last week we have some rain and thunder
then the next day no signal with a 8'ft solid dish
useing a C & Ku-Band Co Rotor II Plus Adjustable Feed
with a Servo Motor Norsat 3115 C-Band and a 1207ku lnb.
so i move my v-box and my pansat 9500 outside closer to dish i have one diseqc
switch for ku and c-band,i replace switch and still no singal
i am on the arc so i know that is not the problem,the next thing
i check is the v-box it smell like it was burn but is is still moving the dish,i am thinking about opening the v-box to see if the input or the output side were burnt i used my singal meter for a more accuracy.
my signal meter is locking to sat but no quality on tv,is there a way i can test my
servo motor to know if its working and i am getting the right voltage? i have unscrewed my lnb and check
but i do not smell or see any evidence there were blown, any input.
then the next day no signal with a 8'ft solid dish
useing a C & Ku-Band Co Rotor II Plus Adjustable Feed
with a Servo Motor Norsat 3115 C-Band and a 1207ku lnb.
so i move my v-box and my pansat 9500 outside closer to dish i have one diseqc
switch for ku and c-band,i replace switch and still no singal
i am on the arc so i know that is not the problem,the next thing
i check is the v-box it smell like it was burn but is is still moving the dish,i am thinking about opening the v-box to see if the input or the output side were burnt i used my singal meter for a more accuracy.
my signal meter is locking to sat but no quality on tv,is there a way i can test my
servo motor to know if its working and i am getting the right voltage? i have unscrewed my lnb and check
but i do not smell or see any evidence there were blown, any input.