Need help with combining signals on one cable

[jpesc]

I would like to combine my basic cable with the sat tv output #2 going out to my second tv. What all do I need, right now all I have is a cable from the satellite reciever going out to the tv.

Thanks

 

[sdschramm]

You need a splitter, but in reverse.

This is how you should hook it up:
............................_____________
CABLE IN ------->|.......................|
...........................|....SPLITTER.....|----> Combined COAX (TO TV)
TV2 SAT OUT---->|____________|

Sorry for the bad diagram, but that is what it should look like.

Good Luck!
-Scott

 

[boba]

What cable channels are active on your system? The output of TV2 has to be set for a cable channel that your cable system dosen't have a signal on.

 

[vegassatellite]

What cable channels are active on your system? The output of TV2 has to be set for a cable channel that your cable system dosen't have a signal on.

It's also a good idea to pick a channel that has empty adjacent channels. So if 105, 106, and 107 are available, pick 106.