HWS & ota ?

[bnewt]

has anyone else experienced this.........

when going thru the ota channels......one time the channel will come in & the next I get a message saying the signal has been lost. I change the channel & then go back to the channel that I got the error message & everything is ok

 

[gdarwin]

You might have a signal that is too strong or a multipath problem.

 

[dwarren2]

I sometimes get that message for a second or 2 then the channel comes in.

 

[foghorn2]

This started after the latest firmware.

 

[KAB]

This started after the latest firmware.

No, been around a lot longer than that.

 

[larrykenney]

Yes, it happens here occasionally. It also can get confused on what channel it's not receiving. If you tune to a channel and it doesn't have a strong enough signal to produce a picture it'll put up the error sign, but the channel number shown is often incorrect. For example, I might have tuned to channel 6-1, but the error message will show 4-2.

 

[bnewt]

annoying, but maybe it will be corrected