I hunted around but haven't found anything specific to adapting an FTA LNBF to a C-band co-rotor. Anybody have a link to a thread or a website showing details? Adapting a clamp can't be too difficult but how do you get the offset correct? Thanks.
Adapt an FTA LNBF to a BUD Co-Rotor?
- Thread starter Radioguy41
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 983
- Status
Not understanding what you are trying to do. Are you asking how to mount a KU LNBF on a C-band Corotor scalar?
Use a KU LNBF or KU Scalar/LNB designed for a prime focus dish. A regular LNBF is designed for a higher FD ratio and would only see a small portion of the reflector surface. Examples are the GEOSATpro SL1P or the Invacom ADF-120 scalar/feedhorn and n Inverto Black Pro C120 LNB.
The KU feed would be mounted on the horizontal axis of the dish. It could simply be strapped to the edge of the C-band scalar using a 1 3/4 pipe wall clamp or cut a slot in the C-band scalar to mount the KU feed as close as possible to the C-band feed and fabricate a clamp from a pipe hangar bracket to clamp the KU feed throat.
The KU feed would be mounted on the horizontal axis of the dish. It could simply be strapped to the edge of the C-band scalar using a 1 3/4 pipe wall clamp or cut a slot in the C-band scalar to mount the KU feed as close as possible to the C-band feed and fabricate a clamp from a pipe hangar bracket to clamp the KU feed throat.
- Status
