Openbox s9 problem

[Chickwalla]

Hi guys
I have a problem with my Openbox s9 . I tried to put a new sat file on it ( NM_HDS2_CMT_1101030405_CW.abs ) i used the RS232 port and saved a dump from my box then loaded the new file. Now when i turn on the stb all i get is ( on ) on the front panel. I dont know what to do .Any help would be appreciated .thanks in advance ..

I used the PVR800-Editor to do these file btw


Got it Fixed .....Ty Reloaded my Dump with serial loader and all is good

 

[N0QBH]

Dumping a known working sat file to a key drive from my Open Box saved me a lot of hassle when I installed a older version that messed up the receive. Like you, I reloaded my dumped file and was back in business. Backing up a known working configuration is probably just a good idea with a new box...

 

[Chickwalla]

Ya i did alot of reading on this site before i got my box .So i Dumped the file first. Lots of great help on this site so Read Read Read .