Social Feed

X
Last reply · posted in General Home Theater Equipment
Has anyone got any opinions on this product? It sure looks nice. My only experience with Sharp is that I know they're a large manufacturer of LCD displays, so, in principle, this could be a good unit. One reason I'm interested is that it is supposedly able to handle PAL and SECAM input (which I need in addition to NTSC).

Also, this is the consumer product; the same display is also available in the LC-M3700 commercial display which, although it seems to have fewer consumer frills (no speakers, for example) is more expensive, presumably because it's more rugged - something that wouldn't necessarily be worth paying for in residential use, though its 60,000-hour backlight is replaceable (not sure about the Aquos version).

I'd be very interested in hearing your opinions or experience about either of these units.

Thanks in advance,

x
2 Replies · 2696 views
AndyMon
Did you post your qustion over at AVSForums? Probably the best place for a reply, IMO.
X
AndyMon said:
Did you post your qustion over at AVSForums? Probably the best place for a reply, IMO.
Thanks, good idea. I don't often go over there, but will give it a try.

x
HipKat
Pub Member / Supporter
· posted in The Sports Section

Jackson worked alongside Chris Berman for 30 years following a 14-year career with the Denver Broncos.


View: https://x.com/SportsCenter/status/2124525203719938293?a=d35eNh2Ior2Lc80RWVw&s=20


Longtime ESPN analyst and former NFL linebacker Tom Jackson has died. He was 75.

Jackson was a fixture on ESPN's NFL coverage after his playing career ended in 1986. He joined the network in 1987 and worked alongside Chris Berman for nearly 30 years until his retirement in 2016....
0 Replies · 9 views
BlackHitachi
Supporting Founder
Last reply · posted in Movie Talk
Since the Reds have there thread we should too!

Last watched Nine inch Nails
Next 3:10 to Yuma
5419 Replies · 514554 views
long_time_Dish
Watched this Sunday night.

1794960670598.webp
dishstaller
Apocalypto-poster01.webp
Foxbat
"Blade Runner" on Prime Video. It said it was the "Final Cut" which did seem to have some scenes that were more intense than I remember from my previous viewings. It's probably been ten years since I've watched this.

It's funny now how this move took place in November 2019 which was almost a half-century after it came out. We're still a long way from Nexus-level androids. And at least the CARB was able to avoid the smog and air pollution they portray in the movie. Computer displays did surpass those in the movie, but other than Tesla's 8 second Roadster jump, no flying street vehicles, Police or otherwise.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68940 Replies · 2703477 views
  • Like
Reactions: c-spand
harshness
Pour Some Sugar on Me - Def Leppard
Bobby
When It's Over - Sugar Ray
sdfntx
It's Over - John Mayall
gms49ers
Hand Over Fist - Rush
FTA4PA
Second Hand News - Fleetwood Mac
Almighty1
· posted in DISH Network Support Forum
Troubleshooting Indicator: If you Download ATV Files under Diagnostics > Receiver > Tools > TECHNICIAN SETTINGS and find that after waiting an hour or more, the selected file components do not all complete successfully and remain stuck in an incomplete or failed state, you will need to perform the isolation sequence outlined below to clear out the broken cache.

Why the "Download ATV Files" Loop Gets Stuck
When you trigger Download ATV Files under Diagnostics > Receiver > Tools > TECHNICIAN SETTINGS, the system treats it as a critical update deployment rather than a standard app download. If a few file segments fail to download or verify due to a local network hiccup, the system gets trapped in an unresolved "In Progress" limbo state.

A standard red button reset or letting the nightly system updates run will not clear it for two main reasons:

  1. NVRAM State Preservation: The Hopper 3 runs a customized Linux OS that writes active update installation flags directly to its NVRAM (Non-Volatile RAM). This safety feature prevents the receiver from getting "bricked" during an unexpected power outage. A standard soft reboot instructs the system to protect these logs, causing the bootloader to read the unfulfilled update tag on startup and immediately reload the stuck loop.
  2. The Hopper Plus Memory Handshake: The Hopper Plus is an independent Android TV computer with its own power supply. If you reboot the Hopper 3 but leave the Hopper Plus plugged into the wall, the Hopper Plus never resets. The millisecond the Hopper 3 wakes back up, the Hopper Plus re-establishes its hardware handshake and signals the receiver: "I am still awake, and I am still missing files." This immediate hardware trigger forces the Hopper 3 to instantly reload the "In Progress" flag back into active memory.

To clear it, you must create a temporary environmental vacuum that forces the Linux kernel to break its own safety protocols and abort the task.

__________________________________________________

Step-by-Step Isolation & Reset Instructions

Step 1: Kill the Internet Connection (Mandatory)
You must completely block the receiver from reaching the internet so it cannot instantly re-authenticate and fetch the broken file headers on boot.

  • If using Ethernet (with or without Wi-Fi backup): Physically unplug the Ethernet cable from the back of the Hopper 3 receiver. If you have ever used Wi-Fi in the past, you must also execute the Wi-Fi removal steps below so it does not fallback to wireless.
  • If using Wi-Fi Only: Clear out your saved network credentials using this specific remote sequence:
    1. Open the Diagnostics menu.
    2. Select Internet → Internet Settings.
    3. Press Info, then press Recall.
    4. Select Yes on the Clear Wireless Settings prompt.

