I picked up a Glorystart dish and viviosat IV 200 PVR to see if I could get started. I was able to position the dish and pick up 97W on the #1 LNB. Swithing to the #2 LNB, 101W came through immediately. I'm struggling trying to connect both LNBs through a DiSEqC switch and see channels on both satellites. The only satellite that I see is the one coming through the #1 port on the switch. I tried another 4-way DiSEqC switch to no avail. I find the manuals to be less than enlightening. Am I missing something in the PVR setup? Thank you for your time.
Glorystar/visionsat setup
- Thread starter homebrew82
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 821
-
ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!
Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!
We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!
If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.
THANK YOU TO EVERYONE FOR YOUR SUPPORT!
- Status
In the Installation Menu on the Visionsat are you assigning one satellite to DiSEqC port #1 and the second LNBF to DiSEqC port #2?
The Visionsat is a great receiver. I have one and it works really well. Love the ability to record
- Status
Similar threads
