J JohnH Godfather of the Uplink Reports Oct 5, 2003 3,013 1 Kansas City, Missouri Sep 11, 2007 #1 Would appreciate if someone can get the settings from their receiver. Not using a MPEG4 yet, but need to setup the dish anyway.
Would appreciate if someone can get the settings from their receiver. Not using a MPEG4 yet, but need to setup the dish anyway.
Bosco10021 SatelliteGuys Pro Aug 11, 2006 163 0 At the beach Sep 11, 2007 #2 Try using these sites : DishPointer.com - Easy Satellite Dish Pointing Dish Pointer Elevation: 37.6 Azimuth: 224.8
Try using these sites : DishPointer.com - Easy Satellite Dish Pointing Dish Pointer Elevation: 37.6 Azimuth: 224.8
J JohnH Godfather of the Uplink Reports Oct 5, 2003 3,013 1 Kansas City, Missouri Sep 11, 2007 #3 Those sites are quite nice, but they do not cover the installation of Multisatellite dishes such as the Slimline. The tilt figure is most important as the other figures are easily adjusted.
Those sites are quite nice, but they do not cover the installation of Multisatellite dishes such as the Slimline. The tilt figure is most important as the other figures are easily adjusted.
X xman111 Active SatelliteGuys Member Aug 15, 2007 17 0 Spokane Sep 11, 2007 #4 Tilt:65 degrees Elevation:38 degrees Azimuth:225 degrees.
J JohnH Godfather of the Uplink Reports Oct 5, 2003 3,013 1 Kansas City, Missouri Sep 11, 2007 #5 Thanks xman111. Welcome to Satelliteguys.
X xman111 Active SatelliteGuys Member Aug 15, 2007 17 0 Spokane Sep 12, 2007 #6 no problem, John and thanks for the welcome!