Need Help

[fak005]

Team

I have following setup

- Dish 500 with twin DP LNB to get 110 and 119 birds
- Dish300 with single DP LNB to get 61.5
- DP34 swtich

The DP twin LNB has 2 outputs, however I have used only 1output from side of 119 and connect to port1 of DP34. I have connected output of DP single LNB and connected to port2 of DP34. However, my receiver only sees 119 and 61.5 birds.
I cannot see 110 and I know my satellite is pointed in right direction.
I was told that I could use any single output of twin LNB as that shoudl carry both 110 and 119 signal.

Please let me know what I am doing wrong
thanks

 

[Laddyboy]

Team

I have following setup

- Dish 500 with twin DP LNB to get 110 and 119 birds
- Dish300 with single DP LNB to get 61.5
- DP34 swtich

The DP twin LNB has 2 outputs, however I have used only 1output from side of 119 and connect to port1 of DP34. I have connected output of DP single LNB and connected to port2 of DP34. However, my receiver only sees 119 and 61.5 birds.
I cannot see 110 and I know my satellite is pointed in right direction.
I was told that I could use any single output of twin LNB as that shoudl carry both 110 and 119 signal.

Please let me know what I am doing wrong
thanks

That would be true if you were going directly to a receiver, but you are going into a switch before the receiver. You need two feeds from the Dish 500 to the switch, one for 110 and one for 119, and one from the 61.5.

 

[fak005]

thanks laddyboy for your help