Need help with combining signals on one cable
- Thread starter jpesc
- Start date
- Latest activity Latest activity:
- Replies 3
- Views 1K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
You need a splitter, but in reverse.
This is how you should hook it up:
............................_____________
CABLE IN ------->|.......................|
...........................|....SPLITTER.....|----> Combined COAX (TO TV)
TV2 SAT OUT---->|____________|
Sorry for the bad diagram, but that is what it should look like.
Good Luck!
-Scott
This is how you should hook it up:
............................_____________
CABLE IN ------->|.......................|
...........................|....SPLITTER.....|----> Combined COAX (TO TV)
TV2 SAT OUT---->|____________|
Sorry for the bad diagram, but that is what it should look like.
Good Luck!
-Scott
What cable channels are active on your system? The output of TV2 has to be set for a cable channel that your cable system dosen't have a signal on.
It's also a good idea to pick a channel that has empty adjacent channels. So if 105, 106, and 107 are available, pick 106.
