This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

help with setup

Status
Please reply by conversation.

domo324

New Member
Original poster
Sep 24, 2008
3
0
VS utral lite and GEOSAT pro 90cm statellite dish with universal Ku-Band linear LBNF (GSL1u-Bullet), try to hit Echo9 (121W), set the Elevation and LNB Skew according to dishpointer.xxx, spend 4 hours but no luck, got over 80% S but 0 Q, I also attached a pic from dishpointer. Live in ND. please help, thanks a lot.

Here is the settings

Satellite--------------Ecostar 9 121.0 W
Lnb------------------on
Lnb Type-------------Universal
Lnb High--------------10600
Lnb Low--------------9750
Tp Freq---------------11724
Disceq 1.0-------------none
Motor------------------off
Legacy Sw-------------none

Aslo please recommend a bird which is easy to hit with a linear LBNF?
 

Attachments

  • where.jpg
    81.1 KB · Views: 147
are you working with a fixed system or motorized?

If motorized you'd want to aim at your true south instead of 121 (dont know why you picked that...do you mean 123?)...NoDak would be a true south of 97 through 103 depending on where ya are

Also, that transponder on 121 isnt active..see thelist for active transponders

what other stuff do you have (ie: motor maybe?)

if its a fixed system, what satellite did ya want to aim at?
 

Thanks a lot, it's a fixed system and want to aim at EchoStar 9/Galaxy 23, what I should set for lnb High, lnb Low and Tp Freq?
 
There's nothing worthwhile on Ku-Band at 121w, but there's plenty on C-Band. He might be looking at those channels on Lyngsat, not realizing that they are C-Band.

Four digit frequency numbers are C-Band, and those channels will require at least a 6 foot dish and a C-Band LNB.
 
Status
Please reply by conversation.