Inventory Reduction Sale: B1Sat Bandstacked C Band LNBF

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Status
Please reply by conversation.

Sadoun

SatelliteGuys Pro
Original poster
Feb 27, 2005
2,320
1
Columbus, OHIO
Pro Brand - Eagle Aspen B1 SAT STACK C-Band LNBF With Scalar

Ok, we are running an inventory reduction sale on our C-Band bandstacked (single cable) LNBF

Limited Quantity Left - While Supplies Last.

I haven't seen anyone else selling these and if these are gone, they will be gone.
If you need the flexibility of using one cable only to feed multiple receivers from your C-Band dish, this is the one to get.


On sale for
$25
While Supplies Last

This LNBF is used for the C-band digital / analog satellite signal. It can be mounted on any Prime focus dish using the included scalar ring and mounting screws. LNB is designed for reception of signals in C-Band frequency range between 3.7 and 4.2 GHz. Ideally suited for reception of U.S. satellites.

  • Special for Digital C-Band Satellite Reception
  • Extended Frequency 3.7 GHz ~ 4.2 GHz
  • Bandstacked LNBF
  • L.O. Freq 5750
  • High Gain Output
  • Light Weight Design
  • 100% Waterproof
  • Adjustable Scalar Ring Included
Model NumberB1SAT STACK
I/P Frequency3.7-4.2 GHz
O/P Frequency
950-2050 MHz
LO FrequencyLower Band 5.15 GHz, Upper Band 5.75 GHz
Output Connector
Type "F" Female Connector
LO Initial Accuracy± 1MHz @ 25° C
Stability (-35°C to +52°C)± 2.0 MHz
LO Phase Noise
-60 dBc/Hz (@1kHz) -80 dBc/Hz (@10kHz) -90 dBc/Hz (@100kHz)
Noise Temperature
17 °K
Crosspol Isolation20 dB
Conversion Gain62 - 68 dB
Gain Flatness± 0.5 dB /27 MHz
Image Rejection
40dB (min.)
Third Order Inter modulation
-50 dBc (min.)
1 dB Compression Point0 dBm
DC Voltage
10 – 24 VDC (supplied by receiver through coaxial cable)
Output Impedance
75 W F-Female
Output VSWR
2.5 : 1
 
I bought a few of these last time they were on sale. They work very well... If you are contemplating an all-bandstacked system, this is a good choice. I only wish there was a C/Ku model, and that it blew away the other C/Ku LNBFs out there... :)
 
If you dont need a scaler ring the Ebay auction is a great deal. Might have ot pick up a backup :)
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)