Help With New Dish Mover

[Gray1]

I need to buy a new dish mover and there listing the voltage as 36 volts to the motor. I have no idea what voltage I need. I got a STS 3000 and Uniden 4600. I want to get something that will work with a 4dtv receiver also. Are they all 36 volts? Do i need to measure mine? IF so how do i do it? Im looking at this one from
Sadoun. Do you think it will work?

eBay: Moteck 24" Heavy Duty LINEAR ACTUATOR Arm Dish Mover (item 160081758124 end time Aug-02-07 14:32:13 PDT)

My largest dish is 10 foot.

Thanks for the help

allen

 

[gabshere]

most older receiver pushed the dishes at 24 volts the newer ones at 36volts
my motor and its older can do both. von wise.

i think all the new motors sold do 36 volts but can do 24 ...... best to call and ask first.

 

[Gray1]

After taking a second look its an STS SR300 receiver. Below where the motor connects is says 38vDC. I took a DVM and took a voltage reading accross the M1 and M2 lines. It reads between 33 and 34v DC when I move the dish.

Does that mean I got a 36 volt motor?

Thanks
Allen