lmb set up

[cheito]

i have a dish 301 reciver have two dish 500 one looking at 119,110 and the other at 61.5 and have a dish pro lnb the one that has the two otlets one on each side and the build in switch my question is i know that the outlet that says 119 i know that that goes into the reciver and i can get the 119,110 together now the other side that says 110 could i use that to get 61.5 ??? i havent hooked it up cause i am scared so need help thanks.

 

[NotMe546]

No you need an SW21 switch to connect all 3 satellites.

JVI 35-SW21X 2-in-1 Multi-Dish Switch

• SW21X Satellite Multi-Dish Switch.
• Used for Dish Network and Bell Expressvu.
• Works along with the SW21 to connect 3 dishes and one
• receiver to pick up signals from 3 SATs at 110 and 119 and 148 or 61.5.
• It can also work alone as a regular SW21 switch.
• Solder-backed
• 950 MHz–2150 MHz
• Compatible with Legacy DISH Systems

 

[cheito]

thanks i will try that

 

[Mr Tony]

actually he needs a DP21 because he has DishPro

and have a dish pro lnb the one that has the two otlets one on each side and the build in switch

 

[NotMe546]

actually he needs a DP21 because he has DishPro

Your right I missed that.

 

[sca]

or a dpp twin. it has an input for the 61.5
i didnt realize you could use a dpsw21 with a twin.

 

[Mr Tony]

a dp21 can be used to combine a DP Twin and a DP single/dual for 110/119 and 61.5 or 148 or 129 to one receiver

A DP34 is needed for more than 2 receivers

 

[sca]

a dp21 can be used to combine a DP Twin and a DP single/dual for 110/119 and 61.5 or 148 or 129 to one receiver

A DP34 is needed for more than 2 receivers

huh, never thought of doing that. i also never thought of using a dpp twin to aim at 61.5 as a solo orbital, but i see people do that a lot. i guess that works too.