I need to know how to set the dish elevation on my Fortec 100cm. Also I need to know how it mounts on a SG2100 motor. Any help would be greatly appreciated. 
How do I set the Dish elevation on my Fortec 100 cm
- Thread starter xtra
- Start date
- Latest activity Latest activity:
- Replies 1
- Views 1K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
http://sadoun.com/Sat/Products/Fortec-Star/Dishes/FC100CM-39-inch-offset-ku-band-satellite-dish-antenna.htm
Looks like you have to lift the dish onto the SG2100 and tighten the u-bolts.
It also looks like you use the center of the nut on the elevation setting you need,good luck!
Looks like you have to lift the dish onto the SG2100 and tighten the u-bolts.
It also looks like you use the center of the nut on the elevation setting you need,good luck!
- Status
Similar threads
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
Who Read This Thread (Total Members: 1)
Latest posts
-
-
T
-
T