DMX 741 on a SAMO 10ft Mesh
- Thread starter sonyajon
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 1K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
Just installed the SAMI, not receiving anything
I am at 32 Latitude (4.66 Dec offset)
Elevation angle = 32.60, 90-32.60 = 57.4
Elevation angle 57.4-4.66 = 52.74 Declanation Set this at my North South 170.9 magnetic
Not getting any signal rwadings on my Moto 922, but signal meter is screaming when hooked up
Took the DMX741 off of a 6ft solid dish and it was working on that
Have aligned and centered the DMX741, SAMI calls for .38 FD
Should I add a conical ring?
I am at 32 Latitude (4.66 Dec offset)
Elevation angle = 32.60, 90-32.60 = 57.4
Elevation angle 57.4-4.66 = 52.74 Declanation Set this at my North South 170.9 magnetic
Not getting any signal rwadings on my Moto 922, but signal meter is screaming when hooked up
Took the DMX741 off of a 6ft solid dish and it was working on that
Have aligned and centered the DMX741, SAMI calls for .38 FD
Should I add a conical ring?
- Status
