Audio dropouts chan 72-79
- Thread starter axg9504
- Start date
- Latest activity Latest activity:
- Replies 32
- Views 4K
- Status
If you're using an H20 or HR20 and connecting to your television via HDMI you might try using component and RCA cables for the video and audio.
This will still give you an HD picture and seems to have helped solve the audio drop-out problem for some people.
It's worth a try!
Good luck.
I am using digital in to receiver for audio, sometimes I can pause then play to bring the audio back.
Pixelation problem update
So, finally, the Direct TV technician comes out. I explain the problem and immediately he says "signal strenght problem". he goes over to see the dish on the roof of the house and voila, problem solved. the issue was that the satellite was not positioned correctly. The dish is very heavy and was not secured appropriately so the weight caused the dish to angle down.
So, problem fixed after all the aggravation with DirectTV
So, finally, the Direct TV technician comes out. I explain the problem and immediately he says "signal strenght problem". he goes over to see the dish on the roof of the house and voila, problem solved. the issue was that the satellite was not positioned correctly. The dish is very heavy and was not secured appropriately so the weight caused the dish to angle down.
So, problem fixed after all the aggravation with DirectTV
I had the same problem (pixelation/audio dropout) with my last HR20-700. I thought it was my old 3 lnb dish, so when d* came out and replaced it free with the slimline, I thought that would clear it up. NOT. So I had the tech come out again and he said it was the receiver and had d* ship me a new one free ($20 is free?). Anywho, I got the new receiver about a week ago, hooked it up and everything was looking good, until today. Same exact problem. Here's the kicker, it only happens on input 1, input 2 is fine.
If anyone can help me out with this it would be greatly appreciated.
If anyone can help me out with this it would be greatly appreciated.
Sounds odd; no issues here, but I am working with an HR20-100; component and EIAJ optical audio (aka TOSlink)
I also have an update regarding the audio dropout problem (sometimes accompanied by pixellation). After complaining again to D* about the issue, I finally was connected with a home installation customer service representative who seemed pretty knowledgeable. He suggested something that hadn't been mentioned previously--interference affecting the BBCs. He said that the BBCs could be very sensitive to interference from electrical noise, and he arranged to have 2 new BBCs sent out to me free of charge. I hooked up the new BBCs on Sunday and I haven't experienced the audio dropout problem since then. However, I haven't had a whole lot of time to watch TV, so I can't say for sure that the problem is fixed.
UPDATE: I spoke too soon. The new BBCs did not fix the problem. I'm still getting occasional audio dropouts sometimes accompanied by pixellation. Looks like I'll need to try a new receiver if I want to resolve this issue. The crappy thing is that D* is telling me that my replacement receiver may be a -100, so I would lose the RF functionality of the remote. 
- Status
Similar threads
