R rel16975 New Member Original poster Jun 28, 2011 2 0 Jun 28, 2011 #1 How to program ir 103602 to run tv Veiw sonic
isaacmorseMI SatelliteGuys Pro May 5, 2009 4,734 1 Southwest Michigan Jun 28, 2011 #2 Hold down the TV button and enter the code then hold down the pound key until the light flashes.
R rel16975 New Member Original poster Jun 28, 2011 2 0 Jun 28, 2011 #3 isaacmorseMI said: Hold down the TV button and enter the code then hold down the pound key until the light flashes. Click to expand... Didn't work
isaacmorseMI said: Hold down the TV button and enter the code then hold down the pound key until the light flashes. Click to expand... Didn't work
MattG@DISH SatelliteGuys Pro Dec 30, 2010 3,871 243 Denver, Colorado Jun 28, 2011 #4 What's the model number listed on the back, at the top of the remote? Should be something like 6.0, 20.0, 4.4, etc
What's the model number listed on the back, at the top of the remote? Should be something like 6.0, 20.0, 4.4, etc
MattG@DISH SatelliteGuys Pro Dec 30, 2010 3,871 243 Denver, Colorado Jun 28, 2011 #5 Press and hold TV until all of the mode lights are lit When you release "TV" should be flashing Press 566 Press # TV will flash 3 times confirming the code was accepted Test it out. If it doesn't work try it with 760 instead of 566
Press and hold TV until all of the mode lights are lit When you release "TV" should be flashing Press 566 Press # TV will flash 3 times confirming the code was accepted Test it out. If it doesn't work try it with 760 instead of 566