I'm trying to connect two FTA Dishes w/a KU Quad Universal l Linear LNB on each Dish and a Ecoda 4x4 22Khz Tone Switch. The each dish is picking up one Satellite. ( Galaxy 25 & Telestar 12). Can not get a signal to come through to TV. When trying with a Dual LNB and no switch getting good signal. So the problem is probably the setup I'm using. Also not sure of the proper settings on the receiver (OmegaSat 5700). First of all, are LNB & Switch I'm using compatable? Any suggestions guys? Thanks!
Need help connecting 2 FTA Dishes w/ Quad LNB and Ecoda 22Khz 4x4 Switch
- Thread starter ProSatMD
- Start date
- Latest activity Latest activity:
- Replies 2
- Views 1K
-
ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!
Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!
We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!
If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.
THANK YOU TO EVERYONE FOR YOUR SUPPORT!
- Status
22KHz switches are not compatible with Universal type LNBFs. Use a DiSEqC 1.0 or 1.1 switch instead.
The Universal LNBF has a built-in 22KHz switch for high/lo band switching, so an external 22KHz switch added into the mix does not work correctly.
Brian Gohl
Titanium Satellite
The Universal LNBF has a built-in 22KHz switch for high/lo band switching, so an external 22KHz switch added into the mix does not work correctly.
Brian Gohl
Titanium Satellite
- Status
Similar threads
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
Who Read This Thread (Total Members: 1)
Latest posts
-
T
-
-
I
-
TBengt's $100 Challenge: E-commerce Empire Built in Hours! #shorts
- Latest: TWiT Tech Podcast Network
