Need a little help on re-installation of DISH antenna and coax cable location

  • ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!

    Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!

    We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!

    If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.

    THANK YOU TO EVERYONE FOR YOUR SUPPORT!

misterjerry

Member
Original poster
Apr 3, 2010
5
0
Lewiston, Idaho
I am hoping that someone might be able to give me a bit of technical info. In the past day or two, I have had my roof replaced and of course, the DISH antenna had to be taken off of the roof. Now my question involves to coax cable connection to the LNB. I have a single receiver hooked up to a single TV, and the LNB I have has 4 connections (LNB IN, 1, 2, 3). With this configuration, does that coax hook up to the LNB IN connection or one of the others?
If I had took off the antenna, I would have marked them so I could remember...grrrr
 
I am hoping that someone might be able to give me a bit of technical info. In the past day or two, I have had my roof replaced and of course, the DISH antenna had to be taken off of the roof. Now my question involves to coax cable connection to the LNB. I have a single receiver hooked up to a single TV, and the LNB I have has 4 connections (LNB IN, 1, 2, 3). With this configuration, does that coax hook up to the LNB IN connection or one of the others?
If I had took off the antenna, I would have marked them so I could remember...grrrr
Assuming you have Dish, Use port one.
The "in" port is for the use of a second or "wing" dish.
 
  • Like
Reactions: ChadT41

HWS hardrive going out?

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)