522 to 722 installation. Please help!

P

PurpleMilk

New Member

Original poster

Jul 12, 2011

2

0

C-Town

• Jul 12, 2011

• #1

Hey guys! My coworker is currently running a 522 in two rooms via a 1000 dish. Her and her boyfriend just purchased a 722 to replace it.

They aren't super savvy with this kind of thing, so they wanted me to install it for them. Since the 522 is also a duo dvr, would I just simply be able to unplug the cables from the 522 and plug them into the 722 and I'm done?

Any help would be appreciated, thanks!

 

MattG@DISH

SatelliteGuys Pro

Dec 30, 2010

3,871

243

Denver, Colorado

• Jul 12, 2011

• #2

Yes. You may need to change a couple settings in the receiver to get sat signal and TV2 working, but otherwise the cabling should be the same.

When you connect the 722, run a check switch test

 

P

PurpleMilk

New Member

Original poster

Jul 12, 2011

2

0

C-Town

• Jul 12, 2011

• #3

MattG@ DISH NETWORK said:

Yes. You may need to change a couple settings in the receiver to get sat signal and TV2 working, but otherwise the cabling should be the same.

When you connect the 722, run a check switch test

Click to expand...

Thank you very much, I appreciate the prompt response!!

I will post back in here if I have any problems. Thanks again.

 

MattG@DISH

SatelliteGuys Pro

Dec 30, 2010

3,871

243

Denver, Colorado

• Jul 12, 2011

• #4

That sounds great. Good luck