Just received an AZBOX from Rick Caylor yesterday. Hooked it up this morning. Turned it on ---- Nada. And yes I know there is an on/off switch in back of the receiver. Plugged into 2 different power outlets and no boot - nothing. Sent quick email to Rick asking if he tests his receivers before shipping? Is there some arcane feature of the box I am overlooking?
AZbox Elite Trouble
- Thread starter fafhrd2
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 1K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Just found problem and solved it. Plugged receiver into wall outlet DIRECTLY rather than into the power strips I tried before. Will email Rick back and explain.
Good to hear. As an electrician, I applaud your fine troubleshooting . 
Rick does test the boxes before he ships. Generally he sets up a sat and scans in the channels to check for basic functionality.
My usual problem is hooking the cable to the loop out instead of the tuner input, since they're in the "wrong" positions .
Rick does test the boxes before he ships. Generally he sets up a sat and scans in the channels to check for basic functionality.
My usual problem is hooking the cable to the loop out instead of the tuner input, since they're in the "wrong" positions .