__________________________________________________

Step 2: Execute the Hardware Reset

Path A: For a Standalone Hopper 3 (No Hopper Plus Attached)
Because a standalone unit handles everything inside its core satellite registers, it requires a complete electrical power drain to wipe the background cache. Using the front-panel power hold allows you to execute a true cold boot without unplugging cables from the wall.
  1. Disconnect the internet using the steps in Step 1.
  2. Open the front-right door panel on your Hopper 3 receiver to reveal the physical buttons.
  3. Press and hold down the large, square physical Power button (located on the far left of the row) for 20 to 30 full seconds. Note: The solid green power light will turn off immediately—keep holding firmly through an intentional out-loud countdown to completely discharge the board memory.
  4. Release the button.

Path B: For a Hopper 3 with a Hopper Plus Module
The presence of the Hopper Plus allows you to use a front-panel hardware override to clear the loop without reaching behind a heavy equipment stack to pull the Hopper 3's power cord, provided the external module is simultaneously isolated.
  1. Disconnect the internet using the steps in Step 1.
  2. Unplug the physical Hopper Plus power adapter directly from the wall outlet (this drops its independent data cache).
  3. Open the front-right door panel on your Hopper 3 receiver to reveal the physical buttons.
  4. Press and hold down the large, square physical Power button (located on the far left of the row) for 20 to 30 full seconds. Note: The solid green power light will turn off immediately—keep holding firmly through an intentional out-loud countdown.
  5. Release the button.

__________________________________________________

Step 3: The 30-Minute Timeout Buffer
Leave the system completely alone and undisturbed for 30 minutes.

When the Hopper 3 boots up completely offline with no network and no companion hardware attached, the update manager tries to read the pending download script and hits a hard boundary error wall. It will enter an internal background retry loop. Allowing it to sit for 30 minutes ensures that this background network clock completely expires, forcing the Linux kernel to finally abort the task, wipe the temporary memory stack, and flush the stuck "In Progress" text block under Diagnostics > Receiver > Tools > TECHNICIAN SETTINGS > Download ATV Files back to its clean default state. This window also ensures the system has ample time to safely detect and remount any connected external hard drives (EHDs).

__________________________________________________

Step 4: Reconnecting the Environment
After the 30-minute window has passed, the background tile will be completely flushed. Follow the specific path that matches your connection type:

  • For All Wired/Ethernet Setups (Standalone or with Hopper Plus):
    Plug your physical Ethernet cable directly back into the port on the Hopper hardware. The connection will initialize automatically. If you have a Hopper Plus module, you can now plug its power adapter back into the wall outlet as well.
  • For a Standalone Hopper 3 on Wi-Fi:
    Navigate back to your network settings and run the Wi-Fi setup again to enter your wireless credentials and connect the base receiver to your home network.
  • For a Hopper 3 with a Hopper Plus on Wi-Fi:
    1. First, plug the Hopper Plus power adapter back into the wall outlet and wait a moment for the status light to turn solid white and restore your video display link.
    2. Second, once the Hopper Plus is powered up, use your remote to access the network menus and perform the wireless Wi-Fi setup to re-authenticate with your home router.

PRO-TIP FOR HOPPER PLUS USERS: Once your internet connection is fully restored and you navigate back into Diagnostics > Receiver > Tools > TECHNICIAN SETTINGS > Download ATV Files, do not start a full download right away. Instead, isolate and download just the specific Hopper Plus files first. Letting those fully complete before running a full broad download will drastically lower the risk of hitting another partial packet validation failure.
0 Replies · 18 views
b4pjoe
Pub Member / Supporter Cutting Edge
Last reply · posted in Computers and Gadgets
6 Replies · 75 views
dishstaller
These companies are SO arrogant. Apple probably got pissed that regular people turned out to be more knowledgeable than the Apple "experts"....also got pissed because this community board allowed Apple product owners to figure out ways around Apple's "suggestions" not to mention all the things Apple tries to sneak in with updates.

Years ago I was on the Viasat community forum. Viasat employees were CONSTANTLY giving out inaccurate information. I would pop into the discussion and give the right answer or steer them in the right direction. I did all my own ordering, did all sales in the store, and I did my own installs and service calls so I was about as expert as you could be when it came to all things Viasat, plus I was on the dealer council. Did Viasat fire those employees since they clearly didn't understand the product or their jobs?? Heck no, Viasat booted me off the forum and blocked anyone from reading any threads that were over a certain number of days old.
navychop
No man is a prophet in his own land.
  • Love
Reactions: dishstaller
rvvaquero
No man is a prophet in his own land.
Jonathon Winters?
Juan
Jonathon Winters?
Actually its in the bible
Foxbat
Maybe Scott could spin off an Apple Support forum to take its place? That could get him some traffic…
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
214 Replies · 6797 views
  • Haha
Reactions: Mike0616
Y
So many losses this year. 3rd ranked Alabama has 2! No Ohio State in the playoff. Incredible stuff right now. Got to wonder, Wake Forest, Boise State, BYU... seem a bit misplaced, but what the heck, right? Get in with the record and see how they play in the playoff. Why should their easy schedule be held against them when other top teams are playing cream puffs too.
Jimbo
So many losses this year. 3rd ranked Alabama has 2! No Ohio State in the playoff. Incredible stuff right now. Got to wonder, Wake Forest, Boise State, BYU... seem a bit misplaced, but what the heck, right? Get in with the record and see how they play in the playoff. Why should their easy schedule be held against them when other top teams are playing cream puffs too.
Unfortunatelty, when they expand to 24 teams, your going to see 3 and 4 Loss teams get in, 3 loss for sure.

I still think they should have been Top 8 or 10 ... if your farther out, the chances of you winning enough Consecutive games against TOP teams is slim, unless you've been dropped from the upper tier after what they considered a Bad loss ...
Every team has a Bad day now and then ...

Btw, Ohio State, isn't completely Out of the Playoffs Yet, they played well last week and have the next 2 weeks to continue thier climb ... thier back up qb is starting to get comfortable ... that said, they would need to have Solid wins and help ... they would need to get to at least the #11 spot as they take away 2 spots in the top 12 for automatic bid ... Notre Dame and Group of 6, ND is playing thier way in this year, so thats not an issue, but Group of 6 is taking a spot each year without having a spot in the top 12...
Group of 6 need to build thier Own Championship series (I think it would be a Great idea)

My local team is one of those group of 6 teams, Yes they will beat a Power 4 team every so often, but do I realistically think they could win 4 games in a row against P4 teams, NO ...
  • Like
Reactions: Mike0616
osu1991
Funny Army pranked Navy by changing the seat back to say Go Army instead Go Navy at Annapolis


View: https://x.com/tom_iii_guy/status/2124177989730553997?a=8_7fh3kCVWMDKoqCLeQ&s=61
Ronnie-
Sheesh. Bad day for the Big 10 yesterday as far as playoff contenders go. They may go to having a single team in the playoffs at this point.

Interesting games however.
G
Last reply · posted in DISH Network Support Forum
After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
7 Replies · 936 views
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
  • Like
Reactions: charlesrshell
jsmit86
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Almighty1
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
  • Like
Reactions: charlesrshell
jsmit86
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
I think it is, but I am not aware of specific differences.
My original communication of the issue was very detailed, and they had the team work on it and felt they knew what was causing the issue.
The rollback to 708 confirmed that 708 did not have that problem.
I got an email in late October asking if I would be open to checking if a beta version had the problem. I agreed to the test, and it did not have the dolby problem.
david_jr
Not sure if it was this update or a previous one, but both my H3's had the bug where I couldn't use FF without screwing up the recording permanently. If I tried 60X for instance it would fast forward for a bit then go to the end of the recording and not let me get back to where I was trying to get no matter what. The temp fix was to use the skip ahead which for whatever reason still worked. Annoying having to skip ahead through 8 minutes or so of commercials on live sports talk recordings. Well it is now fixed, but not sure when that happened because I haven't had the nerve to try FF until this last week when I discovered it had been fixed. Working properly now on both my H3's. However my Dish Anywhere app is still not allowing me to use both H3's as feeds out. Tested this again a few days ago with my son and we both couldn't watch at the same time, even though we were connected to the other H3. If he was using DA and I attempted to use it with the other H3, it would bring up a message stating another user was using DA and do you want to take over. Very frustrating hoping they fix this soon.
jsmit86
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
I got updated to 715 last week, and I can confirm that it has solved the no dolby audio bug on 4K HDR events.
R
I got updated to 715 last week, and I can confirm that it has solved the no dolby audio bug on 4K HDR events.
When I watched the LSU/Texas A&M game in 4K HDR I was able to get dolby audio. I believe it was on ABC. I have the 715 update.
Van
Van
Last reply · posted in What's Cooking?
Who says dinner or lunch has to be the only good meals of the day?

Honey butter grits with scrambled eggs and grilled boneless pork ribs on flakey biscuits washed down with cranberry juice.
6648 Replies · 382727 views
TRG
TRG
This is from earlier. I've been in a biscuits and gravy groove lately.

bng1.webp
  • Like
Reactions: Bobby and dfergie
TRG
TRG
Chorizo, egg and potato burrito smothered in green chile sauce. Coffee.

20261118_125316.webp
  • Like
Reactions: Bobby and dfergie
TRG
TRG
It is cold and wet this morning. Made home fried potatoes, chopped bacon, chopped extra hot green chile and cheese topped with two over easy eggs. Big pot of steaming hot coffee. Comfort food at its best! I think I ate a little too much though.
  • Like
Reactions: Bobby and dfergie
dfergie
2 eggs over easy on top of hash browns, bacon and hot sausage about 6 am... (cooking fettuccine alfredo pasta for lunch)
  • Like
Reactions: Bobby and TRG
dfergie
2 eggs over easy on top of fried corned beef hash patty, 1 strip bacon, 1 sausage patty... Milk
  • Like
Reactions: TRG and Bobby