moving to 110 w

dan franks

New Member
Original poster
Sep 6, 2007
2
0
I recently purchased a different package from Dish and it turns out that most of the channels are on 110 w. I am currently on 119 w.
Is it difficult to do the move with just the dish point on the reciever?
 
Register to hide this ad
the OP PM'd me and he is in the Carribean so a Dish500 is out fo the question :)

You can move the dish but the elevation would change a little bit. For me here in Minnesota its about 2 degrees
 
Dan, you need to upgrade your Dish to a Dish 500. It is a couple of inches wider but otherwise the same and can receive both 110° and 119° at the same time. The channels you have been watching at 119° are NOT at 110° so if you only move your current dish, you will be losing a ton of your regular channels.

[edit] NEVER MIND--I started my post before Iceberg's post was up so I wasn't aware you were in PR. You need a second dish. :) [/edit]

Take a look at Dish Network Channel Chart (Unofficial) to see where all the channels are in the sky on Dish.

And Welcome to Satelliteguys!

See ya
Tony
 
Currently using a 1.2m Dish on 110, and a 1.8m one on 110 in Caribbean, with no issues. I would definitely recommend that setup. I feel like I'm missing on all the HD fun though. What would be best choice for HD down there ? 61.5, 129 ?
 
Thanks

I tried the move today with the dish point signal with no luck. I found a chart that has the elevation of 119 at 33 deg. and 110 at 42 degrees. Is there a chance if I keep at it I can find it ? Sounds like the second dish and a switch is the way to go and not loose channels.
 

What is the size of the 622?

Updated 622 External Storage Information