Checking signal strength on Hopper 3?

comfortably_numb

Dogs have owners, cats have staff
Original poster
Pub Member / Supporter
Nov 30, 2011
17,327
25,021
Kansas City / Las Vegas
IMG_0019.JPG
I'm having trouble checking signal levels. I go into Settings, then Diagnostics, then Dish. I'm not sure what to do then. It won't let me choose which satellite and which transponder, only active tuners. Is there a way to dial in a certain satellite and transponder number without having to be tuned to a channel on that transponder?
 
I just changed all 3 by going over one click and then selecting which one I want to change and then click on it. For example, I bring up Dish screen on Diagnostics. Next I arrow right and it brings me to Tuner. Now I arrow down and it brings me to Satellite. Once there I press Select and I get a drop down that allows me to change Satellites. So, If I am at 119 Inarrow up twice and it brings me to 110. Then I press Select again and I am on 110....
 
  • Like
Reactions: charlesrshell
I just changed all 3 by going over one click and then selecting which one I want to change and then click on it. For example, I bring up Dish screen on Diagnostics. Next I arrow right and it brings me to Tuner. Now I arrow down and it brings me to Satellite. Once there I press Select and I get a drop down that allows me to change Satellites. So, If I am at 119 Inarrow up twice and it brings me to 110. Then I press Select again and I am on 110....

When I try to change satellites, it shows a dash ( - )
 
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 5)