I just purchased a new geosat pro 1200,After setting a pole and making sure the pole was plumbed I set up the dish and receiver with a small tv at the dish. I am trying to get the thai channels that I have read is on G19. I am recieveing the glory star net work which I am also told is on G19,after going back to factory default I am getting signal reading of 80% and a quality reading of 65% but the receiver will not do a blind scan and there is no picture. I have a universal lnbf 9.75/10.6 gh and rg6 cable with compression connectors. I am missing something or these channels are not on the same satellite as I have read but I cant seem to find any other satelites and I have rechecked the elevation and skew with two sites on the net and tried adjusting both. Here is the info on the screen I live in Guntersville,al 35976 thanks for any help.
Ku19
transponder 1182/22000 h
nit off
scan mode off
scan select single
Ku19
transponder 1182/22000 h
nit off
scan mode off
scan select single