Apologies if this has already been answered.
What's the best way of hooking up the ASC-1 and C-band dish with a system that also includes a motorized ku-band dish?
Right now, I have the cable from the receiver going to a diseqc switch, port 1 off to the ku-band motorized dish and port 2 to the ASC-1.
This is working somewhat, although I'm getting really bad ku-band reception. Signal levels are really low, but the ku-band motor is getting signals to move.
On the ASC-1 side, sometimes the screen sees the ku-band Diseqc signals. For example, I'll switch the receiver to Galaxy 18 ku, which is position 15 in my receiver, and the ASC-1 shows 15 on its display. As it's on the other port of the switch, why is it seeing that command?
A faulty switch? Or I should be configuring this a different way?
What's the best way of hooking up the ASC-1 and C-band dish with a system that also includes a motorized ku-band dish?
Right now, I have the cable from the receiver going to a diseqc switch, port 1 off to the ku-band motorized dish and port 2 to the ASC-1.
This is working somewhat, although I'm getting really bad ku-band reception. Signal levels are really low, but the ku-band motor is getting signals to move.
On the ASC-1 side, sometimes the screen sees the ku-band Diseqc signals. For example, I'll switch the receiver to Galaxy 18 ku, which is position 15 in my receiver, and the ASC-1 shows 15 on its display. As it's on the other port of the switch, why is it seeing that command?
A faulty switch? Or I should be configuring this a different way?