This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Dish Network Information Update


why don't they just make the thing reversable that way people don't have to get a whole new dish just to move over to the 121 wing. seems like a waste of money to me. keep thinking DN techs, y'all will get it right one of these days.
 
I believe the 105 and 121 dishes are the same, they differ in the LNB mount at the end of the dish's arm. To switch between 105 and 121 you just need to attach a different LNB mount.
 
jlhugh said:
why don't they just make the thing reversable that way people don't have to get a whole new dish just to move over to the 121 wing. seems like a waste of money to me. keep thinking DN techs, y'all will get it right one of these days.
You don't need a whole new dish, but you do need a different feed assembly. It isn't flipable because of WHERE each LNB is.

On a 105 dish the 105 FSS and 110 DBS LNBs are in the center and the 119 DBS LNB is on the outrigger.
On a 121 dish the 121 FSS and 119 DBS LNBs are in the center and the 110 DBS LNB is on the outrigger.
On both dishes the FSS LNB is dead center of the dish. Obviously the spacing is closer on 119-121 than 105-110, and some adjustment would need to be made if one "flipped" the head. (Not to mention that the shroud isn't flipable).

Once the replacement assemblies are available for 121 it should be an easy fix, although repointing the dish is needed (centered on 121 instead of 105). FYI: A Dish500 is centered at 114.5 - splitting between 110 and 119.

JL
 
jlhugh said:
why don't they just make the thing reversable that way people don't have to get a whole new dish just to move over to the 121 wing. seems like a waste of money to me. keep thinking DN techs, y'all will get it right one of these days.

Also if someone only required an additional dish to be installed then that could be reversable by either repointing the dish or taking it down if not needed anymore without having to switch back to the old dish. Is this what you meant or did you mean that they should be able to switch the adapter that holds the lnbf's to accept 121 instead of 105?
 
in Scott's orginal post it read that they would need to exchange the 105 super for a 121 super. that tells me they are going to switch out the old dish. unless they worded it wrong.
 
Nice avatar jlhugh.

Glad that they have the SuperDish adaptable for just an lnbf assembly change to use 121 instead of 105 or vice versa. Are they going to be selling those adapters that's needed seperate without having to get the 121 dish to get the adapter?
 

All this stuff by the way was mentioned on the last Retailer Chat, and most of it was included in that chat's recap (at both, this site and "so-called other site") ... "Chit"! This war (this "chit") between you guys is rediculous... Grow up People!!! - hehe...

And even if someone DOES Copy/Paste - big deal! - it was done all the time among sites (long before satelliteguys even existed...)

justalurker - Duluth (Coming in Jan 04) is number 101 (they were counting 100 too at that retailer chat, until charlie (or jim) remembered about Duluth...
 
Scott, Darkman, or anybody that would know

On the 11/25 retailer chat, it's noted that Duluth, MN was coming to Dish500 in January

Last nite when Charlie talked about locals "coming soon", Duluth wasn't on there. I didn't look that hard but "maybe" those locals coming soon were SuperDish..

Which one is it?? Is Duluth coming January, or are they yet pushed off again...yet frustrating me even more.....

Thanks much!!! I learn more from this site than I do from the freakin Charlie Chats!
 
to repeat - at Retailer Chat was said - Jan, 2004

so all you can do is wait until then - lol