hi everyone, I want to connect 2 fta receiver to a BSC621-2 C/KU LNBF; I have connected both fta receivers using an Ecoda 0/22khz switch everyone of them configured correctly but it seems I have connection problems sometimes I lose signal. What might be the problem? or DO I need C/KU Dual LNBF (that I have not seen) to connect the two receiver to my bud separately.
Forgot to mentioned that in one of the fta receivers I have a Diseqc 4 x 1 where I have connected my bud to port 1 and sats 110, 119 and 129 to the other switch ports. if I use my bud to only one receiver for instance the the one that already have the Diseqc switch I dont have any problem the problem comes out when I split the C/KU band signal with the Ecoda switch in order to see it in both receivers.
Hope some one have solved or figured out this issue before.
thanks.
Forgot to mentioned that in one of the fta receivers I have a Diseqc 4 x 1 where I have connected my bud to port 1 and sats 110, 119 and 129 to the other switch ports. if I use my bud to only one receiver for instance the the one that already have the Diseqc switch I dont have any problem the problem comes out when I split the C/KU band signal with the Ecoda switch in order to see it in both receivers.
Hope some one have solved or figured out this issue before.
thanks.