Hopper unable to handle 2 dish remotes

[lucky86]

No, it's some specific command or something. It doesn't send a normal ir signal with a code like other remotes.

 

[JSheridan]

I'm sitting here with a 5.4 IR remote that works the Hopper in IR mode just fine. Am I missing something here?

 

[Joe Satellite Fan]

Ditto, I have a 5.0 remote and it works just fine with IR mode with my Hopper WS.

 

[JM42]

@lucky86 is talking about the Dish basic remote, not any of the standard remotes that shipped with receivers. The basic was a "simplified" remote with fewer buttons. Evidently it doesn't use the standard Dish remote codes if @lucky86 is correct (I have no experience with it).

Pretty much any standard remote in TV1/IR mode from Dish going way-way-back should work with the Hopper - just might not have all the needed/wanted buttons.

 

[Ozymandias]

the remote doesn't need to be close to pair. As long as you are within operating distance and system info is open, pressing sat should pair it

I've found I have trouble pairing remotes when I'm more than a few feet away from the box.

PLEASE LOG IN TO GET RID OF THESE ADS!

 

[thomasjk]

Sometimes you do have to be close.

 

[Ozymandias]

Sometimes you do have to be close.

10 feet or so seems to be the cutoff.

 

[lucky86]

Agree to disagree. Ive done it from across large rooms, as part of a joke