OTA Local HD disappear?

[like2watch]

I have a ViP 622. On Sunday I attached an indoor antenna because I want to record a PBS special in HD and DISH locals are not HD for my PBS stations. I did a scan and got 25 local HD stations, looked at them, programmed to record the shows, etc. Today I went to view one of them and got the error about the signal being lost. I tried re-scanning and got zero found. I did a front panel reset and it came back up with the lost signal error. I checked the connections (hadn't touched anything) and tried moving the antenna around a bit. No luck. Called support, got "advanced" tech who knew nothing. I had deleted all the stations hoping a rescan would pick up but still getting zero.

Any ideas?

Thanks

 

[TheKrell]

Is your indoor antenna an amplified model?

 

[bross]

Go to menu, system setup, HDTV setup, and make sure the analog type is set to offair. If it isn't, change it and then do a rescan.

 

[like2watch]

Go to menu, system setup, HDTV setup, and make sure the analog type is set to offair. If it isn't, change it and then do a rescan.

Thanks much, that did the trick. I had forgotten that I played with that setting.