DISH Network Support Forum
My OTA is not working anymore. This started after the latest update. I have the OTA dongle with a OTA antenna that I've been using for years. My hopper does not recognize the dongle anymore and when I go to the OTA setting, it has a screen that says to plug a dongle into the USB. I tried unplugging and plugging back, in the same usb port and other ports. The Hopper does not recognize it. Anyone have same issue?
204 Replies · 5656 views
  • Like
Reactions: charlesrshell
dishstaller
Installed an off-air antenna a couple days ago for a customer who had just cancelled his Dish service. He had a dual off-air adapter and gave it to me. Cool. I'll keep it on the truck....might come in handy. Got to admit I don't watch anything as far as live tv goes anymore. Even if we have severe weather, our local channels will have a live feed on Youtube.
navychop
In other news, it was announced that the software fix for the two tin cans and a string will not be forthcoming. A hardware fix is required. However, that fix will let you receive stations from a gazillion miles away.

Truck roll charges may apply. Two year commitment required.
brittanygarden
Hi all. If you were using a single tuner USB OTA adapter that is no longer working, please PM me. Thanks. :)
Jim5506
Hi all. If you were using a single tuner USB OTA adapter that is no longer working, please PM me. Thanks. :)
I have the dual tuner OTA adapter currently connected, but I have 2 of the single tuner OTA adapters that I can quickly connect - neither is seen by my H3.
  • Like
Reactions: charlesrshell
B
Got the dual tuner OTA adapter, was able to set it up and get back my OTA channels. Thanks to everyone and extra thanks to the DISH reps in this forum!
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 22 views