This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Help with 522 hookup

Mopee

Active SatelliteGuys Member
Original poster
Jun 7, 2007
16
0
Walla Walla, Wash.
I am hooking up a 522 with a quad lnb. I don't want to run two wires into the house. Is there a switch that will combine feeds from a couple or one of the lnb nipples to a switch then into a single wire then split the signa to the two feeds, sat 1 and sat 2, on the back of the 522?

m
 
Get yourself a DPP twin then you can use the DPP seperator on the 522 and only run a single cable. You could also go with a dish 1000.2 or DPP44 but those would be much more costly.