Hello,
I charged up the accutrac last night to align a new dish. This morning I aligned the dish and peaked it and when I looked at the receiver the levels were really low. I noticed that when the meter is hooked up to any lnb, it shows about 48 on the meter. This is on both a dish and directv lnb and on both meter inputs. This is with the lnb pointing to the ground. The meter will show 0 when it is not connected to anything. Anyone seen this before, I assure the meter is going bad.
I charged up the accutrac last night to align a new dish. This morning I aligned the dish and peaked it and when I looked at the receiver the levels were really low. I noticed that when the meter is hooked up to any lnb, it shows about 48 on the meter. This is on both a dish and directv lnb and on both meter inputs. This is with the lnb pointing to the ground. The meter will show 0 when it is not connected to anything. Anyone seen this before, I assure the meter is going bad.
