Re: [VOOM/DISH/OTA] Re: Voom and DVR 942

  • Thread starter Sean Butler
  • Start date
  • Replies 0
  • Views 1K
S

Sean Butler

Guest
Original poster
> I have the Sensar III. My TV has an ATSC tuner so I took the voom box
> out of line and now get now signal, so I definitely need the amp. I'm
> going to buy one of these:
>
> http://www.summitsource.com/prods/AMW937.html



Just to follow up, I bought one of these and it works fine. Took some
coax re-adjustments and a diplexer, but the Dish installer was able to
figure it all out. I was skeptical of his plan, but in the end it
works fine.

I pretty much get the same level of reception as when the voom stb was
powering the antenna -- I was hoping for a little bit better. Oh well.

Overall the 942 is a pretty nice set up, though I'm still learning it.
I've recorded several HD movies and it works like a charm and PQ is
good. Not quite as intuitive as tivo, but not terrible. There are a
ton of options for everything from HDTV set up, to TV1 and TV2 setup,
to the DVR options, etc. It will take a while to learn fully.

So far I'm happy with Dish and Voom10. I run TV2 on the 942 to the
rest of the house, still experimenting with dual vs. single mode.
Single gives PIP with 2 HD channels which is pretty cool. :)

The product sheet on dish's web page barely scratches the surface:

http://www.dishnetwork.com/downloads/pdf/product_brochures/942_Prod_SheetWeb.pdf

/Sean




------------------------
 

Similar threads

B
Replies
0
Views
2K
bluebird93@aol.com
B
B
Replies
1
Views
2K
Bruce Grodner
B
R
Replies
0
Views
2K
Robbie Brooks
R
T
Replies
0
Views
2K
Thomas Barthel
T

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts