This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

52.0 Remote - How to program without Hopper.

That is a good question. With the older remote controls you could do that. Since these 52.0 remote controls are programmed via the hopper , 4k joey ,2.0 joey, I would say no, that they would be able to work with a tv by itself. But I haven't tried to do it myself.
 
As Mike said, the Hopper is what programs the remote. If you don't have a Hopper you can't program the remote. Or at least I doubt that you can since the older units most likely don't have the proper software to do it.

Sent from my samus using Tapatalk
 
Reactions: MikeD-C05
Not that I've seen. It is all done from menu selection on the Hopper.

Sent from my samus using Tapatalk
 
Reactions: MikeD-C05
Yes, you can, but you need to know the 4 digit code. It is programmed the same way as all remotes before. I believe something like Vizio would be 2505.
 
Thats great, what's are the steps getting the remote in programmable mode. I tried holding TV button down, but "TV" light did not stay on like the older remotes?
 
How long did you hold it down for? I did it on the 50.0, but I noticed I had to hold down the tv button significantly longer than on previous remotes.
 
Yes, and tv starts flashing. I'll see if I can make a video in a bit and upload it.
 
I have a new one that hasn't been setup and is still in packaging. I'll try it out with that one.
 
Be sure Limited Mode is set to Off in the Remote settings.
 
Bobby said:
That's just it, he doesn't have a Hopper hooked into the system... He wants to program it to use on his TV standalone... I think!
Click to expand...

Ohhh.. Thanks Bobby. I didn't remember the beginning of the thread.
 
Thats right, have a TV in a different location with free OTA TV, love the look of 52.0 and wish to be able to program it some how?
 
You must log in or register to reply here.

Similar threads

How do I program the input button on the side of the Hopper 3 remote?
Replies
3
Views
644
Bobby
52.0 remote no longer controls Hopper 3
Replies
8
Views
2K
videojanitor
B
Hopper remote to control an old dvd payer
Replies
1
Views
571
Altitudinous
Can hopper 3 be used without signal?
Replies
5
Views
840
renegade734
R
Challenging upgrade from VIP722 to Hopper with OTA and Limited Cabling How To Do?
Replies
3
Views
544
RJBreneman
R
Menu
Log in
Register