Single Cable to Dual Tuner and Single tuner

[cleme1q]

I have Twin LBF attached to my dish with a single cable running from it to an existing dual-tuner. The single cable hooks up in to a separator which has two outputs going to the dual tuner.

Is it possible to have the separator output be the input to a switch so that i can connect both a dual tuner reciever and a single tuner reciever to the switch?

Is there any other way to have the dual tuner and single tuner run off of one cable?

thanks for the help.

 

[garys]

No, you have to run a second line from the lnb to the second receiver.

 

[vegassatellite]

Separators only work for one receiver, never for more than one. However, if you go with a single satellite setup such as 61.5 only and use a satellite rated high frequency power pass splitter on a DishPro setup, you can do multiple receivers with one line. However, you'll never be able to run multiple satellite orbital slots that way.