Pansat 1000

Status
Please reply by conversation.
This assumes that it's not the ancient "BR-1000", which is an analog receiver from the early 1990s. Look for the words MPEG-2 somewhere on the receiver,
or examine the name plate for a full model number. (Are there any letters
before "1000"?)

Mike
 
Model 1000A

Hi, just say PANSAT 1000A Digital Satellite Receiver....
I do a automatica scan right now, but is sloww......I see if work later ....:)
 
Bad luck...

well, maybe have some trouble with tuner...just say 20% of level.....
I think is RIP....
 
if it shows 20% signal either the LNB isnt hooked up or the LO frequency iosn't correct

What kind of dish/LNB/etc do you have?
 
Config...

Have a Universal LNB (9750-10650) and the same config work with my TwinHan1020.....
Now check again and can read 20 % ALL the time, with cable or without cable is the same...
 
Status
Please reply by conversation.
***

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Who Read This Thread (Total Members: 1)

Latest posts