Scott Greczkowski said:Nope...
A DP34 does not work with a Dishpro plus seperator.
With a DP34 you would need to run two wires from the switch to the 622.
If you only want to run 1 cable to the receiver and use the seperator you need to use a DPP44 switch.
boba said:How many receivers are you planning on finally ordering? A DPP Twin will run 2 receivers (4 tuners).
Van said:Yep as RandallA said ( long time no see ) drop the dp34, run the 61.5 line to the input on the dpptwin and the line out of the twin goes to the seperator and your golden, sell the switch on ebay or in the paper or save it for a later time if you come up with another project.
bertbarndoor said:Hmm, there are three connections to the DPP LNB. One is the input for the 61.5, I understand that. The other two are outputs. I assumed that the other two worked like regular LNBs in that you would need both of them going to a dual receiver. Are you saying that only one of the outputs needs to go to the 622 and then the seperator can be used? As in my attached revised setup? Presumably if this were the case, I could run the second output to ANOTHER 622 somewhere else in my house with another seperator and have dual tuner functionality in two rooms?!
sA :: Shaggy said:yes w/ DishPro PLUS works like a DPP44 for 2 tvs.... so you could have a setup like this if you really felt like it...