This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Can't get 72.7 on port 2

E

Endotheline

Member
Original poster
Jun 28, 2018
11
7
Ann Arbor
I can get a solid signal from 72.7 & 61.5 but my 1000.4 Dish will only get it through port 1 (as confirmed after running a check switch) I have tried covering the port 1 (77) and port 3 (61.5) lnbs with tin foil to help locate 72.7 on port 2 lnb but no luck. The check switch indicates good connection of port 2 and port 3 lnbs but the port 1 lnb is the only one that will lock on to any of the satellites. Need suggestions. Thank you
 
Reactions: charlesrshell
How are you determining that you only have a signal on port 1 of the LNBF head?
 
Assuming you are seeing 72, X, X then I would believe the LNBF head is broke.
 

If I'm not mistaken the switch matrix should read 77, 72, 61.5. If you're getting 72 in the first box then your alignment is probably off.
 
Reactions: pattykay
If the left box is 72 then the next box should be 61 and the third X.
 
You must log in or register to reply here.

Similar threads

W
Can't Get 110
Replies
12
Views
2K
WesTexican
W
S
Can't update an expired credit card
Replies
7
Views
677
Almighty1
R
Wally or Pathway 2 Issue?
Replies
3
Views
330
Tvland1
Get satellite and TP for channel on Hopper3
Replies
8
Views
837
RTCDude
Can't find SEC alternate channels.
Replies
11
Views
1K
zippyfrog
Menu
Log in
Register