Greetings everyone,
I'm Trying to get ideas on how to properly center a scalar ring and set skew on my 6 foot dish. My lattitude is 26.4N,Longitude 81.4w. I'm still struggling to lock on to 99.0W Galaxy 16, on a non motorized 6 foot dish.Galaxy 99w from my location requires elevation 53.5,Azimuth 221.4,skew 31.4 L skew.I'm playing around with the azimuth and Elevation and skew, using TP 4000 H 26400. When the dish was donated to me it had some plastic material on the scalar ring. I unscrew the material.I've measured from the edge of the dish to the scalar ring in three location and I got the same number,and turning the the C BAND LNB Counter clock wise since its calls for 31.4 L.I don't know the proper focal distance for this dish,so I'm just playing around with that.Any advice on centering a scalar ring, skew, and focal point setting is greatly appreciated.
I'm Trying to get ideas on how to properly center a scalar ring and set skew on my 6 foot dish. My lattitude is 26.4N,Longitude 81.4w. I'm still struggling to lock on to 99.0W Galaxy 16, on a non motorized 6 foot dish.Galaxy 99w from my location requires elevation 53.5,Azimuth 221.4,skew 31.4 L skew.I'm playing around with the azimuth and Elevation and skew, using TP 4000 H 26400. When the dish was donated to me it had some plastic material on the scalar ring. I unscrew the material.I've measured from the edge of the dish to the scalar ring in three location and I got the same number,and turning the the C BAND LNB Counter clock wise since its calls for 31.4 L.I don't know the proper focal distance for this dish,so I'm just playing around with that.Any advice on centering a scalar ring, skew, and focal point setting is greatly appreciated.